EUFAB 21083 Chargeable Mini Compressor Instruction Manual

EUFAB 21083 Chargeable Mini Compressor Instruction Manual

WARNING
Read the operating instructions through carefully prior to initial use and observe all of the safety notes!
Not observing such may lead to personal injury, damage to the device or to your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please include these operating instructions as well.
Please check the contents of package for integrity and completeness prior to use!

PROPER USE OF THE PRODUCT

The chargeable mini compressor can be used e.g. for inflating motorcycle and bicycle tyres, balls and toys.
Thanks to the programmable automatic shutdown, the objects can be inflating with air without exceeding their optimum operating pressure.
The digital display can be used to monitor the filling process.
The device also has a USB connection for charging the battery of mobile phones, smartphones, tablets, MP3 players and similar devices and an LED light.
This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device.
The device is not designated for commercial use.
Intended use also includes following all the information in this manual, especially following the safety instructions. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damage or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.

SCOPE OF DELIVERY

• 1 x mini compressor
• 1 x air hose with adapter auto-valve
• 1 x charging cable (USB A – USB C)
• 3 x adapter (bicycle valve, ball, inflatable leisure article)
• 1 x storage bag
• 1 x Instructions for use

SPECIFICATIONS

Type: LS4008
Dimensions (L x W x H): approx. 81 x 38 x 125 [mm] Weight approx. 0.410 kg (without accessories)
Input voltage: 5 V DC
Input current: 2 A
Operating voltage: 12 V DC
Maximum pressure 8 bar / 120 PSI
Length air hose: 200 mm
Power rating: > 36 W
Battery capacity: 800 mAh (8.8 Wh)

SAFETY PRECAUTIONS

• The warning triangle sign indicates all instructions which are important for safety. Always follow these otherwise you could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• Do not treat packaging material carelessly. It may become a dangerous plaything for children!
• Use this product only for its designated purpose.
• Do not manipulate or disassemble the compressor.
• Do not leave the compressor unattended during operation.
• Never increase the air pressure for the inflatable objects above the manufacturer’s recommendation.
• If the compressor makes unusual sounds or overheats, switch it o immediately and allow it to cool down for at least 15 minutes.
• Check the compressor before commissioning. Damaged, torn or broken parts should only be repaired by qualified technicians.
• Never expose the compressor to frost, rain or temperatures above 30°C or below – 30°C.
• Never use on people or animals.
• Ensure that the hose does not come into contact with sharp edges, oil or hot objects.
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer.

EXPLANATION OF SYMBOLS

   Complies with EC directives
Labelled electrical products may not be disposed of in the household waste
Labelling according to § 17 BattG (German battery laws): The end consumer is obliged by law to send batteries to the dealer for proper disposal or to hand them into an appropriate collection point.
Devices with this symbol may only be operated indoors (dry environment)
Read the operating instructions

OPERATING INSTRUCTIONS

OVERVIEW

1. Display

2. Setting buttons

3. USB output

4. USB charging connection

5. LED light

6. Connection for the air hose

7. Pre-setting ‘Ball’

8. Presetting ‘Auto’

9. Presetting ‘Motorcycle’

10. Presetting ‘Bicycle’

11. Display in PSI

12. Display in BAR

13. Display in kPa

14. Display in kg/m²

15. Display Battery charging status

16. Display tyre pressure

17. Display presetting tyre pressure

18. Switch LED light

19. Button for increasing the pressure presetting

20. ON/OFF switch

21. Button for increasing the pressure presetting

22. Selector switch presetting / unit settings

CHARGING THE BATTERY

Connect the USB charging cable (Position 23 in the overview) with the USB charging connection of the compressor (Position 4 in the overview). Connect the other end of the USB charging cable to a USB charger. The display for the battery charging status (Position 15 in the overview) is activated in the display. During the charging process, the segments of the charging status display shine one after another. Once all four segments shine permanently, the compressor’s battery is fully charged.
After charging, first disconnect the charger from the power socket and then disconnect the compressor from the charging cable. Always maintain this sequence.

Checking the charge status

Press the ON/OFF switch. (Position 20 in the overview) for approx. 3 seconds. The display is activated. The battery symbol shows the charging status (empty, 25 %, 50 %, 75 %, 100 %)

USING THE COMPRESSOR

Setting the TARGET pressure
Press the ON/OFF switch (Position 20 in the overview) for approx. 3 seconds. The display light is activated. Pressing the selector switch several times for a longer period (Position 22 in the overview), you can set the unit for the pressure:
PSI → BAR → KPA → KGF/CM²

You can set the target pressure with the buttons and (Position 21 and 19 in the overview), these can be read in the display ‘TARGET’ (Position 17 in the overview).

 Automatic/controlled lowering of the air pressure is not possible with this device.

Connecting the air hose
Screw the end with the outer thread of the air hose (Position 24 in the overview) into the connection of the compressor (Position 6 in the overview).

Filling a tyre with the auto valve
If you want to fill a tyre with the auto valve (Schrader valve), you do
not need any of the separate adapters.

Open the lock on the valve connection
Figure 2

Place the valve connection on the valve
Figure 3

Lock the valve connection
Figure 4

You can now fill the tyres using the compressor
Figure 5

Using the adapter
Open the lock of the valve connection, Figure 2. Insert the right adapter for the application into the valve connection. Lock the valve connection, Figure 4. Place the adapter onto the filling connection of your bicycle or recreational article (ball, air toy etc.).

