CLAYMOR3 CLL-650WH/DG LAMP Selene LED User Manual
- June 17, 2024
- CLAYMOR3
Table of Contents
CLAYMOR3 CLL-650WH/DG LAMP Selene LED
This portable light contains a Li-ion battery. Please follow the user manual
before use.
If any abnormality is found in the product, discontinue use and contact the
dealer or a service center where the product was purchased. Any modifications
of this product will void the warranty.
Misuse of CLAYMORE products may cause user harm.
Caution
- When using the product for the first time or storing it for an extended period, please charge the battery fully.
- Keep out of reach of children. (For children under the age of 10, please use under adult supervision.)
- Do not disassemble, modify, or repair on your own.
- Do not disassemble, or modify the rechargeable battery. It may cause an accident or injury due to ignition, leakage, heat generation, or rupture.
- Be careful in humid environments (e.g. bathroom) or flooding. Discontinue use in case of contact with water.
- If the temperature rises or the outer appearance deforms during charging, discontinue use and contact a customer center.
- Do not use it in high-temperature environments such as near fire or heating appliances. It may cause an explosion or ignition.
- Do not touch with wet hands. There is a danger of electric shock.
- Do not use in conditions exceeding the acceptable operating temperature range (-10°C~40°C).
- Do not store or use in vehicles exposed to direct sunlight. It may cause an explosion or malfunction.
- Do not charge it in contact with easily flammable materials like carpets or blankets.
- After use, be sure to turn off the power for storage.
- If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use. Be careful not to apply physical shocks to the main unit.
Components
Operation
LED Lantern Function
- Power
- Light mode control
- Battery check
- Push
Press the button shortly to turn on the light. ON: Mood1 > Mood2 > Mood3 >
Mood4 > OFF
Battery indicator shows battery remaining When turning on the lights.
Brightness Control
When the light is on, rotate the dial clockwise to increase brightness. Rotate
the dial counterclockwise to decrease brightness.
Blinks once when Maximum and Minimum brightness is reached
4 different light Mood
Charging Method Open the rubber cover on the back and connect a USB-C type cable to charge the lantern. When charging, the battery indicator will flicker. If the indicator does not blink and stays lit, it indicates charging is complete.
Power Bank Function
Open the rubber cover on the back of the main unit and connect the USB cable
to the charging port to initiate charging.
When charging, the charging indicator will light up.
- It is not possible to charge the product and use the power bank at the same time.
- Charging time may vary depending on the battery capacity of the product or external devices and the external environment.
Specification
Installation
You can put it on the table or use accessories to create a variety of presentations.
Handle & Hook
There is an arched handle for convenient portability, and it can be used
hanging by connecting a carabiner.
Using tripod socket
Screw the camera tripod, lantern stand into the1/4 inch tripod socket at
the bottom to fix it. It can be used in various ways by connecting to all
products using 1/4 inch screws.
A lantern stand is not included.
Warranty
- Thank you for purchasing the CLAYMORE series of Prism Co., Ltd.
- This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.
Free Service
- Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or an authorized service center on free of charge. Some shipping or handling charges may be involved.
- Warranty period: 1 year.
Charged Service
- Damage is caused when the warranty period is over.
- Damage is caused due to the user’s mishandling, abuse, or improper operation.
- Damage caused by arbitrary or personal repair or disassembly in the unauthorized service center.
- Damage from input electricity or cable defect.
- Damage caused by natural disasters.
Prism Co., Ltd.
- address: 221, Pyeongcheon-ro, Bupyeong-gu, Incheon, Republic of Korea
- www.claymorelight.com
- www.prismlight.co.kr
- info@prismlight.co.kr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>