Weller WLIR Series Soldering Iron User Manual Product Information

: June 1, 2024
: Weller

Table of Contents

WLIR Series Soldering Iron
Product Information
Specifications
Product Usage Instructions
Specified Conditions Of Use
Safety Information
- FAQ
Q: What should I do if the soldering tool is damaged?
Q: How should I store the soldering tool when not in use?
Q: Can I replace solder tips while they are hot?

WLIR Series Soldering Iron

Product Information

Specifications

Models: WLIR30, WLIR60, WLIR80, WLIRPK80
Available Variants: SI 120, SI 175, SI 251
LED: 6x

Product Usage Instructions

Specified Conditions Of Use

Care and maintenance:

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons to
avoid hazards.
Use original replacement parts only.
Check all connected cables regularly and remove damaged power
tools from use immediately.
Repairs should be handled by a Weller-trained specialist.

Safety Information

Important safety guidelines:

Read instructions and safety guidelines carefully before
use.
Keep instructions accessible to all users and adhere to
connected devices’ operating instructions.
Comply with local safety regulations and keep other persons
away from the workplace.
Avoid using the soldering tool in damp or wet environments and
on voltage-carrying parts.
Avoid fire hazards by keeping combustible objects away from the
soldering tool and safety holder.
Prevent burns by handling hot soldering tips carefully and
using safety rests while not in use.
Disconnect the soldering tool when not in use and keep
explosive or flammable objects away from the device.

FAQ

Q: What should I do if the soldering tool is damaged?

A: If the soldering tool is damaged, it should be immediately
removed from use and repairs must be referred to a Weller-trained
specialist.

Q: How should I store the soldering tool when not in use?

A: Always place the soldering tool in the safety rest when not
in use to prevent burns and accidents. Ensure that the safety
holder is stable.

Q: Can I replace solder tips while they are hot?

A: No, only replace solder tips when they are cold to avoid
burns or accidents.

WLIR30 WLIR60 WLIR80 WLIRPK80

EN Translation of the original instructions

1 WLIR30 | WLIR60 | WLIR80

WLIRPK80

SI 120, SI 175, SI 251

DE Betriebsanleitung 7 GB Operating Instructions8 ES Manual de uso 9 FR Mode d’emploi 10 IT Istruzioni per l’uso 11 PT Manual do utilizador12 NL Gebruiksaanwijzing13 SV Instruktionsbok14 DK Betjeningsvejledning 15

CZ Návod k pouÏití20

PL Instrukcja obslugi21

HU Üzemeltetési utasítás 22

SK Návod na pouÏívanie23

SL Navodila za uporabo24

EE Kasutusjuhend25

LV Lietosanas instrukcija26

LT Naudojimo instrukcija 27

HEB

28

6x LED

SI 120, SI 175, SI 251

DE Betriebsanleitung 7 GB Operating Instructions8 ES Manual de uso 9 FR Mode d’emploi 10 IT Istruzioni per l’uso 11 PT Manual do utilizador12 NL Gebruiksaanwijzing13 SV Instruktionsbok14 DK Betjeningsvejledning 15

CZ Návod k pouÏití20

PL Instrukcja obslugi21

HU Üzemeltetési utasítás 22

SK Návod na pouÏívanie23

SL Navodila za uporabo24

EE Kasutusjuhend25

LV Lietosanas instrukcija26

LT Naudojimo instrukcija 27

HEB

28

2

45°

3
WLIR30 | WLIR60 | WLIR80 LED

WLIRPK80

4
°C °F °C °F

Specified Conditions Of Use
Use the soldering iron exclusively for the purpose indicated in the Operating Instructions of soldering and desoldering under the conditions specified here. The unit must not be exposed to temperatures above 50°C, naked flame or condensed solvents. Protect against moisture and direct sunlight.
Care and maintenance
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Use original replacement parts only.

Check all connected cables on a regular basis. If power tools are damaged, they must be immediately removed from use. Repairs must always be referred to a Weller-trained specialist.

