EUFAB 16452 Induction Charger Reverse Micro USB B User Guide

: October 29, 2023
: EUFAB

Table of Contents

EUFAB 16452 Induction Charger Reverse Micro USB B User Guide
1. Proper use of the device
2. Scope of delivery
3. Specifications
4. Safety precautions
5. Explanation of symbols
6. Operating instructions
7. Maintenance and care
8. Notes regarding environmental protection
9. Contact information
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUFAB 16452 Induction Charger Reverse Micro USB B User Guide

EUFAB 16452 Induction Charger Reverse Micro USB B

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Deutschland

+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160

info@eal-vertrieb.com
www.eal-vertrieb.com

All manuals and user guides at all-guides.com

WARNING

Read the operating instructions through carefully prior to initial use and observe all of the safety notes! Not observing these may lead to personal injury, damage to the device or to your property! Keep the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing the product on, please also include these operating instructions. Please check the package contents to make sure everything is intact and complete!

1. Proper use of the device

The induction receiver is a retrofit component which enables you to charge a smartphone with micro USB B port using an induction charger. The receiver is placed between the protective cover and the back of the device. The receiver cannot be used without the protective cover.

This device is not designed to be used by children or persons with limited mental abilities or without the required specialist knowledge. Keep children away from the device.

The device is not designated for commercial use.

Use according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observance of the safety precautions. Any other use is considered to be contrary to the intended purpose and may lead to material damage or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.

2. Scope of delivery

1 x Receiver for induction charger
1 x Operating instructions

3. Specifications

Dimensions (L x W x H): 85 x 48 x 1.2 [mm]
Weight: 15 g
Length of charging connector: 18mm
Output voltage: 5 V DC
Charging current: 1 A

4. Safety precautions

FIG 1 Safety precautions

FIG 2 Safety precautions

5. Explanation of symbols

Complies with EC directives
Labelled electrical products may not be disposed of in the household waste

6. Operating instructions

Remove your smartphone from its protective cover. Clean the back and the inside of the protective cover to remove dust and dirt. Connect the receiver to the charging connection of your device. Place the receiving antenna on the back of your smartphone. Replace the smartphone in its protective cover. Ensure that the lead and antenna are not bent or otherwise damaged.

Once you have placed your mobile device on the charging pad of an induction charger, charging will start automatically. Position your mobile device with the antenna in the centre of the charging pad to ensure the best connection.

7. Maintenance and care

When used as directed, the voltage converter is maintenance-free.

After considerable use dirt and dust collects between the mobile device, the protective cover and the receiver. This could cause chafe marks and scratches on the device. For this reason clean the back of the device and the inside of the protective cover regularly.

8. Notes regarding environmental protection

Do not dispose of electrical devices with the household waste! Electrical and electronic devices must be collected separately and sent for environmentally friendly recycling. Please contact your community or city administration regarding disposal options for electrical and electronic scrap.