EUFAB 11231ON Frame Holder Instruction Manual
- June 1, 2024
- EUFAB
Table of Contents
EUFAB 11231ON Frame Holder
Specifications:
- For U-bracket diameter: For bicycle frame diameter:
- Length 11230 : approx. 10.5 cm
- Length 11231 : approx. 30 cm
- Weight 11230 : 0.260 kg
- Weight 11231 : 0.340 kg
Product Usage Instructions
Proper Use of the Product
The frame mount is used to secure a bicycle to the U-bracket of a bicycle rack. It is important to note:
- This device should not be used by children or persons with limited mental abilities.
- Avoid using the device for commercial purposes.
- Follow all information in the operating instructions, especially the safety notes.
Scope of Delivery
The package includes the frame holder as specified by the product number.
Safety Precautions
Read the operating instructions carefully before use and ensure to observe all safety instructions provided. Failure to do so may result in personal injury or damage to property.
Operating Instructions
Secure the bicycle using the tension belt provided. Refer to Figure 1 for an overview of how the frame holder should be positioned.
Maintenance and Care
Clean the frame holder with a slightly moist, soft cloth and a mild cleaning agent. Avoid using aggressive cleaning agents, solvents, or petrol. Store the frame holder in a dry place and prevent any liquids from entering the tube of the frame holder.
Notes Regarding Environmental Protection
Dispose of the device through recycling bins or public collection points to contribute to environmental protection. The materials used are recyclable, promoting sustainable waste management practices.
FAQ
- Q: Can children use this frame holder?
- A: No, this product is not designed for use by children or individuals with limited mental abilities.
- Q: Can I use this frame holder for commercial purposes?
- A: No, the frame holder is not designated for commercial use.
- Q: How should I clean the frame holder?
- A: Clean the frame holder with a slightly moist, soft cloth and a mild cleaning agent. Avoid aggressive cleaning agents, solvents, or petrol.
WARNING!
Please read the operating instructions carefully prior to use and observe all
safety instructions!
Not observing such may lead to personal injury, damage to the device or to
your property!
Store the original packaging, the receipt and these instructions so that they
may be consulted at a later date! When passing on the product, also include
these operating instructions.
Check the contents of the package for integrity and completeness prior to use!
PROPER USE OF THE PRODUCT
The frame mount is used to secure a bicycle to the U-bracket of a bicycle rack. This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observance of the safety notes. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damage or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.
SCOPE OF DELIVERY
- 1 x Frame mount
- 1 x Rubber insert ø 25 mm
- 1 x Rubber insert ø30 mm
- 1 x Operating instructions
SPECIFICATIONS
- For U-bracket diameter: 25 mm and 30 mm
- For bicycle frame diameter: 30 – 60 mm
- Length 11230: approx.10.5 cm
- Weight 11230: 0,260 kg
- Length 11231: approx.30 cm
- Weight 11231 : 0,340 kg
SAFETY PRECAUTIONS
- The warning triangle indicates all instructions which are important for safety. Always follow these otherwise you could injure yourself or damage the device.
- Children may not play with the device.
- Cleaning and user maintenance may not be carried out by children without supervision.
- Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
- Only use this product for its designated purpose!
- Do not manipulate or disassemble the frame mount!
- For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
- If the frame holder is visibly damaged, safe use is no longer possible. The frame holder may thus no longer be used.
- Observe the specifications and safety precautions in the instructions for your bicycle rack!
OPERATING INSTRUCTIONS
- Knob screw
- Pipe clamp
- Rubber inserts Ø 25
- Rubber inserts Ø 30
- Frame holder with tension belt
Open the pipe clamp (2) of the frame holder by turning the knob screw (1) out completely. Depending on the diameter of the U bar of your bicycle carrier, select the suitable rubber insert (3 or 4) and place it around the U – bar pipe. Then place the pipe clamp over the insert and press the pipe clamp together. Insert the knob screw through both the boreholes of the pipe clamp. Screw the frame holder (5) onto the thread of the knob screw. The bicycle frames are secured using the tension belt. As the last step, tighten the knob screw.
CAUTION
Before riding, secure the bicycle as per the vehicle carrier manual (tension belts, safety belt, etc.)
MAINTENANCE AND CARE
Clean the frame holder using a slightly moist, soft cloth and a mild cleaning
agent.
Do not use aggressive cleaning agents, solvents or petrol. Ensure that no
cleaning agents or liquids enter the tube of the frame holder. Store the frame
holder in a dry place.
NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of this device via the recycling bin or the public/municipal
collection points.
The materials are recyclable. You make an important contribution to protecting
our environment by recycling, material utilization or other forms of reusing
waste equipment!
CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107 42115 Wuppertal, Germany
- +49 (0)202 42 92 83 0
- +49 (0) 202 42 92 83 – 160
- info@eal-vertrieb.com
- www.eal-vertrieb.com