AIRZONE AZAI6WSCMD4 Aidoo WiFi Control User Guide
- June 17, 2024
- AIRZONE
Table of Contents
AIRZONE AZAI6WSCMD4 Aidoo WiFi Control
Device to manage and integrate units remotely from the Cloud. Online control with the “Airzone Cloud” App (available for iOS and Android). Wireless Wi-Fi connection. Externally powered by the indoor unit.
Features
- Control of the parameters of the unit.
- Communication errors detection.
- Temperature and operating mode time schedules.
- Multi-user and multi-session.
- Port for integration via Modbus protocol.
For further information about our products, go to airzonecontrol.com
TECHNICAL SPECS
Connection to indoor unit
| Type of power supply | Vdc |
|---|---|
| V max | 18 V |
| I max | 137.5 mA |
| V in | 12 – 16 V |
| Consumption | 0.85 W |
| Type of cable | Kaysun V5 (HAHB) connect Conector Midea |
| Wire length | 2.5 m (8.2 ft) |
WI-FI Communication
| Protocol | WI-FI – CERTIFIED TM 802.11b/g/n (802.11n up to 150 Mbps) |
|---|---|
| Model | ESP-WROOM-32 |
| Communication frequency | **** 2.4 GHz |
| Maximum power – Antenna power | **** 20 dBm |
| Sensitivity | – 97 dBm |
| IP address | DHCP |
Bluetooth Communication
| Protocol | Bluetooth v4.2 BR/EDR and BLE specification |
|---|---|
| Bluetooth class | Class-1, class-2 and class-3 |
transmitter
RS-485 Port
Shielded twisted pair| 2 x 0.22 + 2 x 0.5 mm2 (AWG 23 – 2 wired + AWG 20 – 2
wired)
---|---
Communi- cation protocol| RS-485
Par – 19200 bps
Operating temperatures
| Storage | – 20 … 70 ºC (- 4 … 158 ºF) |
|---|---|
| Operation | 0 … 45 ºC (32 … 113 ºF) |
| Operating humidity rango | 5 … 90 % |
(non-condensing)
Mechanical aspects
| Protection class | IP 41 |
|---|---|
| Weight | 130 g (0.29 lb) |
Check the indoor units compatible:
DEVICE ELEMENTS
| Nº | Descripción / Description / Descrição |
|---|---|
| 1 | Cable Midea / Kaysun V5 (HAHB) |
| 2 | [Puerto RS-485 / RS-485 port / |
Porta](https://doc.airzone.es/producto/Gama_AZ6/Airzone/Aidoo/MI_AZAI6_MODBUS_A4_MUL.pdf)
RS-485
3| Indoor unit port
4| Device reboot
5| Association process reset
6| Power supply
7| External power input
SELF-DIAGNOSIS
| Nº | Meaning |
|---|
| Connecting to WI-FI network| Blinking| ****
Green
Connected to WI-FI network| Steady
Connected to the server| Steady| Blue
Not configured| Off| –
| Cloud communication| Blinking| Red
| Microprocessor activity| Blinking| Green
| Power supply| Steady| Red
A| Data transmission to the indoor unit| Blinking| Red
B| Data reception from the indoor unit| Blinking| Green
ASSEMBLY AND CONNECTION
Important: The unit controller must remain working in parallel with your Aidoo. This gateway is compatible only with KJR-120X thermostat or equivalent.
-
Perform the assembly following the next step:
a. Screw attachment.
b. Double-sided adhesive attachment. -
Disconnect the indoor unit.
-
Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, HAHB.
-
Connect the Aidoo to power supply. Power the indoor unit. Check the LEDs (see Self-diagnosis section).
-
Download the app and follow the steps below for its setting. Access the support section to see the user manual.
Important : The equipment shall be supplied by a limited power source meeting class PS2 of the standard IEC 62368-1.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>