AIRZONE AZAI6WSCxxx Aidoo WiFi Toshiba User Manual
- June 17, 2024
- AIRZONE
Table of Contents
AIRZONE AZAI6WSCxxx Aidoo WiFi Toshiba
AIDOO WI-FI TOSHIBA
Device to manage and integrate units remotely from the Cloud. Online control with the “Airzone Cloud” App (available for iOS and Android). Wireless Wi-Fi connection. Externally powered by the indoor unit.
Features:
- Control of the parameters of the unit.
- Communication errors detection.
- Temperature and operating mode time schedules.
- Multi-user and multi-session.
- Port for integration via Modbus protocol.
For further information about our products, go to airzonecontrol.com.
TECHNICAL SPECS
Connection to indoor unit
Type of power supply| Vdc
V max| 18 V
I max| 137.5 mA
V in| 12 – 16 V
Consumption| 0.85 W
Type of cable| Toshiba connector
WI-FI Communication
Protocol| WI-FI – CERTIFIED TM 802.11b/g/n (802.11n up to 150 Mbps)
Model| ESP-WROOM-32
Communication frequency| 2.4 GHz
Maximum power – Antenna power| 20 dBm
Sensitivity| – 97 dBm
IP address| DHCP
Bluetooth Communication
Protocol| Bluetooth v4.2 BR/EDR and BLE specification
Bluetooth class| Class-1, class-2 and class-3 transmitter
RS-485 Port
Shielded twisted pair| 2 x 0.22 + 2 x 0.5 mm2 (AWG 23 – 2 wired + AWG 20 – 2
wired)
Communication protocol| RS-485 Par – 19200 bps
Operating temperatures
Storage| – 20 … 70 ºC (- 4 … 158 ºF)
Operation| 0 … 45 ºC (32 … 113 ºF)
Operating humidity rango| 5 … 90 % (non-condensing)
Mechanical aspects
Protection class| IP 41
Weight| 130 g (0.29 lb)
TECHNICAL SPECS
Check the indoor units compatible:
FCC / ISED
This device complies with FCC / ISED regulatory notices.
DEVICE ELEMENTS
Nº | Description |
---|---|
1 | Cable Toshiba |
2 | RS-485 port |
3 | Indoor unit port |
4 | Device reboot |
5 | Association process reset |
**A**
Blue
**-**
Nero
**B**
Vert
**+**
Rouge
SELF-DIAGNOSIS
Nº|
Meaning
---|---
| Connecting to WI-FI network| Blinking| Green
Connected to WI-FI network| Steady
Connected to the server| Steady| Blue
Not configured| Off| –
| Cloud communication| Blinking| Red
| Microprocessor activity| Blinking| Green
| Power supply| Steady| Red
| Data transmission to the indoor unit| Blinking| Red
| Data reception from the indoor unit| Blinking| Green
Important: The unit controller must remain working in parallel with your Aidoo. Please note that Aidoo works only with the Toshiba TCC-Link protocol and is not compatible with thermostats or IR receivers of the RBC-AU and TCB-TCU series with TU2C-Link protocol.
-
Perform the assembly following the next step:
a. Screw attachment.
b. Double-sided adhesive attachment. -
Disconnect the indoor unit.
-
Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, A and B.
-
Power the indoor unit. Check the LEDs (see Self-diagnosis section).
-
- Download the app and follow the steps bellow for its setting. Access the support section to see the user manual.
|
---|---|---
Important: The equipment shall be supplied by a limited power source
meeting class PS2 of the standard IEC 62368-1.