Seeed Wio Helium Monitor Instructions
- June 3, 2024
- Seeed
Table of Contents
Wio Helium Monitor
Instructions
Wio Helium Monitor
Installation:
- Update the Wireless Core Firmware on the WioTerminal following the Seeed documentation : https://wiki.seeedstudio.com/Wio-Terminal-Network-Overview/
- Drag & Drop the Wio Helium Monitor firmware on the Wio Terminal. The firmware can be downloaded here : https://github.com/disk91/WioHeliumMonitor/blob/master/bin/WioHeliumMonitor.ino.uf2
Verification
-
After the firmware download or power it on
-
The Wio Terminal will boot and display the following screen (the screen is a bit different now : there is a QR code displayed on it).
-
Check the available WiFi networks and make sure you see WioHeliumMoninetwork listed. Do not connect or anything else, this verification is good enough.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>