verizon FIZVR7614001J Mounting Bracket User Manual
- June 6, 2024
- Verizon
Table of Contents
verizon FIZVR7614001J Mounting Bracket User Manual
PACKAGE CONTENTS
Your package contains
- Mounting Bracket
- Wall screws (2)
- Wall anchors (2)
MOUNTING THE Verizon Router TO A WALL
For optimum performance, the Verizon Router is designed to stand in a vertical
upright position. Verizon does not recommend wall mounting the Verizon Router.
However, if you wish to mount your
Verizon Router, you can purchase a wall mount bracket from the Verizon
Accessories Store at verizon.com/home/accessories/networking-
wifi
To mount your Verizon Router to a wall:
-
Select a mounting spot near a power outlet and the Ethernet port of the device that provides internet on your premises.
-
Mark screw hole positions on the wall. Drill holes for the wall anchors using a 1/4 inch (6.35 mm) drill bit.
-
Insert the wall anchors in the drilled holes and hammer until they are flush with the wall.
-
Place the screws into the small holes of the bracket and tighten the screws into your wall for securing the wall mount bracket.
-
Align the mounting hole located on the bottom of the router to the screw of the wall mount bracket.
-
Rotate and align the router to the preferred position. While using the hole in the mounting bracket, connect the Ethernet cable providing internet to the router’s WAN port and other cables as needed. Tighten the bracket screw to lock the device in place.
-
To fasten the attached cables of the router, manage the cables, then tighten the Velcro® strap with buckle.
General Specifications
- Model Number: FIZVR7614001J
- Bracket: Size: 3.97” wide x 6.86” high x 6.6” deep
- Weight: 0.39 lbs / 175 g
- Screw: PH TP+N: 0.157” x 0.984”
- Anchor: PE0.236” x 0.984”
- Verizon Router (unit with bracket):
- Size: 4.72” wide x 13.56” high x 7.22” deep
- Weight: 3.35 lbs / 1.519 kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>