Bicycle valve adapter (for Dunlop and Sclaverand valves) (Position 27 in the overview):
Open the lock of the valve connection, Figure 2. Insert the right adapter for the application into the valve connection. Lock the valve connection, Figure 4. Place the adapter onto the filling connection of your bicycle or recreational article (ball, air toy etc.).

Bicycle valve adapter (for Dunlop and Sclaverand valves) (Position 27 in the overview):
For Sclaverand valves: Undo the knurled screw of the valve piston and push down briefly once.
Screw the valve adapter, using the knurled crown, down onto the bicycle valve.
Place the valve connection of the air hose onto the bicycle valve adapter, like the auto valve, Figures 2 to 5. You can now start the compressor by pressing the ON/OFF switch and fill the bicycle tyres. On completion of the filling process, remove the air hose and the adapter from the valve.
For Sclaverand valves: Tighten the knurled screw of the valve piston again.

Adapter for balls (Position 26 in the overview):
Place the adapter for balls into the valve connection as shown in Figures 2 to 5. Insert the adapter into the valve of the ball. Now you can
switch on the compressor and fill the ball.

Universal adapter for recreational articles (Position 25 in the overview):
Place the universal adapter into the valve connection of the air hose as shown in Figures 2 to 5. Insert the universal adapter into the filling connection of your leisure equipment. Depending on version, it is possible that the universal adapter will need to be held firmly during the filing process.
Now you can switch on the compressor and start the filling process.

Filling process
Press the ON/OFF switch for the compressor (Position 20 in the overview) to start the filling process.
The compressor starts, the pressures can be read on the display during the filling process (Position 16 in the overview).
Once the set target pressure is reached, the compressor switches off.

 Only allow the compressor to work without interruption for maximum 5 minutes.
Then allow the compressor to cool down for at least 15 minutes before continuing to work with it.

Switch off
Press the ON/OFF switch (Position 20 in the overview) for 3 seconds, the device is switched o . If no switch is pressed, the device switches off automatically.

LED light
You can switch the LED light (Position 5 in the overview) on and o with the button (Position 18 in the overview).

MAINTENANCE AND CARE

MAINTENANCE

Store the mini compressor in a dry, frost-free place. If the compressor is not used for a longer period, charge the battery every 3 months.

CARE

Switch the mini compressor o before cleaning. Clean the housing with a soft, dry cloth. Do not use any aggressive cleaning agents or solvent-based cleaners. Never allow liquids to ingress into the housing.

NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical devices with the household waste! Electrical and electronic scrap must be collected separately and disposed of in an environmentally responsible manner for recycling. Please contact your community or city administration regarding disposal options for electrical and electronic scrap.
The battery cannot be removed. Dispose of the entire device.

Information about battery law
In connection with the sale of batteries and accumulators and of devices that contain batteries and accumulators, we would remind you of the following as stipulated in § 18 of the German Battery Act (BattG):
Batteries and accumulators may not be disposed of in the household waste system. As an end consumer you are obliged under law to return spent batteries and accumulators. You can return the batteries and accumulators free of charge to a communal collection point, retail outlets or directly to us (address in section 9).

Old batteries may contain pollutants or heavy metals that could damage the environment or cause physical harm. Batteries can be recycled because they contain important raw materials such as iron, zinc, manganese or nickel.
Batteries and accumulators that contain pollutants are marked with the symbol of a crossed-out waste bin and the chemical name of the pollutant.

Here, Cd stands for cadmium, Hg for mercury and Pb for lead.

CONTACT INFORMATION

**EAL GmbH**
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany

+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com

EU – Declaration of Conformity

We herewith confirm that the appliance as detailed below complies with the mentioned directives.

Article description: Mini Kompressor aufladbar
Article number: 21083
Type:
Company address: EAL GmbH, Otto-Hausmann-Ring 107, D — 42115 Wuppertal

The sole responsibility for issuing this declaration carries the manufacturer.

governing EU-directives:

1. Electromagnetic Compatibility (EMC) Low Voltage Directive (LVD) 2014/30/EU 2014/35/EU Amtsblatt EU L96/79-106 (29.03.2014) Amtsblatt EU L96/357-374 (29.03.2014)

2. Low Voltage Directive (LVD) 2014/35/EU
   Amtsblatt EU L96/357-374 (29.03.2014)

3. Machinery Directive 2006/42/EG

4. Restriction of the use of certain hazardous substances 2011/65/EC und detegierte Richtlinie (EU) 2015/863

harmonised EN- Standards

The article complies with the standards as mentioned below which are necessary to obtain the CE-symbol:
zu 1. EN 61000-6-3:2007+A1:2011
zu 2. EN 61000-6-1:2007
zu 3. DIN EN ISO 12100:2011-03 EN 60335-1:2012+A11:2014+A13:2017+ A1:2019+A14:2019+A2:2019 EN 1012-1:2010
zu 4. EN ISO 63000

Signature:

EAL GmbH
Otto-Hausmann-Ring 107
D-42115 Wuppertal
Tel.: +49 (0) 202 42 92 83-0
Fax: +49 (0) 202 265 83-160

References

• vertrieb.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>