Coke T12 Wireless Bluetooth Earphones User Manual

Coke T12 Wireless Bluetooth Earphones

Product Information

Specifications

• Product Name: Wireless Bluetooth Earphones
• Connectivity: Bluetooth
• Battery Life: Up to 8 hours
• Charging Time: 2 hours
• Compatibility: Works with most Bluetooth-enabled devices
• Color Options: Black, White, Red

Product Usage Instructions

• Charging
  To charge the earphones, connect the provided USB cable to the charging port on the earphones and a power source. The LED indicator will show red while charging and turn blue when fully charged.

• Pairing
  To pair the earphones with your device, turn on Bluetooth on your device and select the earphones from the list of available devices. Once paired, you will hear a confirmation sound.

• Contr ols
  The earphones have built-in controls for managing calls and music playback. Refer to the user manual for specific control functions.

• Fit and Comfort
  Choose the ear tips that provide the best fit for your ears to ensure comfort and optimal sound quality. Adjust the ear hook if needed for a secure fit during activities.

• Maintenance

• Keep the earphones clean by wiping them with a soft, dry cloth. Avoid exposing them to moisture or extreme temperatures to prolong their lifespan.

FAQ

• Q: How do I reset the earphones?
  A: To reset the earphones, turn them off, then press and hold the power button for 10 seconds until you hear a reset sound.

• Q: Can I use the earphones while exercising?
  A: Yes, the earphones are designed to be sweat-resistant and secure during physical activities.

Wireless Bluetooth earphones

• MODEL: Coke T12
• PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY

PARAMETERS

PRODUCT STRUCTURE

USAGE

CAUTIONS

1.  Reasonable control of the volume and time of usage is required hearing damage.
2. For your safety, do not use in potentially hazardous condition.
3. Do not listen to music, call up or answer the phone while driving danger caused by distraction.
4. Keep out of reach of children to avoid danger caused by improper
5. Do not throw to avoid damage caused by dropping.
6. Do not store it under 0°C or above 40°C to avoid shortening the life earphones and battery.
7. Do not modify, disassemble and repair the product.
8. Irreplaceable battery. It should be disposed of according to local regulations or be recycled by professional institute. Do not throw awe it into fire. 9. When not in use for a long time, charge the earphones once every 3

TROUBLESHOOTING

1. Wireless earphones fail to be paired with the phone.
   Solution: Check if the earphones are in pairing mode, and whether the phone has BT function on. Check the list on your phone, remove earphones from th list, follow the instructions of user manual to pair the earphones with you phone again.

2. Cannot turn on the wireless earphones.
   Solution: Check the battery to see if it is low.

3. Can the battery of the wireless earphones be replaced?
   Answer: No. The lithium polymer battery in the earphones is irreplaceable.

4. The wireless earphones got disconnected with the phone within meters.
   Solution: BT is wireless so that it is very sensitive to objects between the earphones and the connected device. Check if there are any metal or the objects that may affect the connection within the effective distance.

5.  Cannot hear audio playing when the earphones are connected to the computer or phone.
   Solution: Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer.

6. Can I operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
   Answer: Some apps may not support being operated through the earphones dus to their cattinmel

ACCESSORIES

Device × 1. User Manual x 1. USB-C Charaina Ca

FCC Warning:
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for ar uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Warning : This device complies with Industry Canada license-exempt RSS standard(s)
Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may

 www.quefairedemesdechets.fr

FCC Caution : This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>