Orion 15RCR 15 Inch LCD Rack Mount Monitor Instruction Manual
- June 17, 2024
- Orion
Table of Contents
15RCR 15 Inch LCD Rack Mount Monitor
RACK
MOUNT READY SERIES
(15 inches)
Installation and User’s Guide
http://www.orionimages.com
All contents of this document may change without prior notice, and actual
product appearance may differ from that depicted herein
SAFETY INSTRUCTION
Follow this safety instruction to use the monitor properly and prevent the
damages.
This safety instruction has “Warning” & “Caution” as below
Warning – If the user does not follow this instruction, it may cause the
serious damage to the user.
Caution – If the user does not follow this instruction, it may cause the
slight damage to the user or cause some damages to the monitor.
Keep this user’s guide book for later use.
Warning
Never remove the back over and touch the inside of the monitor. If you need a
service, please contact the service center. Keep away the monitor from the
direct sunlight and a heating appliance. Never push objects of any kind into
this product as they may result in a risk of fire or electric shock.
Connect the power code to the wall outlet tightly. If the power
code or plug are defective and the wall outlet is not tight, please do not use
them. Do not install this monitor on the outside and near water. If may cause
damage to the product, electric shock and fire.
For cleaning do not use liquid
cleaners. Never touch the power plug with wet-hands.
When lightning and
thundering, unplug the monitor from the wall outlet and never touch it.
Unplug this product from the wall outlet, when It does not operate
for a long time.
When smoking and noising from the monitor,
unplug the product from the wall outlet and contact a service center.
WARNING: How to fix
Do not open this product as it contains high voltage inside.
It may create an electric shock.
It the user disassembles and remove the back cover, it does not make sure to
make up for the damages and do a service and exchange the monitor.
Cautions
Install this monitor some distance From the wall and do not install unless
Proper ventilation is provided. Place this product on a stable place. If not,
it may fall, causing serious Damages to the monitor and people. The openings
must not be blocked by curtain, rug or other similar surface.
When carrying this monitor, be careful not to damage the panel and
drop it It may cause some trouble.Before carrying the monitor, tum it
off and Unplug the signal cables and the power code From the wall
outlet.
Take the power plug out from the wall
outlet.
Do not pull the cable. It may snap the innerwires and cause overheating and fire. Install this monitor about 50cm far from the eyes and an angle of 0~15 degrees below eyes. Too close installation may cause having weak sight.
Do not press the LCD panel with hands or the sharpened material
hardly.
For cleaning, unplug the monitor from the
Wall outlet. Do net use the liquid cloth. Use the soft cloth.
Do not use the chemical liquid for cleaning. It may cause fading
and breakage.
FCC RF INTERFERENCE STATEMENT
NOTE
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio, TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not
expressly approved by the grantee or manufacturer could void the users
authority to operate such equipment.
DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus set out in the radio interference regulation
of Canadian Department of communications.
INSTALLATION
3-1 Parts
3-2 How to Install
KEY BUTTON
SHORT KEY FUNCTION
| Key Name | Key Function |
|---|---|
| Power ON / OFF | |
| MENU | Open OSD menu window |
| SELECT MODE | Select the item value and the input source |
| Navigate to right menu | |
| Navigate to left menu | |
| Navigate to up menu, “Auto Adjust” in VGA(RGB) input only | |
| Navigate to down menu |
CONNECTION
-
DC12V
DC adapter input -
HDMI
HDMI signal input -
VGA
VGA (PC RGB) signal input -
VIDEO IN / OUT
VIDEO signal input / looping out -
AUDIO (PC)
Stereo audio input for VGA -
AUDIO (VIDEO)
Stereo audio input for VIDEO or S-VIDEO
REMOTE CONTROLLER
SHORT KEY FUNCTION
| Key Name | Key Function |
|---|---|
| POWER | Power ON / OFF |
