CONNECTS2 CTSHY020.2 Steering Wheel Control Interface Instruction Manual

CONNECTS2 CTSHY020.2 Steering Wheel Control Interface

Product Information

Specifications

• Model: CTSHY020.2
• Product Name: Hyundai Steering Wheel Control Interface
• Vehicle Application: Hyundai Elantra 2013 – 2015, Hyundai i30 2012 – 2017, Hyundai iX35 2013 – 2015
• Compatibility: Non Amplified Vehicles with OEM Navigation

About This Product
Analogue Steering Wheel Control Interface for non-amplified Hyundai vehicles with OEM navigation head unit. Designed for easy Plug & Play installation with a standard ISO connector. Features a built-in reverse trigger for camera fitting or retention. Allows for hands-free call answering with phone button functionality.

Wiring Colour Codes

• Purple, Purple/Black – Right Rear Speaker +, Right Rear Speaker –
• Green, Green/Black – Left Rear Speaker +, Left Rear Speaker –
• Grey, Grey/Black – Right Front Speaker +, Right Front Speaker –
• White, White/Black – Left Front Speaker +, Left Front Speaker –
• Yellow – Permanent 12V
• Black – Ground
• Red – Ignition 12V
• Green – Park Brake
• Pink – Speed Pulse

Prior to Installation
Read the manual before installation. Technical knowledge required. Install in a dry, heat-free location. Use correct tools to avoid damage. Connects2 not liable for improper installation.

Technical Support
Contact Connects2’s technical support team for assistance. Fill in a ticket at support.connects2.com with detailed information.

Product Usage Instructions

Fitting Guide

1. Remove and disconnect the original head unit.
2. Connect the 12-way molex connector of the head unit patch lead to the interface.
3. Connect the opposite end of the head unit patch lead to the head unit’s steering wheel control input on the back of the aftermarket head unit.
4. Connect the 14-way molex connector to the interface.
5. Connect the male power/speaker ISO harness to the female power/speaker ISO harness from the aftermarket head unit.
6. Connect the female vehicle-specific connectors on the harness to the male vehicle connector from the vehicle.
7. Test head unit for correct operation.

Steering Wheel Control Functionality:

FAQ

Q: Can this interface work with amplified Hyundai vehicles?
A: No, this interface is designed for non-amplified Hyundai vehicles with OEM navigation.

CTSHY020.2
Hyundai Steering Wheel Control Interface

Vehicle Application

• Hyundai Elantra 2013 – 2015
• Hyundai i30 2012 – 2017
• Hyundai iX35 2013 – 2015
• Non Amplified Vehicles with OEM Navigation

Key Features

• Retains Steering Wheel Controls
• Retains OEM Phone Buttons
• Retains original reverse trigger wire

connects2.com
The information provided in this document is subject to change without notice due to changes and/or improvements to the product/s.

ABOUT THIS PRODUCT

CTSHY020.2
Analogue Steering Wheel Control Interface for non-amplified Hyundai vehicles with OEM navigation head unit. Designed to be hassle-free with its easy Plug & Play Hyundai connector to standard ISO. Features a built-in reverse trigger for camera fitting or retention. Enjoy the convenience of answering hands-free calls with phone button functionality.

WIRING COLOUR CODES

• Purple Right Rear Speaker +
• Purple/Black Right Rear Speaker –
• Green Left Rear Speaker +
• Green/Black Left Rear Speaker –
• Grey Right Front Speaker +
• Grey/Black Right Front Speaker –
• White Left Front Speaker +
• White/Black Left Front Speaker –
• Yellow Permanent 12V
• Black Ground
• Red Ignition 12V
• Green Park Brake
• Pink Speed Pulse

PRIOR TO INSTALLATION

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Please ensure that the correct tools are using during the installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product.

TECHNICAL SUPPORT

Connects2 want to provide a fast and suitable resolution to any problems encountered during installation of this product. To get in touch with our dedicated technical support team, please fill in a ticket at support.connects2.com and provide as much information as possible.

FITTING GUIDE

1. Remove and disconnect the original head unit.

2. Connect the 12 way molex connector of the head unit patch lead (supplied separately) to the interface.

3. Connect the opposite end of head unit patch lead to the head unit steering wheel control input on the back of the aftermarket head unit.
   NB : This may be a 3.5mm jack plug or a wire input depending upon the head unit brand being fitted. Please see the head unit installation manual for further information on where to connect.
   Important: This step must be completed before connecting power to the interface. Failure to so do may result in no steering wheel control function.

4. Connect the 14 way molex connector to the interface

5. Connect the male power/speaker ISO harness to the female power/speaker ISO har-ness from the aftermarket head unit. For aftermarket head units without an ISO connector, please refer to “Wiring Colour Codes” on Pg. 2.

6. Connect the female vehicle specific connectors on the harness to the male vehicle connector from the vehicle. Test head unit for correct operation.

STEERING WHEEL CONTROL FUNCTIONALITY

Original Button

• Volume +
• Volume –
• Up Arrow
• Down Arrow
• MODE
• Speech
• Pick Up
• Hang Up

Function

• Volume +
• Volume –
• Track +
• Track –
• Source
• Mute
• Pick Up
• Hang Up

References

• Connects2 - Vehicle Integration
• Connects2

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>