ARAS SECURITY E5FD3D1B1439 Koop uw Adapter Plate in White for Bullet User Guide
- June 9, 2024
- ARAS SECURITY
Table of Contents
SECURITY E5FD3D1B1439 Koop uw Adapter Plate in White for Bullet
User Guide
E5FD3D1B1439 Koop uw Adapter Plate in White for Bullet
Box contents
Required:
Installing the adapter plate
-
Determine which hole pattern to use by measuring the threaded holes on your junction box.
-
Locate the corresponding pattern on the adapter plate and drill the holes.
-
To avoid junction box water ingress we recommend to apply sealant between the Adapter plate and the wall.
Make sure the junction box can carry the weight of the installed camera.
Wall mount is also supported, refer to the Datasheet for more information. 9.
Attach the adapter plate to the junction box or wall using suitable screws 10.
Attach the Bullet wall bracket to the adapter plateusing the supplied screws
and washers.
11. Refer to the Bullet camera Mounting guide for the final installation
steps.
Ava Bullet – Adapter Plate • Mounting guide
AVA-ADA-PLA-MG-01
Copyright © 2022, Ava Video Security. All rights reserved.