Great Little Trading Co L5248 Children’s Wall Bookcase Instruction Manual

Great Little Trading Co L5248 Children’s Wall Bookcase

Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone’s favourite way to spend their time, so we’ve tried to make assembling this item as quick and painless as possible

A few important pointers before you start:

• Please read the instructions right through before you start, and check that all the components have been included in the pack; we find separating all the hardware into piles makes it easier to be sure that everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required, but screw drivers and other tools are not. You’ll find details of the tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete, just in case you accidentally discard smaller parts or hardware.

Could we do better?
If there is anything you think could be improved in these instructions or in the assembly of this product we’d be grateful if you could let us know; we’ll pass any helpful hints and tips on to other customers via our website and update the instructions. All you need to do is drop us a line at instructions@gltc.co.uk Thank you

SAFETY WARNINGS

• Adult assembly required.
• Assembly to be carried out by a competent adult only. During assembly children should be kept away from the product due to possible risk of injury. Do not use this item if any components are missing or damaged.
• In an unassembled state product contains small parts which may pose a choking hazard, not suitable for children under 3 years.
• DO NOT use power tools in the assembly of this product as there is a risk of over-tightening and consequently splitting of the wood.
• DO NOT let children climb or hang on drawers, doors or shelves.
• Max Shelf Loading : 20kgs.
• Wall fixings not included. Please use appropriate fixings that are suitable for the wall type. If in doubt, please seek professional advice.
• Regularly check all fixtures and fittings to ensure that they properly tightened and tighten as necessary.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

Product care:

• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or abrasive material.
• Do NOT expose the item to extremes of heat and humidity.

Customer Service:
Should you have any queries regarding your product, missing parts or information and need help please follow the guidance below. For gltc.co.uk orders contact GLTC Customer Services on 0344 848 6000. For all other orders please contact your retailer.

Please read the instructions right through before you start, and check that all the components have been included in the pack; we find separating all the hardware into piles makes it easier to be sure that everything is present and correct. Make sure you have the right tools. Allen keys are provided if required, but screw drivers and other tools are not. You’ll find details of the tools you need at the beginning of the instructions.It’s a good idea to build the unit in the room where you are going to be using it, to avoid the need to move it after it’s been assembled. Do not throw away any packing materials until assembly is complete, just in case you accidentally discard smaller parts or hardware.

Component Check List

You will also need (not supplied):
x4 Screws and Wall Plugs (appropriate for your wall type.) See installation guide for details.

Installation Guide

PLEASE READ BEFORE ASSEMBLING THE BOOKCASE

Hardware : You must use hardware & wall plugs that are suitable for the wall where the bookcase is to be mounted. It is not provided. Ensure you have 4 suitable length countersunk screws/hardware and that the heads of the screw locate and slide up into the narrow part of the keyhole fixing plates without pulling out. If they are needed for your wall type, also ensure that you also have the correct size and type of wall plugs for the screws you are using and that you have the correct sized drill bit too. If you are unsure, we recommend seeking professional advice before proceeding further

Tools Needed : Spirit level, pencil, tape measure, drill and drill bits to hand. Plus the hardware suited to the wall you are mounting the bookcase on.

1. Decide where you to intend to fit the bookcase.
2. Check the wall for pipes and cables.
3. Take one of the side panels (either A or B) and place the panel with the outside face flat against the wall, whilst ensuring the narrow part of the keyhole fixing slot is uppermost. Ensure that the panel is vertically straight using the spirit level.
4. Mark the position of the centre of the narrow part of the fixing slots on the wall. Mark the positions of both upper and lower keyhole fixing with a pencil.
5. Remove the side panel from the wall and using the tape measure and spirit level, measure 784mm horizontally to mark the centres for the other two mounting points.

DO NOT DRILL THE WALL YET – Proceed with the building of the unit.

AFTER ASSEMBLING THE BOOKCASE

Reminder : You must use hardware & wall plugs that are suitable for the wall where the bookcase is to be mounted. It is not provided. Please see earlier guidance on the hardware required. If you are unsure, we recommend seeking professional advice before proceeding further.

1. Check the measurements between all the centres of the keyhole fixings on the built bookcase are the same as those marked on the wall. If there is a slight difference, remeasure and adjust the wall markings until you are satisfied that these are all correct.

2. Drill the holes in the wall and fit the wall plugs (if using).

3. Add the screws and ensure that the head of the screw is sufficiently proud of the wall to locate into the keyhole fixing slots.

4. Carefully take the bookcase to the 4 screws and once each is located correctly, move the unit down to secure to the wall. Each screw head may need to be adjusted in or out slightly to help with each location point.

5. ALL 4 KEYHOLE FIXINGS MUST BE USED TO LOCATE THE BOOKCASE ON THE WALL. The bookcase can hold up to 20kgs of books.

MOUNTING INSTRUCTIONS

1. STEP 1: Insert x4 cam dowels (#1) and x8 wooden dowels (#3) to side panel A.

2. STEP 2: Attach the shelf panels C to the left side panel A with x4 cam locks (#2).
   Note : The lip of the shelf panels should be at the front of panel A facing upwards. The back of panel A is highlighted by the keyhole hooks
   Using Cam Locks:
   When inserting into the panel, ensure that each cam lock’s arrow is pointing towards the drill hole on the side edge of the panel & the dowel that it will be receiving. When the panels are in the connected position, using a screwdriver, turn the cam lock in a clockwise direction to lock and secure.

3. STEP 3: Attach the rods using x4 bolts (#4).

4. STEP 4 : Insert x4 cam dowels (#1) to side panel B.

5. STEP 5 : Position the right side panel B using x8 wooden dowels (#3) and secure into place with x4 cam locks (#2).

6. STEP 6 : Secure the right side panel B using the remaining x4 bolts (#4).

7. STEP 7 : The bookcase is now ready to mount to the wall. Please refer to the installation guide for wall mounting instructions

Copyright© 2012 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

References

• Great Little Trading Co. | Children’s Storage, Furniture & Toys

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>