logitech SCRIBE User Guide
- June 6, 2024
- Logitech
Table of Contents
- SCRIBE
- Setup Guide
- WHAT’S IN THE BOX
- CAMERA I/O
- CONNECTIONS OVERVIEW
- RECOMMENDED CAMERA PLACEMENT HEIGHT
- STEP 1: ATTACH THE CAMERA MOUNTING BRACKET
- STEP 2: PLUG IN THE CAT5E CABLE AND CHOOSE A ROUTING OPTION
- STEP 3: ATTACH THE CAMERA ONTO THE CAMERA MOUNTING BRACKET
- STEP 4: CONNECT THE CAT5E CABLE TO THE POWER INJECTOR
- STEP 5: CONNECT THE POWER INJECTOR TO A POWER OUTLET
- STEP 6: CONNECT SECOND CAT5E CABLE TO THE POWER INJECTOR
- STEP 7: CONNECT THE OTHER END TO THE DONGLE TRANSCEIVER.
- RECOMMENDED BUTTON PLACEMENT HEIGHT
- STEP 8: INSTALL SHARE BUTTON
- STEP 9: START WHITEBOARD SHARING FROM MEETING ROOM TOUCH CONTROLLER
- STEP 10: CONFIRM CALIBRATION TO FINISH SETUP
- STEP 11: READY TO GO!
- www.logitech.com/support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SCRIBE
Setup Guide
WHAT’S IN THE BOX
Camera Unit
Camera Mounting Bracket
Mounting Template
Share Button
Power Injector
Dongle Transceiver
(2x)
CAT5e Cables
(2x)
Cable Clips(4x)
Boundary Stickers
IEC C8 Power Cord Adapter
(4x)
Molly Bolts(4x)
Wood Screws
CAMERA I/O
CONNECTIONS OVERVIEW
RECOMMENDED CAMERA PLACEMENT HEIGHT
If needed, apply boundary stickers to mark the max capture area.
STEP 1: ATTACH THE CAMERA MOUNTING BRACKET
Mark screw hole locations using the mounting template.
1
2
STEP 2: PLUG IN THE CAT5E CABLE AND CHOOSE A ROUTING OPTION
STEP 3: ATTACH THE CAMERA ONTO THE CAMERA MOUNTING BRACKET
STEP 4: CONNECT THE CAT5E CABLE TO THE POWER INJECTOR
Insert cable connected to camera to “OUT”.
STEP 5: CONNECT THE POWER INJECTOR TO A POWER OUTLET
STEP 6: CONNECT SECOND CAT5E CABLE TO THE POWER INJECTOR
Insert cable connected to camera to “IN”.
STEP 7: CONNECT THE OTHER END TO THE DONGLE TRANSCEIVER.
PLUG THE DONGLE TRANSCEIVER INTO THE MEETING ROOM PC.
RECOMMENDED BUTTON PLACEMENT HEIGHT
Install the button 30”- 48” from the floor.
STEP 8: INSTALL SHARE BUTTON
Remove the battery pull tabs only after you have mounted Share Button to the wall.
1 2 3
STEP 9: START WHITEBOARD SHARING FROM MEETING ROOM TOUCH CONTROLLER
STEP 10: CONFIRM CALIBRATION TO FINISH SETUP
If calibration is correct, press the Share button to confirm. If calibration is incorrect, download Logitech Sync to adjust boundaries. logitech.com/sync.
STEP 11: READY TO GO!
Press Share Button to easily start/stop whiteboard sharing into meetings.
www.logitech.com/support
© 2021 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
620-010125 003
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>