Weller WTHA 1 900W Hot Air Station Instruction Manual
- October 30, 2023
- Weller
Table of Contents
Weller WTHA 1 900W Hot Air Station
Product Information
The WTHA 1 is a product by Weller Tools that is designed to provide temperature control for industrial and electronic applications. It features a standby mode that allows the device to maintain a consistent temperature when not in use. It also has an LCD display for easy monitoring of the device’s settings. The device has a lock function that prevents unauthorized adjustments to the temperature settings.
Product Usage Instructions
- Ensure that the device is plugged in and turned on using the OFF/ON switch.
- Use the + and – buttons to adjust the temperature settings as needed.
- The device has a standby mode that can be activated by pressing the MENU button for 3 seconds. Use the + and – buttons to adjust the standby temperature settings.
- To activate the lock function, press and hold the TNR button for 3 seconds. To unlock, repeat the process.
- The device also has a hot air button that can be used to provide a blast of hot air when needed.
Translation of the original instructions
UNPACKING
INSTRUCTION
CONNECTING
BUTTON
Standby Temperature
Standby Time
OFF time
Process window
Lock function
Offset
Profile
temperature units
Hot air button
LCD background brightness
Footswitch / RS232 port
DIAGRAM
WTHA 1
Product Registration
Produkt-Registrierung
www.weller-tools.com/registration
GERMANY
Weller Tools GmbH
Carl-Benz-Straße 2 74354 Besigheim
Tel: +49 (0)7143 580-0 Fax: +49 (0)7143 580-108
USA
Apex Tool Group, LLC.
Weller Professional Tools Division 1000 Lufkin Road
Apex, NC 27539
+1 919-362-8381
info@weller-tools.com
www.weller-tools.com
© 2022, Apex Tool Group, LLC.
Weller® is a registered Trademark and registered Design of Apex Tool Group,
LLC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>