CLAYMOR3 CLF-500(LG/DG/MG) Rechargeable Mobile LED Lantern User Manual

: June 17, 2024
: CLAYMOR3

Table of Contents

CLAYMOR3 CLF-500(LG/DG/MG) Rechargeable Mobile LED Lantern
Product Information
Product Usage Instructions
FAQ
Components
Operation
Specifications
Warranty
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CLAYMOR3 CLF-500(LG/DG/MG) Rechargeable Mobile LED Lantern

$CLAYMOR3-CLF-500$LG-DG-MG$-Rechargeable-Mobile-LED-Lantern- PRODUCT$

Product Information

Specifications

Model: -&%-JHIU
Power Source: 9V
Brightness Control: 1VTI)PME
LED Color Change: 8BSN #SJHIU $PPM
Water Resistance: Yes

Product Usage Instructions

Power On/Off

To turn the product on or off, use the ON/OFF switch located on the device.

Brightness Control

To adjust the brightness of the LED light, use the Brightness Control feature. Rotate the control knob to increase or decrease the brightness level.

Mode Change

To switch between different modes, press the Mode Change button.
The light will blink once when the maximum and minimum brightness levels are reached.

LED Color Change

To change the LED light colour, press the LED Color Change button. The available options are:

Low colour temperature – warm light, similar to a gas lantern
Neutral colour temperature – daylight colour, provides a comfortable feeling
High colour temperature – cool light, similar to a fluorescent light

FAQ

Q: Can I use the product near high temperatures?
A: No, it is not recommended to use the product near high temperatures such as fires or heating equipment as it may cause explosion and ignition.
Q: Is the product water-resistant?
A: Yes, the product is water-resistant. However, if left in the rain for a long time, it may cause malfunction.
Q: Can I disassemble or modify the product?
A: No, it is not safe to disassemble or modify the product. Doing so may result in electric shock or other dangers.
Q: Can I use the product while charging?
A: No, the power bank function of the product cannot be used while charging the light.
Q: How should I handle the product to avoid damage?
A: To avoid damage, do not drop or impact the product. Also, do not apply force when adjusting the angle. Be careful not to apply impact to the body of the product.

This portable light contains Li-Polymer batteries. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service centre where the product was purchased. Any modifications to this product will void the warranty. Misuse of CLAYMORE products may cause user harm.

Caution

Do not use near high temperatures such as fires or heating equipment. It may cause explosion and ignition.
This product is water resistant. However, if left in the rain for a long time, it may cause malfunction.
If the product gets soaked, please quickly wipe it off.
Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
Do not touch the light source directly as it may become very hot during use.
Do not use if the product exceeds the operating temperature range (-10 °C to 40 °C).
Do not look directly into the LED light source.
Please do not place in the reach of infants. It may cause swallowing of parts or injury.
Adult supervision is necessary when used by children. Misuse of the headlamp may cause injury or electric shock.
Do not insert any metal parts into the terminal block of the connector. It may cause heat, explosion or electric shock.
Do not disassemble or modify the product.
Do not touch the connector with wet hands. There is a danger of electric shock.
After use, be sure to turn off the power. If not, it may cause leakage.
When adjusting the angle, please do not bend with force. It may cause damage to the product.
Dropping or impacting the product can cause damage to the inside of the product, resulting in unexpected failures in normal use. Be careful not to apply impact to the body.

Components

$CLAYMOR3-CLF-500$LG-DG-MG$-Rechargeable-Mobile-LED-Lantern- FIG-1$

Operation

LED Light

ON/OFF

Press shortly to turn on the light.
Repeat to turn off the light.

Brightness Control

When the light is ON, press and hold the button to increase brightness. Repeat to decrease brightness.
Light will blink once when Maximum and Minimum brightness are reached.

Mode Change

When the light is ON, press the button twice to change the light mode.
Centre light ↔ three side light.

$CLAYMOR3-CLF-500$LG-DG-MG$-Rechargeable-Mobile-LED-Lantern- FIG-6$

LED Color Change

When the light is on, press the button shortly to adjust the light colour in three steps: Warm -> Bright -> Cool.

Warm| LED light with low colour temperature, and warm light feels like

ordinary gas lantern

---|---
Bright| LED light with a neutral colour of daylight and a comfortable feeling
Cool| LED light with high colour temperature, cool light feels like

ordinary ﬂuorescent light

SOS-Flash

When the light is OFF, hold the button for over 2 seconds to access the SOS signal.

Power Bank Function

When a device is connected to the light it will automatically start charging. (On status: Battery indicator turns on)
A power bank cannot be used while charging the light.

Charging

Open the rubber cover on the side and connect a USB-C type cable to charge the lantern.
When the product is charging, the battery indicator flickers. If the light is not flicking and all the lights are on, it indicates that the battery has been fully charged.

Battery Level Indicator

$CLAYMOR3-CLF-500$LG-DG-MG$-Rechargeable-Mobile-LED-Lantern- FIG-12$

This light contains a memory function that returns to the last setting when turned off and on.

Instructions

This product is compatible with a strap and carabiner.
When using a carabiner, be sure to insert it into the lower hole of the strap. (Prevent product fall in case of emergency)

To mount on a camera tripod

Turn the fixing screw on the camera tripod into the socket and fix it.
It can be used with all 1/4-inch screw accessories.

Specifications

Product name	CLAYMORE 3Face mini
Model No.	CLF-500(LG/DG/MG)
Colour temperature	Warm: 3000K, Bright: 4200K, Cool: 6500K (±15%)
Brightness	40~800 Lm
Run time	6hr 30min ~ 60hr
Size	78×102.5×19.7mm
Weight	159g
Battery type/capacity	Li-Polymer 3.7V 5,000mAh(18.50Wh)
Charging time	2hr 40min
Input	USB 5V 2A
Output	5V 2A
Origin	MADE IN KOREA

Contents

$CLAYMOR3-CLF-500$LG-DG-MG$-Rechargeable-Mobile-LED-Lantern- FIG-15$

Caution for long-term storage

If the battery is completely drained, the battery indicator might not flash.
If this happens, plug the USB cable back in or press the button to turn the battery indicator on again.
For long-term storage, fully recharge the battery. (Repeat every six months)
Please keep in mind that if stored below -10°C the battery life may be affected.
Please keep it in a dry place without moisture.

Warranty

Item: CLAYMORE 3Face mini
Model No: CLF-500(LG/DG/MG)
Seller:
Date of Purchase

Thank you for purchasing the CLAYMORE series of Prism Co., Ltd.
This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service centre listed below.

Free Service

Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or an authorized service centre on free of charge.
Some shipping or handling charges may be involved.
Warranty period: 1 year.

Charged Service

Damage is caused when the warranty period is over.
Damage is caused due to the user’s mishandling, abuse, or improper operation.
Damage caused by arbitrary or personal repair or disassembly in the unauthorized service centre.
Damage from input electricity or cable defect.
Damage caused by natural disasters.