lionelo Timmy Scooter User Manual

lionelo Timmy Scooter

Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com

Producer:
BrandLine Group Sp. z o. o.
A. Kręglewskiego 1, 61-248 Poznań, Poland

WARNINGS:

1. Warning: Protective equipment should be worn. Not to be used in traffic. 50 kg max.
2. Wear protective equipment (helmet, elbow and knee pads, gloves) when using the scooter.
3. Make sure all locking devices are switched on before use.
4. The scooter is designed for children aged 3 and over.
5. The scooter is designed for one person.
6. The scooter should only be installed, dismantled and adjusted by an adult and away from children.
7. Do not use the scooter on a sloping or uneven surface.
8. Do not use the scooter near traffic.
9. The product should not be used during unfavorable weather conditions (e.g. freezing temperatures, rain, snow, icy conditions).
10. Do not use the scooter near potentially dangerous areas (e.g. a swimming pool).
11. The safest areas to ride the scooter are areas with limited or no motorized traffic, such as private areas, recreational areas, playgrounds and school playing fields.
12. A child using the scooter should be supervised by an adult.
13. A child using the scooter should wear footwear.
14. The product should be handled with care. The user is required to have the skills to avoid falls or collisions that cause injury to the user or others.
15. Before each use, check the scooter for damage, loose connections or missing components. Do not use the product if a component is missing or damaged. In this case, contact the manufacturer’s authorised service centre.
16. Do not pull the scooter behind a car or other vehicle.
17. Keep the product away from heat sources, high temperatures, hot surfaces, sources of spark, open flames, oil and sharp edges.
18. Store the product in a dry place.
19. Keep plastic packaging away from children, as it poses a strangulation risk.

BATTERY WARNINGS

1. Disposable, non-rechargeable batteries should not be charged.
2. Do not insert different types of batteries or new and used batteries into the device.
3. Batteries must be inserted with the correct polarity.
4. Dead batteries should be removed from the toy.
5. The power supply terminals should not be short-circuited.
6. If the product is not used for a long time, remove the batteries from the compartment.

DESCRIPTION OF THE PARTS (FIG. A)

1. Handlebars
2. Height adjustment button
3. Fold button
4. Locking mechanism
5. Wheels
6. LED light
7. Brake
8. Battery compartment
9. LED light button

BATTERY INSTALLATION IN THE PRODUCT

1. Loosen the battery cover screw with a screwdriver. Remove the battery cover (fig. 8).
2. Insert three AA 1.5 V batteries. Pay particular attention to the correct polarity of the batteries.
3. Put the cover back on. Tighten the screw with a screwdriver.

USE

Unfolding
To unfold the scooter, pull the locking mechanism (fig. 1) in the direction indicated by the arrow (fig. 1a) and then lift the handlebars upwards (fig. 2). Make sure the scooter is correctly unfolded by gently pressing down on the handlebars (fig. 3). Correct unfolding will be signaled by a click.

Folding
To fold the scooter, press the fold button (fig. 4) and then pull the locking mechanism (fig. 5) in the direction indicated by the arrow (fig. 1a). Then lower the handlebars down (fig. 6) and fold the scooter (fig. 7).

LED light function
To activate the LED light in the platform of the scooter, press the button on the bottom of the platform (9, fig. A). Activation of the LED light in the front wheels is triggered by movement.

Braking
Braking takes place by pressing with your foot the brake located on the rear axle of the scooter (7, fig. A).

Handlebars height adjustment

To adjust the height of the handlebars:

1. Loosen the locking mechanism by turning it in a counterclockwise direction (fig. 9).
2. Press the height adjustment button (2, fig. A) and then set the selected height of the handlebars (fig. 10).
3. Make sure the height adjustment button has changed to a higher or lower position. The correct position will be signaled by a click.
4. Tighten the lock by turning it clockwise.

CLEANING AND MAINTENANCE

• Clean the frame and all parts of the scooter with a damp cloth and a mild detergent. After cleaning, wipe the scooter dry.
• Do not use caustic or abrasive products to clean the product.
• The photos are for illustrative purposes only, the actual appearance of the products may differ from those shown in the images.

www.lionelo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>