Yealink A30 Ring Central Conference Room Camera Instruction Manual
- July 25, 2024
- Yealink
Table of Contents
Quick Usage
Hardware Introduction
MeetingBar A10
| No. | Item | Description |
|---|---|---|
| 1 | LED Indicator | Indicate the device status. |
| 2 | Camera | Camera with an electric privacy shutter. |
| 3 | DC48V | Connect to a power source via a power adapter. |
| 4 | Internet Port | Connect to a network device. |
| 5 | HDMI Port | Connect to a display for image output. |
| 6 | USB-C Port | Connect the USB-C cable to use wired content sharing or wired |
Device Mode.
7| VCH Port| Reserved port.
8| USB-A Port| Connect to USB accessories, such as mouse/Yealink Wireless
Presentation Pod.
9| Line-in Port/Line-out Port| Connect to an audio output/input device via an
audio cable (3.5 mm).
10| Reset Key| Reset the MeetingBar A10 device to factory defaults.
MeetingBar A20
No.
| Item|
Description
---|---|---
1| LED Indicator| Indicate the device status.
2| Camera| Camera with an electric privacy shutter.
3| Reset Key| Reset the MeetingBar A20 device to factory defaults.
4| DC48V| Connect to a power source via a power adapter.
5| HDMI 1 Port&HDMI 2 Port| – Connect to a display for video image output.
– You need to use HDMI 1 Port first when using only one display. Otherwise,
the A20 cannot output images.
6| VC Hub/Phone Port| – If you want to use wired sharing to present, connect
this port to the PoE port on the VCH51 video conferencing hub.
– This port can also be connected to
VCM34
and
VCM38
to optimize the audio experience.
7| Internet Port| Connect to a network device.
8| Security Slot| Allow you to connect a universal security cable to the
device so that you can lock the device down. The device cannot be removed when
locked.
9| USB-A Port| Connect to USB accessories, such as mouse/Yealink Wireless
Presentation Pod.
MeetingBar A30
| No. | Item | Description |
|---|---|---|
| 1 | Camera | Camera with an electric privacy shutter. |
| 2 | LED Indicator | Indicate the device status. |
| 3 | Reset Key | Reset the MeetingBar A30 device to factory defaults. |
| 4 | DC48V | Connect to a power source via a power adapter. |
| 5 | VC Hub/Phone Port | – If you want to use wired sharing to present, connect |
this port to the PoE port on the VCH5I video conferencing hub.
– This port can also be connected to
VCM34
and
VCM3S
to optimize the audio experience.
6| Line-in Port/Line- out Port| Connect to an audio output/input device via an
audio cable (3.5 mm).
7| HDMI 1 Port&HDMI 2 Port| – Connect to a display for video image output.
– You need to use HDMI 1 Port first when using only one display. Otherwise,
the A30 cannot output images.
8| Internet Port| Connect to a network device.
9| Security Slot| Allow you to connect a universal security cable to the
device, so you can lock the device down. The device cannot be removed when
locked.
10| USB-A Port| Connect to a USB accessory, such as a mouse/Yealink Wireless
Presentation Pod.
CTP18
| No. | Item | Description |
|---|---|---|
| 1 | VCH Port | It can be powered by a PoE power adapter to transmit the network |
and data simultaneously.
2| Type-C Port| For developers to debug.
3| Reset Key| Reset the CTP18 device to factory defaults.
MeetingBar AX0 LED Indicator
| MeetingBar A10/A20/A30 LED Status | Description |
|---|---|
| Off | The device is not powered on. |
| Solid green | -The device is initializing. |
-The device is working (calling/sharing content).
Flash green| The device has incoming calls.
Solid red| The device is muted.
Solid orange| The device is in idle status.
Flash orange| The device is upgrading firmware.
Familiarize with Interface
NOTE
Before powering the system for the first time, please refer to MeetingBar
A10,
MeetingBar
A20,
MeetingBar
A30
or
CTP18
to complete the initial configuration.
Home Interface
| No. | Description |
|---|---|
| 1 | The local time. |
| 2 | The meeting room (account) name. |
| 3 | If you’ve configured a Calling Plan for your Teams account, it displays the |
account’s work
number.
4| Start an instant meeting.
5| If you’ve configured a Calling Plan for your Teams account, you can join a
meeting by dialing a
phone number.
6| Whiteboard.
7| Start/stop sharing.
8| Join with a meeting ID.
9| Configure the video conferencing device.
10| Scheduled meetings.
11| Join an invited meeting.
12| Return to the home page, configure settings and camera, or enter the help
center.
Meeting Interface
| No. | Description |
|---|---|
| 1 | Display the remote video screen. |
| 2 | Meeting control toolbar. |
| 3 | Display the local video screen. |
Quick Usage
When you complete the Deployment &
Connection
and Quick
Setup,
you can use the meeting room system directly.
| Description | Related Document |
|---|---|
| Start an instant meeting. | [Instant |
Meeting](https://support.yealink.com/en/portal/knowledge/show?id=6459d53c0a11b818a7542516)
Join a meeting.| Join
Meeting
Invite a member to the meeting.| Invite
Participants
Starting sharing via the WPP20.| Wireless Content
Sharing
Starting sharing via cable.| Wired Content
Sharing
Use the wireless device mode.| Wireless Device
Mode
Use the wired device mode.| Wired Device
Mode
Camera control.| Camera
Control
FAQ
Where are the built-in microphone and speaker on the MeetingBar
A10/A20/A30?
The built-in microphone and built-in speaker of the MeetingBar A10/A20/A30 are
respectively distributed on both sides. The following figure takes the
MeetingBar A30 as an example.
Can I control MeetingBar A10/A20/A30 with a touch display instead of
CTP18?
AX0 with a touch display can perform basic control and use the whiteboard
function but cannot control the camera.
After AX0 is paired with the CTP18, it can control the camera and other
operations.
References
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
- Yealink Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>