Weller HAP-1 Set Hot Air Iron Instruction Manual

: May 15, 2024
: Weller

Table of Contents

Thank you
Caution
Description
Placing in Operation
Potential balance
Soldering Notes
Items Supplied
Technical Data
Accessories
Product Registration
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Weller HAP-1 Set Hot Air Iron

Weller HAP-1 Set Hot Air Iron

Thank you

Always place the soldering tool in the safety rest while not in use.

Thank you for buying the Weller HAP 1. The apparatus has been subjected in the production process to the most stringent quality requirements, which will ensure faultless apparatus operation.

Caution

Please read these Operating Instructions and the Safety Information carefully prior to initial operation of the apparatus. Failure to observe the safety regulations results in a risk to life and limb.

The manufacturer shall not be liable for damage or injury resulting from use that deviates from these Operating Instructions and from unauthorised modifications.

Safety Information

Always place the soldering iron in the original holder.
Remove all inflammable objects from the proximity of the hot soldering tool.
Use suitable protective clothing. Risk of burns from liquid solder.
Never leave the hot soldering iron unsupervised. Do not point the hot air soldering tool at persons or flammable objects
Never work on voltage-carrying parts.
In case of usage of nitrogen, ensure adequate ventilation (Only on units with external compressed air supply)

Description

100 W hot air soldering tool with integrated finger switch, suitable for soldering and desoldering surface mounted components. A wide range of nozzles makes the tool of universal application.

The air flow is controlled using the finger switch integrated in the handle. The hot air flowing out of the soldering tool is free of static charges. Hose and handle are of anti-static design. The temperature-regulated hot air can be set to between 50°C and 550°C using the control unit employed.

Placing in Operation

Ensure that the control unit is switched off. Place the hot air pencil in the safety stand. Plug the electrical connector into the 7-pole connecting socket on the control unit and lock. Slide the hose onto the „AIR“ nipple on the control unit. Switch on unit and set temperature and air flow rate.

Potential balance

The hot air soldering tool is equipped with an equipotential bonding wire that can be configured as per the operating instructions for the control unit used.

Soldering Notes

The thread depth is max. 5 mm (0.2”). A longer thread will cause irreparable damage to the heater element.

Replacement hot air tools are supplied adjusted and can be connected without further adjustment.

To check the temperature of the hot air, it is recommended to use a special measuring nozzle (T0058727808) through which a sheathed thermocouple ø 0.5mm can be connected.

The operating instructions for the control unit used are also applicable in addition to these operating instructions.

Items Supplied

Hot Gas Pencil 24 V, 100 W T005 27 115 99
WDH 30 Safety rest T005 15 152 99
R04 Nozzle 1,2 mm ø T005 87 278 21
Operating Instructions

Subject to technical change without notice!

Technical Data

Heater rating: 100 W
Heater voltage: 24 V AC
Max. air flow rate: 10 l / min.
Temperature range: 50°C – 550°C
Precision: +/- 30 °C

Accessories

| Order-no.| Model| Description| Width A| Thickness B
---|---|---|---|---|---
Accessories | T005 87 277 74| F02| Flat nozzle| 8,0 mm| 1,5 mm
| T005 87 277 73| F04| Flat nozzle| 10,5 mm| 1,5 mm
| T005 87 277 72| F06| Flat nozzle| 12,0 mm| 1,5 mm
| T005 87 278 23| R02| Round nozzle| Ø 0,8 mm|
| T005 87 278 21| R04| Round nozzle| Ø 1,2 mm|
| T005 87 278 22| R06| Round nozzle| Ø 3,0 mm|
Accessories | T005 87 277 87| R10| Round nozzle long| Ø 2,0 mm|
| T005 87 277 86| R08| Round nozzle long bent| Ø 2,0 mm|
| T005 87 277 76| FD2| Dual nozzle| Ø 1,5 mm| 8 mm
| T005 87 277 75| FD4| Dual nozzle| Ø 1,5 mm| 10 mm

Two sides heated (Type D, width X = heated side)

| Order-no.| Model| Description| Width X| Thickness Y
---|---|---|---|---|---
Accessories | T005 87 277 79| D04| Hot air nozzle, two sides heated, with hot plate| 10,5 mm| 10,5 mm
| T005 87 277 82| D06| Hot air nozzle, two sides heated, with hot plate| 13,0 mm| 10,0 mm
| T005 87 277 81| D08| Hot air nozzle, two sides heated, with hot plate| 15,0 mm| 10,0 mm
| T005 87 277 84| D10| Hot air nozzle, two sides heated, with hot plate| 18,0 mm| 10,0 mm

Hot Air Nozzles for HAP 1 Four sides heated (Type Q)

| Order-no.| Model| Description| Width X| Thickness Y
---|---|---|---|---|---
| T005 87 277 77| Q02| Hot air nozzle, four sides heated, with hot plate| 6,0 mm| 6,5 mm
| T005 87 277 78| Q04| Hot air nozzle, four sides heated, with hot plate| 6,0 mm| 9,0 mm
| T005 87 277 80| Q06| Hot air nozzle, four sides heated, with hot plate| 15,0 mm| 10,0 mm
| T005 87 277 83| Q08| Hot air nozzle, four sides heated, with hot plate| 12,5 mm| 15,0 mm
| T005 87 277 85| Q10| Hot air nozzle, four sides heated, with hot plate| 18,0 mm| 18,0 mm
| T005 87 278 08| R01| Measuring nozzle for thermo element Ø| | 0,5 mm