CLAYMOR3 CLP-210(BK/RD/TN) Capon 40B Rechargeable Cap Light User Manual
- June 17, 2024
- CLAYMOR3
Table of Contents
CLAYMOR3 CLP-210(BK/RD/TN) Capon 40B Rechargeable Cap Light
Product Information
Specifications
- Model: 6TFS.BOVBM
- Power: $-:.03&$BQ PO#
- Input: $-1 #,3%5/
- Operating Temperature: 0 to 40 degrees Celsius
- Water Resistance: Yes
FAQ
- Q: Can I use this product near high temperatures?
- A: No, it is not recommended to use this product near high temperatures such as fires or heating equipment as it may cause explosion and ignition.
- Q: Is this product water-resistant?
- A: Yes, this product is water-resistant. However, if left in the rain for a long time, it may cause malfunction.
- Q: Can I disassemble or modify the product?
- A: No, it is advised not to disassemble or modify the product as it can be dangerous and may void the warranty.
- Q: What should I do if the connector gets wet?
- A: Do not touch the connector with wet hands to avoid electric shock. If the connector gets wet, dry it thoroughly before use.
- Q: Do I need to turn off the power after use?
- A: Yes, it is important to always turn off the power after use to prevent leakage and conserve energy.
- Q: What should I do if the product gets damaged?
- A: If the product gets damaged, stop using it immediately and contact customer support for further assistance. Do not attempt to repair it yourself.
- Q: How should I clean the product?
- A: Use a soft cloth to regularly clean the product. Avoid using harsh chemicals or abrasive materials as they may damage the surface.
This portable light contains Li-Polymer batteries. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased. Any modifications of this product will void the warranty. Misuse of CLAYMORE products may cause user harm.
Precautions
Caution
- Do not use near high temperatures such as fires or heating equipments. It may cause explosion and ignition.
- This product is water resistant. However, if left in the rain for a long time, it may cause malfunction. If the product gets soaked, please quickly wipe it off.
- Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
- Do not touch the light source directly as it may become very hot during use.
- Do not use if the product exceeds the operating temperature range (-10 ° C to 40 °C).
- Do not look directly into the LED light source.
- Please do not place in the reach of infants. It may cause swallowing of parts or injury.
- Adult supervision is necessary when used by children. Misuse of head lamp may cause injury or electric shock.
- Do not insert any metal parts into the terminal block of the connector. It may cause heat, explosion or electric shock.
- Do not disassemble or modify the product.
- Do not touch the connector with wet hands. There is a danger of electric shock.
- After use, be sure to turn off the power. If not, it may cause leakage.
- When adjusting the angle, please do not bend with force. It may cause damage to the product.
- Dropping or impacting the product can cause damage to the inside of the product, resulting in unexpected failures in normal use. Be careful not to apply impact to the body.
Components
Operation
ON/OFF
- Light turns on when pushing button shortly.
- Repeat to turn off the light.
Stepless Dimming
- When light is on, press and hold buton to increase brightness.
- Repeat to decrease brightness.
5 STEP Dimming
- Hold down button and press button to sequence to adjust brightness in 5 steps.
Light will blink once when Maximum and Minimum brightness is reached.
CCT Change
- When light is on, press button shortly to change
- 3 different light modes (Focused>Red>Flood)
MODE1
- Focused Light(12°) Spot
- Long distance (narrow)
MODE2
- Diffused Light(Red) Flood
- Short distance (wide)
MODE3
- Diffused Light(Cool White) Flood
- Short distance (wide)
SOS-Flash
- When light is on, press button over 2 seconds to access SOS signal in any mode.
Charging method
- Open rubber cover and connect USB cable to charge.
This lantern contains memory function that returns to the last setting it was set at.
Battery Level Check
- When charging, battery indicator will flicker in 3 steps to show remaining battery.
- (To see remaining battery, press button)
Battery level indicator
Instructions
Attaching to a cap
- Fully insert clip to the visor of the hat and adjust angle to use properly.
Please check if the clip is fully attached to cap bill before use.
Angle adjustment
- Able to adjust up to 180 degree and easy to use focused and diffused light.
Lantern Hook
- Compatable with carabiner or hang on string with hook.
Specification
|
Focused Light(12°)
| Diffused light(Red)|
Diffused light(Cool)
---|---|---|---
| MIN| MAX| MIN| MAX| MIN| MAX
Brightness| 16Lm| 230Lm| 1Lm| 20Lm| 16Lm| 230Lm
Operating time| 12hour| 2hour| 12hour| 2.65hour| 12hour| 2hour
Distance| 3m| 50m| | | |
| Product name | CLAYMORE Capon 40B | Size | 37×54.2×24mm |
|---|---|---|---|
| Model name | CLP-210(BK/RD/TN) | Weight | 29g |
| Battery capacity | Li-Polymer 3.7V 400mAh(1.48Wh) | Charging time | 1 hour 30 |
minute
Input| USB 5V 1A| Origin| MADE IN KOREA
Color temperature| Cool : 6200K (±15%), Red
Contents
Caution for long-term storage
- If the battery is completely drained, the battery indicator might not flash.
- If this happens, plug the USB cable back in or press the button to turn the battery indicator on again.
- For long-term storage, fully recharge the battery. (Repeat every six months)
- Please keep in mind that if stored below -10°C the battery life may be affected.
- Please keep in a dry place without moisture.
Warranty
- Item: CLAYMORE Cap on 40B
- Model No.: CLP-210(BK/RD/TN)
- Seller: ……………………….
- Date of Purchase: ……………………….
- Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
- This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.
Free Service
- Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge.
- Some shipping or handling charges may be involved.
- Warranty period: 1 year.
Charged Service
- Damage caused when the warranty period is over.
- Damage caused due to the user’s mishandling, abuse, or improper operation.
- Damage caused by arbitrary or personal repair or disassemble in unauthorized service center.
- Damage from input electricity or cable defect.
- Damage caused by natural disasters.
Contact
Prism Co., Ltd.
- 101-1501, Chunui-Technopark, Bucheon-ro 198 Road, 36, Bucheon-si, Gyeonggi-do, Korea
- www.claymorelight.com
- www.prismlight.co.kr
- info@prismlight.co.kr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>