FLYDIGI Vader 2 Pro Wireless Multi Platform Game Controller User Manual
- June 17, 2024
- FLYDIGI
Table of Contents
Vader 2 Pro Wireless Multi Platform
Game Controller User Manual
Basic Operations
Standard Mode | Power On/Off | Toggle the power switch to ON/OFF |
---|---|---|
Standby | If not used for more than 15 minutes. the controller will enter |
standby mode;press the
• button to wake it up
Low Battery| When the battery level drops below 10%. status LED 2 will flash
red.
Charging| Connect the charging port to the charging cable. Status LED 2 will
remain solid green.
Fully Charged| After charging is complete, status LED 2 will turn off.
Additional Buttons| The C, Z, Ml, M4 buttons can be customized as additional
buttons in the app.
Switch Mode| Button Mapping| The mapping of buttons to key values in Switch
mode can be found in thetable on the right.
One-Key Wakeup| If paired and connected. In Switch standby mode, pressing the
HOME button will wake up the Switch.
A| B
---|---
B| A
X| Y
Y| X
SELECT| –
START| +
HOME| HOME
–| CAPTURE
Connection Instructions
You want to use the controller| Connect to a Cellphone or tablet|
Connect to PC| Connect to Switch
---|---|---|---
Switching Method| Press the • button and the B button simultaneously for three
seconds| Press the • button and the A button simultaneously for three
seconds.| Connect the data cable to the computer| Press the • and the X button
simultaneously for three seconds
Connection Method| Bluetooth Connected| 2.4Gliz Receiver Connected| USB Wired
Connection| Bluetooth Connected
Supported Modes| Bluetooth Mode| 350 Mode, Android Mode
Pressing the • button and th SELECT button simultaneously for three seconds
can switch Behr eon 350 Mode and Android Mode.| Switch Mode
indicator Light Explanation| Indicator Light 1 Blue| Indicator Light 1 Is
white
If switched to Android Mode. Indicator Light 2 will light up solid red|
indicator Light 1 is orange
Operate On The Computer
Download “Flydigi Space Station”
Visit the official Flydigi website at “www. flydigi.com” to download the
Flydigi Space Station. This application allows you to perform advanced
adjustments on your controller and unlock additional hidden features.
Play Computer Games
Please connect the receiver or data cable to the computer. The controller will
be recognized automatically upon opening. The default 360 made can be used
directly on various gaming platforms. Switching to Android mode is suitable
for specific scenarios like computer Android emulators. Simultaneously press
and hold the + and SELECT button for three seconds to switch between 360 and
Android modes. When switching to Android mode, both indicator lights 1 and 2
will light up in red.
Operate On The Cellphone, Ipad & Tablet
STEP1: Download “Flydigi Game Center”
Scan the QR code to download and install the Flydigi Game Center.
or use a browser to visit the Flydigi official website at
www.flydigi.com to download
STEP 2: Bluetooth Connect To Cellphone
Go to Flydigi Game Center – Peripheral Management, click on ‘Connect
Controller,’ and fotlow the in-app instructions to establish the controller
connection.
Operate On The Switch
Connection Pairing
Turn on the controller, simultaneously press and hold the + button and the X
button for three seconds to switch the controller to Switch mode. Turn on the
Switch console, go to the [Controllers] option, and then, at this point, press
and hold the + button for three seconds to successfully pair.
Other Settings
In Switch mode, you can also customize the controller settings. Please visit
the Flydigi official website at www.flydigj.com to
download the Flydigi Space Station for accessing additional hidden
features.more operatio:
instructions. troubleshooting solutions, and to scan the code for the complete
version of the user manual.