MOTHER WELL MWL-118 Solo Luggage Rack Instruction Manual
- June 1, 2024
- MOTHER WELL
Table of Contents
MOTHER WELL MWL-118 Solo Luggage Rack
Specifications
- Product Name: Motherwell Products Solo Luggage Rack
- Model: MWL-118
- Document Number: M118-K15
Product Information:
The Motherwell Products Solo Luggage Rack is designed to provide a secure and
convenient way to carry cargo on your motorcycle. It has a maximum weight
capacity of 10 lbs and features a sturdy construction for durability.
Tools Required:
-
2 Phillips Screw Driver
- Kit #15
Use and Care
When cleaning the rack, use mild soap and water. Avoid abrasive chemicals or cleaners that may damage the finish. Care for the rack as you would care for your motorcycle accessories.
Mounting Procedure:
- Remove the Pillion seat.
- Install foam tabs on the back and front of the rack.
- Place the rack on the fender mounting points. The forward mount should sit on top of the driver’s seat.
- Install the stock screw into the rear pick-up point on the rack without tightening it.
- For the front mount, place the nylon washer on the rack with the stainless steel washer on top.
- Insert the supplied Phillips screw loosely and proceed to tighten both screws down.
Contact Information
If you have any questions or need assistance, you can contact Motherwell
Products USA, Inc at Toll-Free
877-703-7118 or visit their website at
www.motherwellproducts.com.
Great Rides Start With Motherwell
Motherwell Products USA, Inc
7074 Portal Way #140
Ferndale, WA 98248
FAQ :
Q: Can I exceed the maximum weight capacity of 10 lbs?
A: No, it is important to never carry more than 10 lbs on the rack to ensure proper handling and safety while riding.
INSTALLATION INSTRUCTIONS
MWL-118
FITMENT
- 7″ Solo Luggage Rack For Softail Low Rider 2018-UP
- MAX CAPACITY: 10 lbs
- MATERIAL: 3/8” Solid steel & ½” tubing outside
- TECHNICAL SPECS: May require a fender/seat mounting kit, part # MWL-2000-16
- WELCOME: These instructions describe the procedure for properly installing the Motherwell Products Solo Luggage Rack.
- ATTENTION INSTALLER (if other than owner):
- Please forward this instruction sheet to the purchaser of this product as it contains valuable information necessary to the end user.
- CAUTION: Start screw carefully to avoid cross threading.
USE AND CARE
Wash your accessories with the same care you use when washing your motorcycle.
Use mild soap and water. DO NOT use abrasive chemicals, cleaners.
WARNING: Never carry more than 10 lbs. on rack, and always secure cargo
properly. Failure to do so can affect handling. Make sure neither cargo straps
are loose and come in contact with moving parts, i.e., wheels, brakes, etc…
TOOLS REQUIRED
-
2 Phillips Screw Driver
- Kit #15
- PARTS INCLUDED: MWL Part # Luggage Rack MWL-118
- 2 Phillips ¾” Pan Head Screw FAS-009 2 ¼ Bond Seal S/S FAS-057
- 1 Foam Tab FOAM-AFT
- 2 Round Foam Round Foam
MOUNTING PROCEDURE
- Remove Pillion seat.
- Install foam tabs on back and front of the rack.
- Place rack on fender mounting points. (The forward mount sits on top of the driver’s seat)
- Install the stock screw into rear pick up point on the rack. (DO NOT TIGHTEN)
- For the front mount, place the nylon washer on the rack with the stainless steel washer on top.
- From there insert the supplied Phillips screw loosely.
- Proceed to tighten both screws down.
Great Rides Start With Motherwell Motherwell Products USA, Inc 7074 Portal Way
140
Ferndale, WA 98248
Toll Free 877-703-7118
www.motherwellproducts.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>