CLAYMOR3 CLUF5-01LG/BK Claymore UF5 String Lights User Manual

June 17, 2024
CLAYMOR3

CLAYMOR3 CLUF5-01LG/BK Claymore UF5 String Lights

Please follow the user manual before use.
If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased. Any modifications of this product will void the warranty. Misuse of CLAYMORE products may cause user harm.

Caution

  1. Do not use near high temperatures such as fires or heating equipment.
    It may cause an explosion or ignition.

  2. This product is water resistant. However, if left in the rain for a long time, it may cause malfunction.
    If the product gets soaked, please quickly wipe it off.

  3. Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.

  4. Do not use if it exceeds the operating temperature range (-10 ° C to 40 ° C).

  5. Please do not place in the reach of infants. It may cause swallowing of parts or injury.

  6. Adult supervision is necessary when used by children. Misuse of light may cause injury or electric shock.

  7. Do not insert any metal parts into the terminal block of the connector.
    It may cause heat, explosion or electric shock.

  8. Do not disassemble or modify the product.

  9. Do not touch the connector with wet hands. There is a danger of electric shock.

  10. After use, be sure to turn off the power.

  11. Do not forcefully fold the connector, It may damage the product.

  12. If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use.
    Be careful not to apply physical shocks to the main unit.

  13. Please keep it in a dry place without moisture.

Components

Contents

Operation

Connecting to MULTI FACE
Open the rubber cover of the left or right OUTPUT port of the MULTI-FACE and connect the connector jack of CLAYMORE UF5. You can connect MULTIFACE and UF5 with a USB A(M)-A(F) extension cable to place UF5 apart from MULTIFACE.

The app, dimming, and LED color changing is available

LED Lantern Function

  • ON/OFF
    Press and hold the button on the MULTI-FACE for 2 seconds to turn on the light. (status indicator ON). Repeat to turn off the light.

  • 5 STEP Dimming
    When the light is ON, press the button to increase brightness. Repeat to decrease brightness.
    The light blinks once when Maximum and Minimum brightness are reached.

  • LED Color Change
    When the light is ON, press the button shortly to adjust the light color in 4 modes Warm→Orange→Soft Warm→Breeze

If you don’t use the OUTPUT port(USB-A) of MULTI-FACE, turn off the button to reduce unnecessary standby power consumption. (status indicator OFF)

Tip
If there’s no MULTI FACE, it can be used alone by connecting the CABLE to the portable charger

UF5 + MULTI CONTROLLER + Portable charger
When UF5 is connected to other devices (USB-A for fast charging), it may not work properly. If it does not work, please connect a Multi-controller additionally.

  • Multi-controller is not included.
  • The app is not available while using Multi-Controller.

4 Light Mode

Ways to use

You can use official accessories (Shade, Carabiner) to create a variety of presentations

  • Attaching a shade
    You can create a romantic atmosphere by attaching the silicon shade to the bottom

  • Attaching a carabiner
    You can hang with a carabiner

Specification

Operating time may vary depending on the battery capacity and external environment

Warranty

  1. Thank you for purchasing the CLAYMORE series of Prism Co., Ltd.
  2. This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.

Free Service

  1. Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or an authorized service center on free of charge.
    Some shipping or handling charges may be involved.

  2. Warranty period: 1 year.

Charged Service

  1. Damage is caused when the warranty period is over.
  2. Damage is caused due to the user’s mishandling, abuse, or improper operation.
  3. Damage caused by arbitrary or personal repair or disassembly in an unauthorized service center.
  4. Damage from input electricity or cable defect.
  5. Damage caused by natural disasters.

Prism Co., Ltd.
221, Pyeongcheon-ro, Bupyeong-gu, Incheon, Republic of Korea
www.claymorelight.com · www.prismlight.co.kr · info@prismlight.co.kr

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals