Whirlpool W0I D741A S Fully Built In Dishwasher User Guide

Quick Guide

W0I D741A S Fully Built In Dishwasher

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance, please register your appliance on: www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instruction
PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO HAVE MORE DETAILED INFORMATION
PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO HAVE MORE DETAILED INFORMATION

http://docs.whirlpool.eu

CONTROL PANEL

1. ON-OFF/Reset button with indicator light
2. Program selection button
3. Salt refill indicator light
4. Rinse Aid refill indicator light
5. Program number and delay time indicator
6. Tablet indicator light
7. Display
8. Multizone indicator lights
9. Multizone button
10. Delay button
11. urbo button with indicator light
12. Power Clean® button with indicator light
13. START/Pause button with indicator light / Tab

FIRST TIME USE

FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must befilled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Only the first time you do this: fill the salt reservoir with water.
3. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
   Make sure the cap is screwed on tightly, so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the RINSE AID REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the appliance tub. FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the detergent into the dry dispenser D only. Place the amount of detergent for pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button, because it adjusts the program so that the best washing and drying results are always achieved.
Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance.

WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently preventing scale buildup on heater, contributing also to better cleaning efficiency.
This system regenerates itself with salt, therefore it is required to refill salt container when empty. Frequency of regeneration depends on water hardness level setting – regeneration takes place once per 6 Eco cycles with water hardness level set to 3. Regeneration process starts in final rinse and finishes in drying phase, before cycle ends.

• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.

PROGRAMS TABLE

Program| Programs description| Drying phase| Natu – ralDry| Available options
*)| Duration of wash
program (h:min)
**)| Water consumption(litres/cycle)| Energy consumption
(kWh/cycle)
---|---|---|---|---|---|---|---
1.| Eco 50°- Program is suitable to clean normally soiled tableware, that for this use, it is the most efficient programme in terms of its combined energy and water consumption, and that it is used to
assess compliance with the EU Ecodesign legislation.| | | | 3:10| 9.5| 0.75
2. | 6th Sense® 50°- 60°- For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accordingly.| | | | 1:25 – 3:00| 7.0 – 14.0| 0.90 – 1.40
3. | Intensive 65° – Program recommended for heavily soiled crockery, especially suitable for pans and saucepans.| | | | 2:50| 16.0| 1.60
4. | Mixed 60° – Mixed soil. For normally soiled dishes with dried food residues.| | | | 2:30| 16.0| 1.30
5.| Fast Wash&Dry 50° – Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.| | | | 1:25| 11.5| 1.10
6.| Crystals 45° – Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.| | | | 1:40| 11.5| 1.20
7.| Rapid 30’ 50° – Program to be used for half load of lightly-soiled dishes with no dried food residues. Without drying.| –| –| | 0:30| 9.0| 0.50
8. | Silent 50° – Suitable for night-time operation of the appliance. With the lowest noise.| | | | 3:30| 15.0| 1.15
9.| Sanitizing 65° – Normally or heavily soiled crockery, with additional antibacterial
wash. Can be used to perform maintenance
of the dishwasher.| | –| | 1:40| 10.0| 1.30
10.| Pre-Wash – Use to refresh crockery planned to be washed later.
No detergent to be used with this program.| –| –| | 0:12| 4.5| 0.01
11.| Self- Clean 65° – Program to be used to perform maintenance of the dishwasher, to be carried out only when the dishwasher is EMPTY using specific detergents designed
for dishwasher maintenance.| –| –| | 0:50| 8.0| 0.85

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com Pre- treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor calibration.
The sensor calibrationcan increase program duration up to 20 min.

OPTIONS AND FUNCTIONS

Please scan the QR code on your product in order to have more detailed information.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.

MULTI Zone MULTIZONE – If there are not many dishes to be washed, a half loading may be used in order to save water, electricity and detergent.
By default the appliance washes dishes in all racks.
DELAY – The start time of the program may be delayed for a period otime between 1 and 12 hours.
The DELAY function cannot be set once a wash cycle has been started.
TURBO – This option can be used to reduce the duration of the main programs while maintaining the same washing and drying performance levels.
POWER CLEAN® – Thanks to the additional power jets this option provides a more intensive and powerful wash in the lower rack, in the specific area. This option is recommended for washing pots and casseroles.
TABLET (Tab)- If you use powder or liquid detergent, this option should be off.
OPERATION INDICATOR – A LED light projected on the floor indicates that the dishwasher is working.
One of the following operating modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds, stays off during the cycle and flashes at the end of the cycle.
c) The light stays on during the cycle and flashes at the end of the cycle (default mode).
NaturalDry is a convection drying system which automatically opens the door during/after drying phase to ensure exceptional drying performance every day. Door opens at the temperature that is safe to your kitchen furniture, thus door will not be opened when the option of TURBO is on.

LOADING THE RACKS

CAPACITY: 14 standard place-settings

(loading example for the cutlery rack) The third rack was designed to ho- use the cutlery. Arrange the cutlery as shown in the figure. (loading example for the upper rack) Load delicate and light dishes: glasses, cups, saucers, low salad bowls.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION LOWER RACK

For pots, lids, plates,salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tipup supports which can be used in a vertical position when arranging plates or in a horizontal position (lower) to load pans and salad bowls easily. POWER CLEAN®
Power Clean® uses the special water jets in the rear of cavity to wash more intensively the high dirty items. The lower rack has a Space Zone, a special pull-out support in the rear of the rack that can be used to support frying pans or baking pans in upright position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean® component please activate the POWER CLEAN® on the panel.

CLEANING AND MAINTENANCE

More information in the Daily Reference Guide on website.
CLEANING THE FILTER ASSEMBLY In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

CLEANING THE SPRAY ARMS To remove the upper spray arm, turn the plastic locking ring in a clockwise direction.
The lower spray arm may  be removed by pulling it upwards.

TROUBLESHOOTING

Please scan the QR code on your product in order to have more detailed information.
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.

The dishwasher does not fill the water.
Display shows: H, 6 and On/Off LED is blinking rapidly| No water in the water supply or the tap is closed.| Make sure there is water in the water supply or the tap running.
The inlet hose is bent.| Make sure the inlet hose is not bent (see INSTALLATION) repro-gram the dishwasher and reboot.
The sieve in the water inlet hose is clogged; it is necessary to clean it| After having carried out the verification and cleaning, turn off and turn on the dishwasher and restart a new program.
Dishwasher finishes the cycle prematurely.
Display shows: 15 and On/Off LED is blinking rapidly| Drain hose positioned too low or siphoning into home sewage system.| Check if end of drain hose is placed at correct height (see INSTAL-LATION).Check for siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply.| Check water supply for leaks or other issues letting air inside.

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales

Service, please state the codes provided on your product’s identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.

References

• Whirlpool Docs
• Register | Whirlpool Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>