ADDX CRB110 Smart PTZ Camera Instruction Manual
- June 1, 2024
- ADDX
Table of Contents
- Packing list
- Product appearance
- Quick start
- Bind the camera
- Install the camera
- Share the camera
- Product specification
- Firmware upgrade
- FAQ
- Notice
- FCC Radio Frequency Exposure Statement
- IC Statement
- IC RF Statement
- EU Statement
- UK Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Smart PTZ Camera
Operation Instruction
Packing list
- Camera*1
- Bracket*1
- Power cable*1
- Power adapter*1
- Mounting kit*1
- Operation instruction*1
Product appearance
Quick start
-
Download and install the App The camera supports Android and iOS App. For your best experience, please download and install the App with your mobile phone as instructed below, and complete the user registration process in the App.
a) Go to the following link in your system browser to download: app.vicohome.io
OR
b) Scan the QR code to go to the link to download:
CAUTION: DO NOT use 3rd party QR code scanning tool or app to avoid scam or malware. Use QR code scanning app provided by your mobile phone system, e.g. the system camera apphttps://www.vicohome.io/download/ -
Add the device
Sign in to the App connect to Wi-Fi and add the device according to the prompts (please bring the device close to the router when configuring).
Bind the camera
- Click the “Add Now” button in the app, Connect the power cord of the camera, and the app will automatically search for devices that are on and not bound. Select the device you want to bind in the search results for the next step.
- Enter the name and password of the Wi-Fi network you want the camera to connect to.Click “Next” after completion, and the app can try to connect the camera to the Wi-Fi.
- After a while, the camera will play a sound indicating that the connection is successful. At this point, please set a name for the camera on the app and select the location where you want to place the camera. Click Finish to complete the pairing.
Tip: Due to the update of the app, the actual steps may be different. Please follow the instructions in the current app.
Possible problems with binding:
- When you hear the “Wi-Fi Password Error”, please check whether the Wi-Fi password you entered in the app is correct;
- When you hear the “Authentication error”, please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2;
- When you hear the “Wi-Fi not found”, please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the router is powered on;
- When you hear the “Retrieving IP timeout”, it indicates that the number of devices connected to the router in your home is too many to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices. You may need to contact the router administrator;
- When you hear the “Cloud service connection fail”, please check whether your router is connected properly to the external network. When you hear this error prompt,it is common on the condition of network disconnection or that the selected router in your home is a local area network server. Please ensure that the network connection is normal, and try to temporarily turn off the firewall to connect again.
Install the camera
You can place the camera on a table, shelf or other surfaces to use, or you can install it on a wall to use.
-
Select a good spot for your camera
Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. -
Install the bracket
Fix the camera to the desired location. You can directly place the camera on a flat surface or fix the bracket to the wall or ceiling by screws, and then screw the camera to the fixed base.
Share the camera
You can use this feature when you need to use the camera with other family
members or friends.
CAUTION: Only the admin user who has bound the camera for the first time
can share and set up the camera, while other members can only view the live
video or video playback feature of the camera.
- For admin user of the camera, find the camera you wish to share on the app homepage or camera settings screen, then click the share button and enter the Share page. Click “Device Sharing” to generate a shared QR code.
- For users who need to be shared with, click “+” on the homepage and select “Add Friend’s Device” to enter the scan code page.
- After the shared user successfully scans the QR code on the admin user’s mobile phone, the admin user will receive a confirmation notification, then click “Accept” to complete the camera sharing.
Product specification
Item | Specification |
---|---|
Horizontal angle | 355° |
Vertical angle | 110° |
Field of view | 91.8° |
Image resolution | 2304×1296 |
Video bit rate | Adaptive |
Image coding | H.265,H.264 |
Audio | Duplex two-way audio |
Storage media | Micro SD card (Up to 128GB) |
Night vision light | Infrared light |
Network | 2.4&5 GHz Wi-Fi |
Power | DC 5V/1A |
Operating | -10° ~ 45° C |
Size(LxWxH) | 4.55×2.83×2.83(in) |
Firmware upgrade
When you connect your camera through the App, it will prompt you if the latest
firmware is available. You can also manually check the firmware version in the
settings of the App.
Please do not cut off the power supply during the upgrading.
FAQ
1.Q:How do I invite family and friends to use my camera together?
2.Q:Why doesn't the Wi-Fi name appear when I bind my camera?
3.Q:Will the camera show red lights when night vision is activated?
A: The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment.
4.Q:What are the requirements for Wi-Fi?
A: The camera support the 2.4Ghz/5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required.
5.Q:How far should the camera be placed from the router?
A: After testing, the Wi-Fi connection distance can normally reach up to150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible.
6.Q:How to quickly view videos by category?
7.Q:What should I do when the device is in malfunction?
A: Reconnect power. If the device is still not working, you can long press the reset button for 5 seconds to remove all the malfunctions of the device (the original data will not be lost at this time), and reconfigure the device.
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference;
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20 cm.
Notice: Shielded cables
This equipment generates,uses and can radiate radio frequency energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
IC Statement
This device complies with Industry Canada Licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES003.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
EU Statement
This product complies with the radio interference requirements of the
European Community. Hereby, this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. This
product can be used across EU member states.
This product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
**** This symbol means the product must not be discarded as household waste,
and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
UK Statement
This product complies with the radio interference requirements of the United
Kingdom Declaration of Conformity.
Hereby, this product is in compliance with Radio Equipment Regulations 2017.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>