lionelo Sammy Ride On Toy User Manual
- June 16, 2024
- lionelo
Table of Contents
lionelo Sammy Ride On Toy
Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com
Producer:
Brand Line Group Sp. z o. o.
A Kreglewskiego 1, 61-248 Poznan, Poland
WARNINGS
- The bike is designed for children aged 1 to 3 years and weighing up to 25 kg. Warning. Not to be used by children over 36 months due to the permissible weight of the product.
- The bike is designed for one person only.
- Children using the bike should be under adult supervision.
- Keep plastic packaging away from children as they pose a risk of suffocation.
- The bike should be assembled, disassembled and adjusted only by an adult and away from children.
- Protective equipment (helmet, pads) should be worn while using the product.
- The product should be used with caution. Skills enabling the user to avoid falls or collisions causing injury to the user or others are necessary.
- The safest areas for riding a bike are areas with limited or no traffic, such as private recreational areas, playgrounds, and school yards.
- Do not use the bike near traffic.
- Do not use the bike on sloping or uneven surfaces.
- Do not use the bike near potentially dangerous places (e.g. a swimming pool).
- The product should not be used during unfavorable weather conditions (e.g. frost, rain, snow, ice).
- Do not al low a child to stand on the seat or handlebars.
- A child using the bike should wear shoes. The product does not have brakes, so caution should be exercised when using the product.
- Before each use, check for damage, loose connections, or missing parts. Do not use the product if any of its components are missing or if it is damaged. In such a case, contact an authorized manufacturer’s service.
- Do not tow the bike behind a car or other vehicle.
- Keep the product away from heat sources, high temperatures, hot surfaces, sources of sparks, open flames, oil, and sharp edges.
- Store the bike in a dry place.
BATTERY WARNINGS
- Disposable batteries not designed for charging should not be charged.
- Do not insert different types of batteries or new and used batteries into the device.
- Batteries should be inserted with the correct polarity.
- Exhausted batteries should be removed from the toy.
- Do not short-circuit the power terminals.
- If the product is not used for an extended period, remove the batteries from the compartment.
PRODUCT DESCRIPTION (Fig. A)
- Handlebar
- Battery compartment
- Disassembly hole
- Saddle
- Body
- Front fork of the bike
- Front wheels
- Rear wheels
BATTERY INSTALLATION IN THE PRODUCT
-
Use a screwdriver to unscrew the battery cover screw. Remove the battery cover (fig. 1).
-
Insert two AAA 1.5V batteries. Pay special attention to the correct polarity of the batteries (fig. 2).
-
Replace the cover and tighten the screw using a screwdriver (fig. 3).
ASSEMBLY
-
Attach the body to the front fork of the bike (fig. 4) , then insert the handlebar into the appropriate hole (fig. 5).
-
Make sure that the handlebar is inserted correctly and has locked in place, preventing it from being pulled out, and that the wheels are facing forward.
USAGE
- Sit on the saddle, grip both handlebars firmly, and alternate pushing off with your feet.
- After gaining momentum, lift your feet to ride freely.
- To turn, twist the handlebar in the desired direction and balance your body.
- To brake, touch the ground with your feet.
DISASSEMBLY
Using a thin, elongated object (such as a pencil), press the release button ( fig. 6 ), then pull the handlebar up and the front fork of the bike down ( fig. 7 ).
LIGHT EFFECT
The light effect of the handlebar is available after installing the batteries in the battery compartment ( 2, fig. A ). The effect is activated by touching the product.
CLEANING AND MAINTENANCE
- Clean the product regularly from any dirt or debris that may have accumulated during use.
- Use a damp cloth and mild cleaning agents to clean the bike.
- Do not use abrasive or harsh cleaning agents.
- Wipe the product dry before the next use.
The pictures are for illustrative purposes only, the actual appearance of the products may differ from what is shown in the pictures.
Customer Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>