VSYSTO D5M Portable Recorder Instruction Manual
- June 16, 2024
- VSYSTO
Table of Contents
D5M
Portable Recorder
OVERVIEW
Thanks for purchasing this camera.D5M is a professional mini high-definition WiFi camera with built-in WiFi module and supports wireless Internet Agreement.The recording resolution of this camera is 1080P and it can record with dual cameras at the same time; the playback speed and image is smooth and clear. The storage medium uses a compact TF card, which can be played on a computer or HD TV.Pleas keep this user manual carefully. We wish you have a good user experience and enjoy the high quality life!
FEATURES
- Rear Camera:4 -layer glass lens, 150° wide angle
- Front Camera:6 -layer glass lens, 150° wide angle
- TF Card:Support TF card(8G-256G),C10 or above
- Video Format: MOV (H.264)
- Resolution:Front camera(1920×1080/30fps) Rear Camera(1920×1080/25fps)
- Mini size and easy to use
- Synchronous recording: sounds and images are stored in the SD card simultaneously
- Loop Recording: System will overwrite the oldest recorded files automatically.
- Video automatically superimposes the system time, date, etc.
- Wi-Fi Function
SPECIFICATION
| Category | Description |
|---|---|
| Model | D5M |
| CMOS Sensor | G C2053 |
| Lens View Angle | Front camera 150′ :rear camera 150° |
| Video Resolution | Front(1920x1080P.30fps) Rear(1920x1080P:25fps) |
| Video Format | MOV(H.264) |
| Microphone | Built-in |
| Time Watermark | Support |
| Wi Fi | Support |
| Loop Recording | Support |
| TF Card | Support up to 256GB |
| Battery Capacity | 3.7V.3600mAh |
| Battery Working Time | 240minutes |
| Appearance | Mini Size’ Matte Black |
STRUCTURE
OPERATION
Power On
Long press power button for 3 seconds. Red/blue indicator will light
constantly, then blue light will be off, red light will flash slowly, camera
starts recording.
Power Off
Long press power button for 3 seconds. Red/blue indicator light flash slowly
for 3 times, then camera stops recording.
Front Camera Indicator Light
Blue light – Flashes slowly – In charging;
– Steadily lights – Fully Charged.
Redlight -Flashes slowly – Recording;
– Flashes fast – Emergency recording mode;
– Steadily lights – Standby mode(no recording)
※ The camera has built-in G Sensor. If G-Sensor is triggered, camera will
record gmergency video and the video file name will be GSR-XXXX.”GSR”
emergency videos can only be saved up to 10. If there are more than 10, the
earliest emergency video will be deleted.
Rear Camera Indicator Light
Red light -Flashes slowly- In charging;
4 red indicator lights – Steadily lights – Fully charged.
Low Battery Mode
When the battery voltage is low, red/blue indicator light will flash slowly
for 3 times. The camera will then turn off automatically and stop recording.
Type-c Connector
※ There is charging while recording function during the process of charging.
If you don’t want charging while recording during the process of charging, you
can tongpress the power button to turn it off.
※This device can be connected to a computer and used as a USB flash drive.
Emergency Recording Mode
The camera has built-in G-Sensor. If G-Sensor is triggered during recording,
camera will enter emergency recording mode. Red indicator light will flash
fast and the video file name will be GSR-XXXX“GSR” emergency videos can only
be saved up to 10. If there are more than 10, the earliest emergency video
will be deleted.
Video File Name
REC-XXXX— Normal recorded videos
GSR-XXXX— Emergency recorded videos
KEY-XXXX— Emergency recorded videos
※ The recorder will lock the last 20 emergency recorded videos that are not
overwritten by the normal recorded videos. When there are more than 20
emergency video files in the memory card, the earliest emergency video will be
automatically deleted.
Recording Feature
- When the recorder is not connected to an external power supply, press the power button manually. After the recorder is turned on, it will automatically record video.
- If the recorder is connected to an external power supply, it will not automatically record video after the recorder is turned on.You need to manually short press the power button once. The red indicator of the recorder flashes slowly, and the recorder starts recording.
Capture Feature
- When the recorder is not connected to an external power supply, press the power button manually, and short press the power button once after the recorder is turned on.The recorder will directly start recording emergency video and take a photo at the same time. And the red indicator will flash quickly. The video file name is KEY-XXXX. “KEY” emergency videos can only be saved up to 10. If there are more than 10, the earliest emergency video will be deleted.The video file name is KEY-XXXX.
- “KEY” emergency videos can only be saved up to 10. If there are more than 10, the earliest emergency video will be deleted.
Turn on/off WiFi
- When the recorder is not connected to an external power supply, the WiFi function is turned off. If you want to connect to WiFi, you need to wait until the recorder is turned on. Doubleclick the power button, the blue indicator light will be on, WiFi will be turned on. Double-click the power button again, the blue indicator will turn off, and the WiFi will be turned off.
- If the WiFi is turned on, but the APP is not used to connect it, the recorder will automatically turn off the WiFi function after 3 minutes.
