VSYSTO K5X-PB Temperature Display Taillight User Manual
- June 14, 2024
- VSYSTO
Table of Contents
**VSYSTO K5X-PB Temperature Display Taillight User Manual
**
Overview
Specifications
| Category | Description |
|---|---|
| Model | K5X-PB |
| Sensor | SONY IMX 335 |
| View Angle | 170° |
| RViedseoolution | 2K(2304×1296) |
| Video Format | MOV(H.264) |
| MicrophoneTim | Built-in |
| Watermark | Support |
| WiFi | rSeuapl-ptoimrtetipmrevsiyenwc,hfirleonpilzaaytbioanc,k/ deletion, |
system settings, etc.
LoopRecording| Support
TF CardB ttery| Support up to 256GB
CPapaciBty nkower a| 1200mAh
Capacity| 2400mAhConnect the power bank to record
TRiemcoerding| continuously for 6 hours
Operation Instruction
Power On
Long press the power button，red/blue light will be on, and the motor will
vibrate for 3 seconds.Then blue light will be on constantly，after motor
vibrate once and blue light start flashing slowly，the DVR starts recording.
Power Off
In the recording status, long press power button,motor will vibrate three
times and red/blue light will flash slowly three times， then DVR will power
off and stop recording.
Power Off For Low Battery
The DVR will power off automatically when the battery is low. The motor will
vibrate three times and red/blue light will flash slowly three times.
Type-c Interface
In the power off/on status,plug in the charger and the DVR will enter charging
mode. Red ligh will flash slowly.After the battery is fully charged, red light
will be on constantly.The DVR can record while charging
Emergency Recording Mode
Press the power button twice in the status of recording,the DVR will enter
emergency recording mode.And the record video file will be named as “GSR-
XXXX”.
Video Naming Differenc
REC-XXXX—Normal Recorded Videos
GSR-XXXX—Emergency Recorded Videos
※The recorder will lock the last 10 emergency recorded videos (GSR-XXXX) that
are not overwritten by the normal recorded videos. If there are more than 10
GSR-XXXX files, it will automatically overwrite the earliest locked emergency
recorded videos
LED Indicator light
Blue light is on constantly–DVR stops recording
Blue light flashes slowly –DVR is recording
Red light flashes slowly–DVR is in charging
Red light is on constantly–DVR is fully charged
Blue light flashes quickly–DVR enters emergency recording mode
TF Card Slot
- Insert the SD card into the card slot in the right direction until it clicks
- When taking out the TF card please press down the TF card gently and the TF card can be taken out after the TF card is ejected.
- Please pay attention to the TF card inserted direction. If it is inserted upside down, the DVR and the TF card may be damaged.
- If the TF card is not compatible with the DVR please insert another TF card and try again.
- Please use high speed SD card（above）
WiFi Function Introduction
Support time synchronization, real-time preview,file playback/deletion,
system settings, etc.System setting includes loop recording, formatting SD
card and system recover.
Time Setting
Mobile phone APP time synchronization Firstly turn on the DVR’s WiFi, after
mobile phone is connected DVR WiFi successfully, open the corresponding APP on
mobile phone, then the time on the phone will be automatically synced to the
DVR
Charging Diagram
Charge
When charging the power bank through the Type-C port, the indicator light
shows the power information as follows
| Battery Level | LED1 | LED2 | LED3 | LED4 |
|---|---|---|---|---|
| 0—25% | ON | OFF | OFF | OFF |
| 25—50% | ON | ON | OFF | OFF |
| 50—75% | ON | ON | ON | OFF |
| 75—100% | ON | ON | ON | ON |
Discharge
When K5 series recorders are connected to the power bank through the Type-C
port for charging, the indicator light shows DVR the power information as
follows
| Battery Level | LED1 | LED2 | LED3 | LED4 |
|---|---|---|---|---|
| 0% | OFF | OFFOFF | OFF | OFF |
| 0—25% | ON | OFF | OFF | |
| 25—50% | ON | ON | OFF | OFF |
| 50—75% | ON | ON | ON | OFF |
| 75—100% | ON | ON | ON | ON |
Product Description
| No. | Definition | No. | Definition |
|---|---|---|---|
| ① | Camera | ② | This side up |
| ③ | Power Button Type-c interface | Ca ④ e cn b | onneTF card slotcted |
to
⑤| com Sptuatteursand usded as a USB flash drive） **
⑥| Indicator Light| ⑦| ** Reset Hole
⑧| Battery indicator| ⑨| Fahrenheit Temperatures display
⑩| The blue light will be always on below 0℃Temperature **
⑪| Sensor| ⑫**| Type-c Interface
Tip
With the advancement of technology, the product structure and parameters
will continue to be improved. If there are pictures or descriptions that do
not match the actual product, please refer to the actual display of the
product.
Mobile APP Installation and Operation Instruction
VSYSTO WiFi APP is a mobile phone control software used with VSYSTO camera equipment. This software is connected to DVR via Wi-Fi to realize functions such as real-time preview, video playback and system settings on mobile phone,which subverts the traditional camera operate method and bring you a new experience.
Download & Installation
Scan the QR code above to download the latest APP from Google Play or APP Store. Or you can search “WiFi Camera” on Google Play or APP Store to download and install it.
Conditions of use and product association:
- Smart terminal with Android 5.0 or higher or Apple terminal.
- Purchase a recorder terminal device that uses VSYSTO design scheme, and connect the mobile phone WiFi to the camera correctly.
DVR WiFi Default Name：K5-XXX
Default password：1234567890
※In order to ensure the normal use of APP functions, please update the APP to
the latest version in time.
ATTENTION
Solutions for WiFi Connection Problem on Some Mobile Phones:
Android: Firstly turn off your phone’s mobile data and then connect to
DVR’s WiFi. If the prompt “Trust this Network” appears, you must click “YES”,
because Android phone forbids mobile data to ensure the recorded video file
transferring speed from DVR to mobile phone.
IOS: Allows the mobile phone to continue to use the mobile network after
connecting to the recorder via WIFI, but it affects the speed of downloading
the DVR’s video files to the mobile phone.
Trouble Shootings
-
What if I forget my password?
Contact customer service for fix firmware. -
The lens is fuzzy and the video is not clear.
Check the exterior of the lens for dirt and dust. -
The device freezes or doesn’t record.
Please push the reset button of the DVR with a sharp needle to reset the DVR. If the DVR can be turned on but does not record, check whether the TF card is normal, or format it on the computer, or connect the DVR to WiFi, and enter the APP to format.
Warm Tips
-
Please use regular 5V 2A charger to charge the DVR.
-
It is a normal phenomenon that DVR heats up during use.
-
This DVR is Ultra HD 2K resolution, it is recommended to use a monitor above 2K to play the video for the best effect.
The DVR can record about 175M video for 1 minute, and a 64GB card can record about 6 hours. -
If the problem is still not solved after troubleshooting, please contact us by follow way: support01@vsysto.com