hansgrohe Zesis M33 Single Lever Kitchen Faucet 150 Instruction Manual
- June 14, 2024
- hansgrohe
Table of Contents
- hansgrohe Zesis M33 Single Lever Kitchen Faucet 150
- OTHER MODEL
- Safety Notes
- Installation Instructions
- Technical Data
- Symbol descriptions
- Assembly
- Adjustment
- Operation
- Dimensions
- Flow diagram
- Spare parts
- **** Maintenance
- Test certificate
- CUSTOMER SUPPORT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
- 93395000
hansgrohe Zesis M33 Single Lever Kitchen Faucet 150
OTHER MODEL
-
Zesis M33 150 2jet
74800XXX
Zesis M33 150 Eco 2jet
74810000
Zesis M33 150 2jet
74816000 -
Zesis M33 160 2jet
74801XXX -
Zesis M34 150 2jet
74814XXX
Safety Notes
� Gloves should be worn during installation to prevent crushing and cutting
injuries.
� The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honored.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
Technical Data
| Operating pressure: | max. 1 MPa |
|---|---|
| Recommended operating pressure: | 0,1 – 0,5 MPa |
| Test pressure: | 1,6 MPa |
| (1 MPa = 10 bar = 147 PSI) | |
| Hot water temperature: | max. 60°C |
| Thermal disinfection: | 70°C / 4 min |
Symbol descriptions
-
Do not use silicone containing acetic acid!
-
Adjustment
-
Maintenance
-
Dimensions
-
Flow diagram
-
Spare parts
-
Special accessories (order as an extra)
-
Adapter (G⅜ / G½)
93395000
-
Cleaning
-
Operation
-
Test certificate
| Fault | Cause | Remedy |
|---|---|---|
| Insufficient water | Aerator calcified, dirty | Clean aerator, replace as |
necessary
Mixer stiff| Cartridge defective, calcified| Exchange cartridge
Mixer dripping| Cartridge defective| Exchange cartridge
Water escaping at the threaded base| O-ring at the connection hose defective.|
Exchange O-ring
Hot water temperature too low| Hot water limiter incorrectly set| Set hot
water limiter
Assembly
Adjustment
Operation
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
Zesis M33 150 2jet 74800XXX
Zesis M33 160 2jet 74801XXX
Zesis M33 150 Eco 2jet 74810000
open
Zesis M34 150 2jet 74814XXX
Zesis M33 150 2jet 74816000
close
hot
cold
Zesis M33 150 2jet CoolStart EcoSmart 74812000
open
close
**hot
cold**
Dimensions
Flow diagram
- Normal spray
- Regular
Zesis M33 150 2jet 74800XXX
Zesis M33 160 2jet 74801XXX
Zesis M34 150 2jet 74814XXX
Zesis M33 150 2jet 74816000
Spare parts
(see page 44)
Zesis M33 150 2jet 74800XXX
Zesis M33 150 2jet 74816000
Zesis M33 150 Eco 2jet 74810000
Zesis M33 160 2jet 74801XXX
Cleaning
Cleaning recommendation / Warranty / Contact
| |
---|---|---
**** Maintenance
The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
Test certificate
74800XXX PA-IX 17554/IO DM0748| X
74801XXX PA-IX 17554/IO DM0748| X
74810000 PA-IX 17558/IO DM0748|
74814XXX DM0748| X
74816000 PA-IX 17554/IO| X
CUSTOMER SUPPORT
Hansgrohe · Auestraße 5 – 9
· D-77761 Schiltach ·
Telefon +49 (0) 78 36/51-1282
· Telefax +49 (0) 7836/511440 48
E-Mail: info@hansgrohe.com
· Internet: www.hansgrohe.com
References
- Taps for bathrooms, showers and kitchens
- Banyo ve mutfak için musluk ve armatürler
- Banyo ve mutfak için musluk ve armatürler | hansgrohe TR
- Taps for bathrooms, showers and kitchens
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>