EUFAB 17520 Car Mobile Phone Holder User Manual

: June 3, 2024
: EUFAB

Table of Contents

EUFAB 17520 Car Mobile Phone Holder
INTENDED USE
SCOPE OF DELIVERY
SPECIFICATIONS
- SAFETY PRECAUTIONS
OPERATING INSTRUCTIONS
MAINTENANCE AND CARE
CONTACT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUFAB 17520 Car Mobile Phone Holder

EUFAB-17520-Car-Mobile-Phone-Holder

INTENDED USE

The smartphone holder for cars serves to attach cell phones or na-vigation devices to the dashboard, sun visor or rear-view mirror in cars.
This device is not designed to be used by children or persons with li-mited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device.
The device is not designated for commercial use. Intended use also includes following all the information in this manual, especially following the safety instructions. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damage or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.
WARNING
Please read the operating instructions carefully prior to use and observe all safety instructions! Not observing these may lead to personal injury, damage to the device or to your property! Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please include these operating instructions as well. Please check the contents of package for integrity and completeness prior to use!

SCOPE OF DELIVERY

1 x smartphone holder for car
1 x Instructions for use

SPECIFICATIONS

Dimensions (L x W x H): approx. 90 x 85 x 165 [mm]
Weight: approx. 0.100 kg
For smartphone with a max. with: 95 mm

SAFETY PRECAUTIONS

The warning triangle sign indicates all instructions which are important for safety. Always follow these otherwise you could injure yourself or damage the device.
Children may not play with the device.
Cleaning and user maintenance may not be carried out by children without supervision.
Do not treat packaging material carelessly. It may become a dangerous plaything for children!
Use this product only for its designated purpose.
Attach the smartphone holder for cars and your smartphone in your vehicle in a way that does not impede your vision or your movements. This also applies to cables that care connected to your device.
The smartphone holder for cars and the connecting cables for your device are not located near your air-bag. Check your vehicle manual or ask a car workshop where the airbags are fi tted in your vehicle.
Before driving off , check that the holder and the mobile phone are attached tightly and securely and cannot come loose when the car is driving.
Do not manipulate or disassemble the unit!.
For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!

OPERATING INSTRUCTIONS

OVERVIEW

1 Holding clamp for smartphones
Unlocking
Holding arm
Spring clamp
Support

MOUNTING THE SMARTPHONE HOLDER
Before mounting, check whether the smartphone holder is suitable for the selected mounting point, see Pictures 2 to 4. EUFAB-17520-Car-Mobile-Phone-
Holder-2

Open the spring clamp (position 4 in the overview), Picture 5 and place the smartphone holder onto the dashboard of your vehicle. Proceed as follows when mounting to the sun visor or the rear-view mirror.

FITTING THE SMARTPHONE INTO THE HOLDER
Squeeze the locks (position 2 in the overview) together. The holding clamps 8position 1 in the overview) move apart. Place your smartphone between the holding clamps. Release the lock again, your smartphone is now affi xed in the holder.
The holder can be turned so that the display is either upright or crosswise. You can set the tilt angle with the holding arm (position 3 in the overview), Picture 6.

In the case of leather-coated or foamed surfaces, there is a risk of permanent dents, especially when there are high temperatures on the inside. Therefore remove the smartphone holder, whenever it is not needed.

MAINTENANCE AND CARE

The smartphone holder for cars is maintenance-free when used in accordance with the intended purpose. Clean the smartphone holder for cars with a soft, dry cloth only. Do not use any aggressive cleaning agents or solvent-based cleaners.

INFORMATION ON ENVIRONMENTAL PROTECTION
Dispose of the smartphone holder for cars in accordance with local regulations.