VSYSTO S2F Motorcycle Dash Camera User Manual

MOTORCYCLE DASH CAM
S2 SERIES USER MANUAL

support-us@vsysto.com
https://www.facebook.com/szvsys
https://www.youtube.com/c/szvsys
Shenzhen V-SYS Technology Co.,Ltd.

Before using the product

This product records videos while the motorcycle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record ALL events. The device may not properly record accidents with small impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the motorcycle’s battery voltage to deviate. Video recording does not begin until the product is completely turned on (booted up). To ensure that all motorcycle events are recorded, wait until the product is completely booted up after turning it on, and then begin operating the motorcycle. VSYS is not responsible for any loss caused by an accident, nor is it responsible for providing any support regarding the outcome of an accident.

During use of the product

Read the following safety information to properly use the product.

• Do not operate the product while driving a motorcycle. Distraction while driving may cause accidents and result in injury or death.
• Do not install the product in a place exposed to flammable gas. Doing so may result in fire or an explosion.
• Do not use the product in a place with high humidity or temperature. It may cause malfunction of the product, explosion, or fire.
• Do not disassemble the product or subject the product to impact. Doing so may damage the product. Unauthorized disassembly of the product voids the product warranty.
• Do not fully submerge the product in water. Doing so may damage the product.
• Do not use the product outside for a prolonged period of time when it is raining. Doing so may cause water damage to the product.
• Do not clean the product with chemicals or detergent. Doing so may damage the product. Clean the product using a clean, soft, dry fabric.
• Ensure that the memory card is in the correct direction before inserting it into the product. The memory card slot or the memory card may be damaged if it is inserted incorrectly.
• Please format cards before use and anytime a significant amount of data has been collected to ensure that the device and SD cards are working properly together. It is recommended to format the TF card at least once a week.
• Use the product at a temperature between -20°C to 65°C. The product may not function as designed and some permanent physical damages may result if it is operated out of the specified temperature ranges. Such damages are not covered by the warranty.
• The product emits electromagnetic radiation that might interfere with medical devices. Consult with your physician and your device manufacturer if you are uncertain whether you can use this device.
• Please use this product to the extent permitted by law.

Packing List

The items may vary for different buying options.

Main unit structure

The product design may change without prior notice.

Connection Diagram

The connection may change without prior notice.  

Menu Setting Description

• Press [OK] button of remote controller to pause recording before setup the system, then long press [OK] button to enter menu system.
  Select the setting options and press the [OK] button to enter Video Mode.

  • Short press ****in video mode to switchdifferent display mode;
  • Long press ****to enter smart gauge mode.
    

Select the setting options and press the [OK] button to enter Playback Mode.

• Short press ****to select the video to playback
• Long press  **** for 3 seconds in the playback mode to switch the video files list between front camera and rear camera.
  

Video file name information: REC_170809-163256F.MOV

“REC” means normal video file
“GSR” means file recorded by triggering G-sensor
“163256” means time 16 o’clock 32 minutes 56seconds
“MOV” means video file format
“KEY” means file recorded by pressing remote
“170809” means date 9th August, 2017
“ F” means front camera video file

NOTE: The recorder will lock the latest 10 emergency recording videos (GSR-XXXX.MOV)triggered by G-sensor and 10 emergency recording videos(KEY- XXXX.MOV) manually triggered by the remote from being overwritten, and after more than 10, the recorder will automatically start to overwrite the earliest locked emergency video.
Select the setting options and press the [OK] button to enter Setting Mode.Select the setting options and press the [OK] button to enter Language Settings.

Menu Setting Description

off
Date format| YYYY MM DD/MM DD YYYY/DD MM YYYY
Clock settings| Set date & time
Time zone select| Time zone selection around the world
Speed stamp| Turn on/off the speed watermark when playback videos on the PC/APP
Unit system| Metric units, Imperial units
R-Cam mirror| Turn on/off the mirror image of the rear camera
GPS Status| Display the current number of satellites, longitude, latitude and other information
Protect Level| Set the sensitivity of the G-Sensor
Beep| Turns the sound on or off for each time a button is pressed.
Voice guide| On/Off
Reset setup| Reset your device to factory settings
Format SD card| Delete all videos from the memory card
WiFi mode| On/Off
Operation Guide| Introduction to the operation of the wired remote
FW version| Check the firmware version

Parking Mode

Impact Mode
(Parking monitoring)| Both front and rear cameras will record 30 seconds when detecting an impact and then turn it off to keep the energy usage to a minimum.| • Menu Settings > Setting Mode > Parking monitoring (On/Off)
• Menu Settings > Setting Mode > Parking sensitivity (High/Stardard/Low)
---|---|---
Preset Mode
(Flameout detection)| Both front and rear cameras will automatically record when the engine is off and then turn it off when reaches the set length of time.| • Menu Settings > Setting Mode > Flameout detection (On/Off)
• Menu Settings > Setting Mode > Movie Off Time (15 min/30 min/1H/2H/3H)
Power Supply| Parking Mode Feature| Power Triggered by
---|---|---
Power Cable| ACC Version| •Impact Mode: Enable
•Preset Mode: Disable| Key Switch
Smart Version| •Impact Mode: Enable
•Preset Mode: Enable| Voltage change / Continuous vibration
USB Cable| •Impact Mode: Disable
•Preset Mode: Disable| Key Switch

Built-in voltage cut-off protection so your motorbike battery will never be drained out. If the power drops below 11.8V the camcorder will automatically shut down.

