EUFAB 11232 Frame Holder Lockable Instruction Manual

EUFAB 11232 Frame Holder Lockable

Product Information

Specifications

• Art.-No.: 11232
• Art.-No.: 11233
• Length:
  • 11232: 120 mm
  • 11233: 300 mm
• Spacer: 25 mm and 30 mm
• Weight:
  • 11232: 0.450 kg
  • 11233: 0.655 kg

Product Usage Instructions

Proper Use of the Product
The frame mount is used to secure a bicycle to the U-bracket of a bicycle rack. The lockable knob nut offers the bicycle additional protection from theft.

Scope of Delivery
Includes lockable knob nut, spacer, frame clip, and lock screw M8.

Safety Precautions
Read operating instructions carefully before use. Do not allow children to use the device. Not designated for commercial use.

Operating Instructions
Follow steps to mount and secure the bicycle using the frame holder.

Mounting the Frame Holder
Assemble all parts securely and insert the plug back into the top of the bracket cuff.

Securing a Bicycle Using the Frame Holder
Rotate the knob nut to open the frame clip, insert the bicycle frame, align properly, and tighten the knob nut securely.

Maintenance and Care
Regularly check for any wear or damage. Clean as needed to ensure proper functioning.

Notes Regarding Environmental Protection
Dispose of product responsibly according to local regulations.

Contact Information
EAL GmbH Otto-Hausmann-Ring 107 42115 Wuppertal, Deutschland

• Email: info@eal-vertrieb.com
• Website: www.eal-vertrieb.com

FAQ

• Can the frame holder be used for commercial purposes?
  No, the frame holder is not designated for commercial use.

• How should I store the product when not in use?
  Store the original packaging, receipt, and instructions for future reference. Ensure all parts are intact before each use.

WARNING!

• Please read the operating instructions carefully prior to use and observe all safety instructions!Not observing such may lead to personal injury, damage to the device or to your property!
• Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please include these operating instructions as well. Please check the contents of package for integrity and completeness prior to use!

PROPER USE OF THE PRODUCT

• The frame mount is used to secure a bicycle to the U-bracket of a bicycle rack. The lockable knob nut off ers the bicycle additional protection from theft.
• This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device.
• The device is not designated for commercial use.
• Use according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observance of the safety notes. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damage or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.

SCOPE OF DELIVERY

• 1 x Frame mount
• 1 x Rubber insert ø 25 mm
• 2 x Key
• 1 x Rubber insert ø30 mm
• 1 x Operating instructions

SPECIFICATIONS

Art.- no.:| Length| U-shaped bracket Ø| Bicycle frame Ø| Weight
---|---|---|---|---
11232| 120 mm| 25 und 30 mm| 30 – 60 mm| 0.450 kg
11233| 300 mm| 25 und 30 mm| 30 – 60 mm| 0.655 kg

SAFETY PRECAUTIONS

• The warning triangle indicates all instructions which are important for safety. Always follow these otherwise you could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the frame mount!
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
• If the frame holder is visibly damaged, safe use is no longer possible. The frame holder may thus no longer be used.
• Observe the safety precautions in the instructions for your bicycle rack!

OPERATING INSTRUCTIONS

1. Lockable knob nut
2. Spacer
3. Frame clip
4. Lock screw M8
5. Tube
6. U-bracket cuff
7. Plug
8. Rubber inserts Ø 25 mm and Ø 30 mm

MOUNTING THE FRAME HOLDER

Before you can use the lockable frame holder, you must first dismantle it. First unscrew the knob nut. Now remove the spacer and the frame clip. Place the thread of the lock screw onto a firm surface and carefully push the tube in the direction of the surface. The screw head will now push the plug out of the U-bracket cuff . Pull the lock screw out completely. Wrap the appropriate rubber insert for your bicycle rack around the U-bracket at a suitable position for your bicycle. Open the bracket cuff and place it around the rubber insert. Push the bracket cuff to close. The rubber insert may not be folded or crushed as you do so. Replace the lock screw. First fit the frame clip and then the spacer onto the threaded end of the lock screw. The curved side of the spacer must face the frame clip. Push the frame clip together and push in the direction of the bracket cuff to expose sufficient thread of the lock screw. Now put the knob nut onto the thread and then tighten securely to ensure that all parts are fitted and brought together. Insert the plug back into the top of the bracket cuff .

SECURING A BICYCLE USING THE FRAME HOLDER

• Rotate the knob nut anti-clockwise until the frame clip has opened sufficiently to accommodate the bicycle frame. Insert the bicycle frame into the frame clip. Rotate the knob nut clockwise until the frame clip loosely encompasses the bicycle frame. Align the bicycle and the frame holder to ensure that it all fits together. Now tighten the knob nut firmly.
  You can only lock the frame holder when it has been closed securely.

• Insert the key into the lock of the knob nut and turn so that the red marking faces the lock icon. Remove the key. Your bicycle is now secured to prevent theft.
  CAUTION
  Before travelling, you must first secure the bicycle in accordance with the instructions of your bicycle rack (tensioning straps, safety strap etc.)
  The frame holder may result in minor pressure points on the bicycle frame and damaged to the paintwork. Protect the bicycle frame, for example, using protective film.

MAINTENANCE AND CARE

• Clean the frame holder using a slightly moist, soft cloth and a mild cleaning agent. Do not use aggressive cleaning agents, solvents or petrol. Ensure that no cleaning agents or liquids enter the tube of the frame holder.
• Occasionally lubricate the lock with a resin-free oil.
• Store the frame holder in a dry place.

NOTES REGARDING ENVIRONMENTAL PROTECTION

• Dispose of the frame holder in accordance with the laws and conditions in your country.
• The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation or other forms of reusing waste equipment!

CONTACT INFORMATION EAL GmbH

• Otto-Hausmann-Ring 107 42115 Wuppertal, Germany
• + 49 (0)202 42 92 83 0
• + 49 (0) 202 42 92 83 – 160
• info@eal-vertrieb.com
• www.eal-vertrieb.com

References

• vertrieb.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>