EN

English

Read these instructions and the safety guidelines carefully before starting up the unit and starting work. Failure to observe the safety regulations results in a risk to life and limb. Keep these instructions in a place that is accessible to all users. Please adhere to the operating instructions of the connected devices.
Safety information
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. Keep your work area clean and tidy. Untidy workplaces and workbenches increase the risk of accidents and injuries. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
The device and packaging are not toys.Comply with the local injury prevention regulations and safety regulations in the work area.
Keep other persons well away from your workplace. The work area is out of bounds for children and unauthorised persons. Never allow other persons to touch the soldering tool or cable.
WARNING Electrical shock Do not use the soldering tool in a damp or wet environment. Never work on voltage-carrying parts.
WARNING Fire hazard Covering the soldering iron or the safety holder poses a fire hazard. Always keep objects well away from the soldering iron and safety holder. Always keep objects well away from the soldering iron and safety
holder. Keep all combustible objects, liquids or gases well away from the hot
soldering tool. Do not place or leave the hot soldering tip on the worktop or on
plastic surfaces. Avoid unintentional operation. Disconnect the soldering tool from the power supply while not in
use. Keep explosive and flammable objects well away from the device.
WARNING Risk of burns
The soldering tip becomes very hot during soldering work. There is a risk of burns from touching the tips. After the soldering process, the soldering tool and the workpiece holder are still hot. Always place the soldering tool in the safety rest while not in use.
Make sure the safety holder is stable. Do not touch the hot soldering tips and keep them away from
inflammable objects. Only replace solder tips when cold
Risk of burning through liquid solder. Protect yourself against solder
splashes. Wear appropriate protective clothing to protect yourself against
burns. Protect your eyes by wearing eye protection.
When working with adhesives, special attention must be paid to the
warning information provided by the adhesive manufacturer.
Store your soldering tool in a safe place..When not in use, units and tools should be stored in a dry, high or locked area out of the reach of children. Make sure that unused soldering tools are free of voltage and de-pressurised. Always place the soldering tool in the safety rest while not in use. Prevent the soldering tip from becoming seized. A thin graphite layer applied to the thin end of the soldering tip, plus frequent withdrawal of the soldering tip, prevents unpleasant seizure. During soldering breaks, always ensure that the soldering tip is well tin-coated. Always use the correct soldering tin. For normal electrical connections, use a solder with as low an acid content as possible together with a mild fluxing agent. Soldering tip range: Please visit www.apex-tools.eu. www.apex-tools. eu. Do not use the cable for purposes other than those for which it is intended. Never carry the unit by the cable. Do not use the cable to pull the plug out of the socket. Protect the cable against heat, oil and sharp edges. Be alert. Pay attention to what you are doing. Be smart when using the unit. Do not use the soldering tool if you are having difficulty concentrating. Avoid abnormal posture. Arrange your work station in an ergonomically correct way. Avoid bad posture when using the unit, as this can lead to postural problems.
The soldering tool must be operated only in perfect technical working order. Safety devices must not be deactivated. Faults and defects must be repaired immediately. Before using the unit / tool, safety devices must be carefully checked to make sure that they are functioning properly and in the manner intended. Check that moving parts are functioning properly and are not sticking, and whether parts are damaged. All parts must be correctly fitted and must satisfy all the requirements necessary to guarantee troublefree operation of the unit. Use the correct tool. Use only accessories or auxiliary devices which are included in the list of accessories or approved for use by the manufacturer. Use WELLER accessories or auxiliary devices on original WELLER equipment only. The use of other tools and other accessories can cause injury. Secure the workpiece. Use clamping fixtures to hold the workpiece. Use a solder fume extraction unit. If appliances for connecting solder fume extraction units are available, ensure that they are connected and used properly.

WARNING Risk of burns
Only replace solder tips when cold
The soldering tool must be left switched off in the safety rest for at least 3 minutes until the soldering tip has cooled down.
Warranty
Limited Warranty Warranty Periods and Exceptions ATG warrants to each original Customer of Products sold by ATG that such Products are, at the time of delivery to the original Customer and for the applicable period of 7 years, free of material and workmanship defects for the applicable periods noted (`the Warranty Period”) For more information please visit www.weller- tools.com.
Symbols

Caution!
Australian Conformity Mark

Warning! Risk of burns
Read the operating instructions!
British Conformity Mark

Technical Data

Soldering iron

WLIR30

WLIR60

High temperature Limit °C High temperature Limit °F Power consumption
Mains supply voltage Tip type series LED Lights

400 °C 750 °F

485 °C 900 °F

30 W

60 W

230 VAC / 50 Hz