Wi-Fi Connection

When successfully connected to the camera via built-in Wi-Fi, you can preview and save the recorded videos on your smartphone. You can also change some of the camera settings via the Wi-Fi app.

1. Scan the QR code below to download the latest App from Google Play and App Store. Or you can search ‘Wifi Camera’ on Google Play or App Store to download it.

|
---|---
https://itunes.apple.com/cn/app/wi-fi-camera/id1279724157| https://play.google.com/store/apps/details?id=com.sys.cardvr

2. Select ‘MotoDV_XXX’ from available Wi-Fi network to connect. The default password is ‘1234567890’.
3. Wi-Fi app operation
   The camera will pause recording when you open the Wi-Fi App (successful
   connection) and Enter recorder, or when transferring files. And it will automatically
   start recording after 30 seconds without any operation or 30 seconds after exiting the
   App. In addition, you can manually start/stop recording via the Wi-Fi App.
   Click to stop recording manually.
   Click to start recording manually.
   Click to take photo.
   Click to switch front and rear camera.
   Click to enter/exit full screen view.
   Click   to go back to the previous menu. GPS Playback

1. Navigate to the ‘Online’ tab, click ‘Edit’, and then select the video file you want to download. Press ‘Save’ to download the video files to your device.
2. Navigate to the ‘Local’ tab and select the video you want to play, and the GPS track will be displayed below the playing video.

Wi-Fi Connection Troubleshoot

My WiFi App Doesn’t Connect

1. Make sure the camera is powered on and the correct wifi was connected.

2. Make sure the wifi app has been upgraded to the latest version.
3. For a smooth Wi-Fi connection between your smartphone and VSYS camera, make sure the distance between both is within a range of 3~5 meters (10~16 ft).

When your smartphone connects to the camera, it creates a new WiFi network. In new iOS or Android versions, your camera may stop using that network if it doesn’t detect internet — which your dash cam will not provide.
If prompted “Stay connected to this network without internet?”, just click “Yes” and everything will be OK!
For Android Users:
Before connecting any Android device to the dash cam, it is recommend to turn off the “Smart Network Switch” option in the Wi-Fi settings of the smartphone.
For iPhone Users:
Before connecting your iPhone to the dash cam, it is recommend that the “Wi-Fi Assist” option is turned off .
If the problem still persists, we recommend you to Turn Off cellular data and other internet connections on your mobile phone to fix the issue of your smartphone not connecting to your dash cam.
Why can’t I share videos on social media?
Each video file is too big to share even if you set the clip size to 1 minute. You must edit the video to a maximum of 30 seconds and then share it on social media.
What does GST mean?
GST indicates G-sensor sensitivity levels. Level 0~ Level 4 indicates the sensitivity level from low to high.
What if I forget my wifi password?
Contact the seller to get the reset file if it encounters an error when setting the SSID and password.

Quick Installation Guide

• Please do NOT flush the main unit, lenses, power module, and remote with the high-pressure water gun.
• Do not bend the cable nor twist the connector during installation.
• The main unit and lens cable should be away from the high-voltage circuit like xenon lamp, ignition plug etc.
• If your motorcycle is a traditional carburetor system please try to change a suitable R-value ignition plug when you meet the interference phenomenon.

Quick Test

1. Connect cam 1 & cam 2 to the main unit.
2. Find the USB test cable and connecting to the power bank or USB adaptor to do a quick test before installation.
3. Prepare installation if everything looks good.

The connection should follow  the same color and the correctarrow direction. The input voltage never exceeds 5V and the current needs to be 2A or above for the USB power source to make sure the dash cam works properly.

Camera Installation

Screw Nut: Just screw the nut when the cable connected but not twist the cable or the connector

Power Module Installation

ACC Version:
Connect red wire to the battery positive terminal, black wire to the negative terminal, and yellow wire to the 12V port controlled by key ignition (ACC wires). The dash cam will automatically turn on and off with your bike ignition.
Smart Version:
If you do not want to connect the yellow wire, then leave the yellow wire aside without installing it, at which point the power cord will work on a smart power cord principle.
How does the smart power cord work?
No need to connect to the ACC wires. It works by detecting the voltage change and continuous vibration.

• Make sure the power module is installed in a place that can detect the bike vibration.
• The dash cam automatically powers on when the engine is started. It won’t work if only the ignition switch is turned on.
• The dash cam will continue to record for approximately 5 minutes after the motorcycle is turned off, and then shut down.

Wired Remote

Smart Gauge Mode

Long press in video mode to enter Smart Gauge Mode, and then short press to switch different display information.
If you want to quit Smart Gauge Mode, just long-press the button.

1. Current voltage
2. Battery voltage after 1 hour of flameout
3. Battery voltage after 1min of flameout
4. Single driving time
5. Average speed of single driving
6. Altitude
7. Longitude
8. Latitude
9. Atmospheric pressure

GPS Module Installation

Fix the GPS module to a proper place on your motorcycle with the double-sided foam tape. Please note the “GPS” icon must face the sky directly without any barrier, in case of the signal is shielded.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>