jONSBO N1 5 Hard Disk Location NAS Aluminum Case Instruction Manual
- June 4, 2024
- JONSBO
Table of Contents
N1
Manual
Specifications
| Size | 170mm (W) * 354mm (D) « 217mm (H) |
|---|---|
| Drive bays | 2.5″SSD1/3.5″HDD5 |
| Front I/O | USB3.0 1+ Type-C « 1 Combined, Audio 1 Headphonet+mic Combined |
| PSU | SFX/SFX-L (<150mm L) |
| Cooler | <70mm |
| CPU | <185mm L Low profile |
| PCI Slot | 1 |
| Fan (Pre-installed | 140mm*1 Front |
| Weight | Net: 3.8 kg |
Accessories
A. Screws/PSU5+MB5
| B. Washer
| C. Screw SSD
---|---|---
D. Rubber grommet
| E. Scrows
| F. HDD Handle
G. Aluminum feet
| H. Cable ties
|
Connectors
USB 3.0 Connection
Power Button Connection
HD Audio Connetion
Power LED Connection
Product exploded view
-
Remove cover
Release rear panel screws 2, Hold the handle to pull out chassis out -
Install Motherboard
Insert the rear IO bracket and motherboard as shown in degrame, secure with 4 screws -
GPU/add-on card installation
Remove PCI bracket 2, Install the card to motherboard, secure with screw -
PSU Installation
Insert the PSU to the case, and secure with screws -
3.5″ HDD Installation
1. Pre-install the rubber grommets and HDD handle to HDD, secure with screws
2. Insert the HDD to the correspond slot -
2.5″ SSD Installation
Insert the SSD to corresponding bracket, screw-fix it with one side -
Cover installation
1. After finishing hardware installation, insert the chassis into the cover
2. Secure the rear panel with screws -
Vertical case stand installation
Install the vertical case stand to the rear panel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>