CLAYMOR3 CLC2-1300(BK/RD) Rechargeable Area Light User Manual
- June 17, 2024
- CLAYMOR3
Table of Contents
CLAYMOR3 CLC2-1300(BK/RD) Rechargeable Area Light
This portable light contains a Li-ion battery. Please follow the user manual
before use.
If any abnormality is found in the product, discontinue use and contact the
dealer or a service centre where the product was purchased. Any modifications
to this product will void the warranty.
Misuse of CLAYMORE products may cause user harm.
Caution
-
Do not use near high temperatures such as fires or heating equipment. It may cause an explosion or ignition.
-
This product is water resistant. However, if left in the rain for a long time, it may cause malfunction.
If the product gets soaked, please quickly wipe it off. -
Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
-
Do not touch the light source directly as it may become very hot during use. Use a handle to carry out.
-
Do not use it if it exceeds the operating temperature range (-10 ° C to 40 ° C).
-
Do not use external power other than USB 5V. It may cause heat and ignition.
-
Please do not place in the reach of infants. It may cause swallowing of parts or injury.
-
Adult supervision is necessary when used by children. Misuse of light may cause injury or electric shock.
-
Do not insert any metal parts into the terminal block of the connector.
It may cause heat, explosion or electric shock. -
Do not disassemble or modify the product.
-
Do not touch the connector with wet hands. There is a danger of electric shock.
-
After use, be sure to turn off the power.
-
If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use. Be careful not to apply physical shocks to the main unit.
Components
Operation
Charging
-
As shown in the figure, open the cover and connect the USB cable to the charging port.
Charging time may vary depending on battery capacity and external environment.
Please charge with the supplied USB cable with 5V 2A / 9V 2A / 12V 1.5A smart quick charger. -
When the product is being charged, the battery level indicator flickers. If the light is not flicking and all the lights are on, it indicates that the battery has been fully charged.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>