BEGA 24 041 Ceiling and Wall Luminaire Instruction Manual

: June 13, 2024
: BEGA

Table of Contents

BEGA 24 041 Ceiling and Wall Luminaire
Product Information
Product Usage Instructions
DIMENSIONS
Instructions for use
Product Description
Installation
Cleaning Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 24 041 Ceiling and Wall Luminaire

Product Information

This is a ceiling and wall luminaire with a high protection class (IP65). It is suitable for both interior and exterior lighting applications. The luminaire is made of aluminium alloy and features opal glass and a silicone gasket. It has a distance of 283mm between the ceiling or wall and the luminaire. The luminaire is equipped with a plug connection and a LED power supply unit that operates at 220-240 V AC and 176-264 V DC. It is alsoDALI- controllable. The luminaire has basic insulation between the mains and control cables to protect temperature-sensitive components. It has a safety class I and impact strength of IK04. The protection class is IP65, making it dust- tight and protected against water jets. The product contains light sources of energy efficiency classes C.

Product Usage Instructions

Ensure that the installation and operation of the luminaire comply with national safety regulations.
Installation and commissioning should only be carried out by a qualified electrician.
Do not modify the luminaire without proper authorization, as it may void the warranty and cause damage.
For additional protection against transients and overvoltage, it is recommended to use separate overvoltage protection components. Visit www.bega.com for more information.
When connecting the luminaire, refer to the module designation (24 041 K3) for the correct wattage and color temperature.
The luminaire has a color rendering index (CRI) of over 80, providing good color reproduction.
The module luminous flux is 4935 lm, and the luminaire luminous flux is 4020 lm, resulting in a luminaire luminous efficiency of 130.5 lm/W.
Ensure that the ambient temperature is within the specified range for proper operation of the luminaire.

Ceiling and wall luminaire

DIMENSIONS

BEGA-24-041-Ceiling-and-Wall-Luminaire-product-
fig-1

Instructions for use

Application
Unshielded ceiling and wall luminaire with high protection class. For a variety of interior and exterior lighting applications.

Product Description

Luminaire made of aluminium alloy and stainless steel
BEGA Unidure® coating technology
Opal glass
Silicone gasket
2 mounting holes ø 5.5 mm
Distance apart 283 mm
2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@ Connecting terminal 2.5@ with plug connection
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK04
Protection against mechanical
impacts < 0.5 joule
Safety mark
Conformity mark
Weight: 4.6 kg
This product contains light sources of energy efficiency classes C

This product contains light sources of energy efficiency classes C

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.

You can find them on our website at www.bega.com.

Lamp
Module connected wattage: 27.6 W
Luminaire connected wattage: 30.8 W
Rated temperature: ta = 25 °C
Ambient temperature: ta max = 45 °C
24 041 K3
Module designation: LED-0832/830
Color temperature: 3000 K
Color rendering index: CRI > 80
Module luminous flux: 4935 lm
Luminaire luminous flux: 4020 lm
Luminaire luminous efficiency : 130,5 lm / W
24 041 K4
Module designation: LED-0832/840
Color temperature: 4000 K
Color rendering index: CRI > 80
Module luminous flux: 5010 lm
Luminaire luminous flux : 4081 lm
Luminaire luminous efficiency : 132,5 lm / W

Installation

Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Make the earth conductor connection and the electrical connection.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light output.
In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
Push plug into coupler as far as it will go. Make sure that gasket is positioned correctly. Place the opal glass with LED unit onto the luminaire base in such a way that both yellow arrow markers align to each other and screw the glass clockwise into the base up to the stop.

Cleaning Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Spares