| AUTO | Excute Auto-Adjustment automatically optimizing the displayed image |
| VOL – | Decrease the volume |
| VOL + | Increase the volume |
| OK | Select the item |
| ▲ | Navigate to up menu on Sub Menu |
| ▼ | Navigate to down menu on Sub Menu |
| ◀ | Navigate to previous menu on Top Menu. Decreases Gauge Value of Sub Menu |
| ▶ | Navigate to next menu on Top Menu. Increases Gauge Value of Sub Menu |
| MENU | Open / Close OSD menu |
| SOURCE | Select the input source |
| MUTE | Sound ON /OFF |
OSD MENU SETTING
4-1 Mode Setting
- Press the SELECT MODE button and then / button to move the source
- Press the button to select the source
- Press the button to exit the Mode Setting menu
Inputs can be set to AV, PC & HDMI mode
AV
Select VIDEO mode
PC
Select VGA(RGB) mode
HDM
Select HDMI mode
4-2 PC Main Menu
- Press the button to access menu
- Press the / button to select the menu
- Press the / button to choose an item
- Press the / button to adjust the setting on a selected item
- Press the button to move the previous menu
4-3 PC Function Menu
- Press the button to access menu
- Press the / button to select the menu
- Press the / button to choose an item
- Press the / button to adjust the setting on a selected item
- Press the button to move the previous menu
4-4 PC OSD Menu
- Press the button to access menu
- Press the / button to select the menu
- Press the / button to choose an item
- Press the / button to adjust the setting on a selected item
- Press the button to move the previous menu
4-5 AV, HDMI Picture Menu
- Press the button to access menu
- Press the / button to select the menu
- Press the / button to choose an item
- Press the / button to adjust the setting on a selected item
- Press the button to move the previous menu
FEATURE
| General Features | 15RCR |
|---|---|
| Display | Screen Size |
| Resolution | 1024*768 pixels |
| Pixel Pitch | 0.297*0.297 mm |
| Brightness | 250 cd/m^2 |
| Contrast Ratio | 500:01:00 |
| Aspect Ratio | 4:03 |
| Viewing Angle (H/V) | 160/160 degrees |
| Display Color | 16.2 million |
| Response Time | 8 ms |
| Video System | NTSC/PAL |
| Panel Life Time (hours) | 50,000 hours |
| Interface | Video In/Out (BNC Type) |
| VGA In (15Pin D-Sub) | 1 |
| HDMI In | 1 |
| Audio In (RCA Type) | 1 |
| PC Stereo In | 1 |
| Audio | Built in Speakers |
| Transmitter | Remote Control |
Special
Features| Multi Display Function| N
Filter Type| 2D Comb Filter
Noise reduction| Y
Auto source sequencing| Y
Multi Lingual Language| Eng
Dimension| Outline Dimension| 18.982.8710.39 inches
Cabinet| Cabinet color| Black
Cabinet Material| Electro-Galvanized Steel
Power| Electrical Ratings| AC 100~240 V (50/60Hz)
DC 12 V
Circumstance| Operating Temperature| 0~60 celsius
Storage Temperature| -20~65 celsius
Mounts| VESA Mounts Size| 100*100 mm
U Factor Height Space| 6U
Ceiling Mount| CMK-01
Wall| WB-5, 10, 30, 31
Rack Mount| Tiltable Rack Mount
2 Year Limited Warranty
All ORION IMAGES products carry a limited warranty from ship date against
defects in materials and workmanship.
ORION IMAGES is not liable for improper installation that results in damage to
mounts, adapters, display equipment or personal injury.
Contact ORION IMAGES & OIC KOREA
In the event of missing and/or damage equipment, or technical questions, the
following information can help in the completion of the installation.
ORION IMAGES Corp. (USA)
Address: 7300 Bolsa Avenue, Westminster, CA 92683
Tel: 714-766-6300 / Fax:
714-766-6310
Email: rma@orionimages.com
Website: http://www.orionimages.com
TROUBLESHOOTING
- When the following troubles are occurred, follow the trouble shooting. Before contacting a service center.
| Troubleshooting | Troubleshooting Tip |
|---|---|
| The screen doesn’t show up | 1. Make sure if the power supply is connected |
property
2. Turn on the power.
3. Select the input signal right for the connected port.
The screen is too light or to dark| Control the BRIGHTNESS
The screen size is not fit for the PC signal| Press the AUTO key among keys in
the front.
(It is used only in the PC signal)
The screen color shows strange in the PC signal| In the FUNCTION menu of OSD
menu, perform the AUTOADJUST.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>