VSYSTO H10 4CH HD Truck Dash Cam User Manual

VSYSTO H10 4CH HD Truck Dash Cam

This product uses high-performance chips and provides high-definition video and seamless dynamic images. Support true 1080P HD video recording. Please read this manual carefully before use and keep it properly, we hope this product can meet your needs and serve you for a long time!

Note: With the advancement of technology, the product structure and parameters will continue to be improved. If there are pictures or descriptions that do not match the actual product, please refer to the actual display of the product.

Description of Each Part

Button Description

• Function: Open the menu setting interface In standby mode, short press 【Menu】button to open the menu setting interface.
• Function: Switch display screen In the video recording interface, short press【V1/V2】button to switch between the front/rear/left / right display screen.
• Function 1: Page up function Page up function in menu setting and playback mode.
• Function 2: Turn on/off the sound recording function In the video recording mode or standby mode, short press【-】button to turn off the sound recording function. At this time, the microphone on the upper left of the screen turns into a forbidden icon, indicating that the function has been turned off. Short press again to turn on sound recording, and the icon will show as enable sound recording.
• Function 3: Set the time, short press【-】button to increase the time setting.
• Function 1: Turn on/off the video recording function In standby mode, short press 【OK】button to start recording, and short press 【OK】button again to stop recording.
• Function 2: Video file play button. In the file browsing mode, short press【OK】button to play the video.
• Function 3: Confirm button In the setting/playback mode, short press【-】and【+】button to browse, then short press 【OK】 button to confirm.
• Function 1: Page down function Page down function in menu setting and playback mode.
• Function 2: Lock video files In the recording state, short press【+】button to lock the video being recorded.
• Function 3: In standby mode, short press the【+】button to start recording and lock the recorded video.
• Function 4: Set the time, short press【+】button to reduce the time setting.
• Function 1: Power on/off screen function In the power-on state, short press【Power】button to turn off the screen, and short press again to turn on the screen. The camera is still recording video after the screen is turned off, which does not mean that the recorder is turned off.
• Function 2: Turn off the screen, then short-press any button to turn on the screen.

Menu Description

1. After selecting,press to enter the video recording mode;
2. The icon becomes larger to indicate that the function is selected;
3. Character description on the display screen in recording mode:
4. After selecting,press  to enter the playback mode;
5. The icon becomes larger to indicate that the function is selected;
6. Press to select the video file you want to play back

In playback mode: Short press V1/V2 once to switch the playback directory of the front and rear cameras video files

1. Front camera recording file, file name identification: REC_ Current video recording date and time F.MOV
2. Rear camera recording file, file name identification: REC_ Current video recording date and time R.MOV

In playback mode: Short press V1/V2 once to switch the playback directory of the left and right cameras video files

1. Left camera recording file, file name identification: REC_Current video recording date and time L.MOV
2. Right camera recording file, file name identification: REC_Current video recording date and time R.MOV
3. After selecting,press to enter the setting mode;
4. The icon becomes larger to indicate that the function is selected;

information
13. Time Zone Selection| Time zone selection around the world
14. Reset System| Restore factory Settings
15. Firmware Version| Recorder software version

1. After selecting, press to enter format mode;
2. The icon becomes larger to indicate that the function is selected;
3. Delete all files in SD card;
4. After selecting,press to enter the language select mode
5. The icon becomes larger to indicate that the function is selected;
6. Language Identification — Corresponding to the selected language text.
7. The number of language options depends on the actual model.

• The specific functions are subject to the actual situation.

Installation Guide

1. Turn off vehicle engine.
2. Insert the memory card into the card slot of the recorder.
   • Please use a high-speed memory card (Class 10 or above) with a capacity of not less than 8GB, and the memory card 1/card 2 supports a maximum of 512GB.
3. Fix the recorder on the center console of the vehicle.
4. Freely install cameras and handle their cables.
   • Yellow line connection method: The yellow line of the side cameras are connected to the 12V positive pole of the corresponding turn signal, and the yellow line of the rear camera is connected to the 12V positive pole of the reversing light. If the yellow line is not connected, it will not affect the use of the recorder. It’s just that when reversing or turning, the display screen will not automatically switch to the corresponding camera image.
5. Insert the car charger into the vehicle cigarette lighter.

Wireless Remote Control

Battery Replacement Guide

1. Use a screwdriver to remove the 4 screws at the bottom of the remote control, and then lift off the protective cover.
2. Push the coin cell battery out of the side with a screwdriver or fingernail.
3. Install the new battery into the battery base according to the positive and negative poles. After ensuring that it can be used normally, close the protective cover and screw back the screws.

GVP Operation Guide(Optional)

Operating Systems Supported by GVP： WinXP/7/8/10 Installed Version Double- click setup.exe to start the installation. After the installation is complete, the desktop and start menu automatically generate shortcuts.

Double-click the desktop shortcut icon , or click the start menu to select the corresponding option of GVP to open the software.

Green Version

• Double-click to open the software interface icon

Interface Picture Example

When the mouse moves to the corresponding icon, there will be an operation prompt, please follow the prompt to operate (as shown in the figure below)

Interface during Playback
Double-click the playback screen during playback to go full screen or exit full screen;

Supports Multiple Languages and Google Maps Click to set the player language and map

Note: If GV Player cannot be used, you can use DV Player or other software that is compatible with recorded videos.

Product Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>