- When the recorder is connected to the external power supply, the WiFi is turned on by default. You do not need to double-click the power button to turn on WiFi.
TF Card Slot
- Insert a TF card into the card slot in the right directions until it clicks.
- When removing TF card, please gently press the TF card, then take it out after the TF card is ejected.
- Please take care of the TF card insert direction.If TF card is inserted reversely, both camera and TF card will be damaged.
- If the TF card is not compatible with the camera, please re-insert another TF card and try again.
- Please use a high-speed TF card (CLASS ⑩ and above).
WiFi Function Introduction
Supports mobile APP synchronization time; Preview the recording video in real
time; Playback and delete video files on camera TF card and local video files
on phone; System settings and so on. System settings include loop recording/
formatting card/systemrecovery.
Date and Time Setting
Sync time with mobile APP. First turn on the camera WiFi, after mobile phone
is connected to camera WiFi successfully, then open the APP on mobile
phone,The time of the phone will be automatically synchronized to the camera.
2.4G Wired Controller
- Use a screwdriver to remove the 4 screws at the bottom of the remote control, and then lift off the protective cover.
- Push the coin cell battery out of the side with a screwdriver or fingernail.
- Install the new battery into the battery base according to the positive and negative poles. After ensuring that it can be used normally, close the protective cover and screw back the screws.
Mobile Phone APP Installation and Operation Instructions
The APP is a mobile control software used with VSYSTO camera equipment. This
software connects to the camera device via Wi-Fi, can preview the playback
video directly onthe mobile phone, and easily realize the operation of viewing
the files in the camera on the mobile phone screen and performing settings and
other operations. It subverts the control mode of traditional cameras and
brings youa whole new experience.
Download and Installation
|
---|---
https://itunes.apple.com/cn/app/wi-fi-camera/id1279724157|
https://play.google.com/store/apps/details?id=com.sys.cardvr
Scan the QR code above to download the latest APP from Google Play or APP
Store.Or you can search “WiFi Camera” on Google Play or APP Store to download
and install it.
Connection Steps:
- Turn on the recorder, double-click the power button or short press the blue button of remote control once to turn on WiFi.
- Enter the WiFi setting interface of the phone, find the corresponding WiFi name, and enter the password to connect to WiFi.
- Open the mobile phone APP, connect the recorder.
Conditions of use and product association:
- Smart terminal with Android 5.0 or higher or Apple terminal.
- Purchase a recorder terminal device that uses VSYSTO design scheme, and connect the mobile phone WiFi to the camera correctly
DVR WiFi DefaultName: DV-D5M-XXXX
Default Password: 1234567890
※ To ensure the normal use of APP functions, please update the APP to the
latest version in time.
Synchronize cameratime
When the mobile phone is connected to camera WiFi,open APP and there willbe a
“Command Succeed!” prompt, which indicates that the time of the camera has
been synchronized with the time of the phone (as shown in the figure below)
Live preview(video/photo)
After connect the camera WiFi with mobile phone, open the APP and
click”Connect Device’to enter video preview status.On which you can control
camera to take video or photo. Click to switch to full screen display(as shown
in the figure below) Browse camera files
Click to browse the video files on camera memory card.(as shown in the
figure below)
Playback camera files
Browsing the camera file interface in the “Online” option, click the file you
want to playback.
Download or delete camera files
Browsing the camera file interface in the “Online” option, clickedit to
select the file that you want to download or delete and then click “Save” or
“Delete” below as needed (as shown in the figure below)
Local files management
Click to enter the browsing interface of local files to replay/delete the
files stored in the mobile phone, and the operation is similar to the online
interface 
Camera
Parameter Setting
Click to enter parameter setting interface of the camera to set some
parameters of the camera in the APP.
Among them, you can set the WiFi name and password of the DVR in Setting SSID
(as shown below)
ATTENTION
Solutions for WiFi Connection Problem on Some Mobile Phones:
Android: Firstly turn off your phone’s mobile data and then connect to
DVR’s WiFi. If the prompt “Trust this Network” appears, you must click “YES”,
because Android phone forbids mobile data to ensure the recorded video file
transferring speed from DVR to mobile phone.
1OS: Allows the mobile phone to continue to use the mobile network after
connecting to the recorder via WIFI, but it affects the speed of downloading
the DVR’s video files to the mobile phone.
Troubleshooting
※ What if I forget WiFi password?
Contact customer service for fix firmware.
※ The lens is fuzzy and video is not clear.
Check the appearance of the lens for dirt and dust.
※ The device freezes or does not record.
Please press the reset button of the machine with a sharp needle to reset the
camera.
※ Camera can be turned on, but doesn’t record.
Check whether the TF card is normal, or format it onthe computer, or connected
to the device WiFi and format it on the APP.
If you have a problem that cannot be resolved,please contact us through
message or customer service email
(support01@vsysto.com).
Usage Suggestions
※ Please use 5V2A charger to charge the equipment.
※ It is anormal phenomenon that the device is heated in use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>