VSYSTO MS03 Motorcycle Headlight Waterproof LED Driving Auxiliary Light User Manual
- June 15, 2024
- VSYSTO
Table of Contents
VSYSTO MS03 Motorcycle Headlight Waterproof LED Driving Auxiliary Light
User Manual
Attention
- Never connect to an unwatchable power adapter nor bend the power cable too hard in case of a short circuit.
- Never disassemble nor attempt repair of this product. Doing so may damage the machine, cause electronic shock, and void your product warranty.
- Due to software upgrades, resulting in some of the interface and functions and specifications are subject to change without prior notice.
Connection
Power Cable
- Connect the red power cable to the positive terminal (+) of the battery and the black cable to the negative (-) terminal of the battery.
- Once the power cable is correctly connected, turn on the motorcycle power, the power cable will display the current voltage of the motorcycle’s battery.
Turn on/off Spotlights Power
Long press the red button of the remote control for 5 seconds to turn on or off the spotlights power.
Operation Method
- After starting the motorcycle, the current motorcycle voltage will be displayed on the black box of the power cable, and the red indicator light of the remote control will always be on. Long press the red button of the remote control for 3 seconds, and theb spotlight will be on. The light source is white. Short press the blue button once, and the light source is yellow. Short press the blue button again, and the light source will be yellow light and white light. Short press the blue button again to enter the quickly flash state.
- When the spotlight is on, long press the red button for 3 seconds to turn off the spotlight. After turning off the spotlight, if you want to turn on the spotlight again, you need to wait 10 seconds. Then long press the red button for 3 seconds, and the spotlight will turn on.
- When the spotlight is on, short press the red button to quickly enter the flash state. Shotr press the red button again to exit the flash state.
Wired Remote
Specs
Specs | High beam, Low beam, Flash |
---|---|
Power | 20W(10w/pcs |
Voltage | DC 12-24V |
Lumen | 2000LM / White; 1500LM / Yellow |
Illumination | 1500LUX/White; 1000LUX / Yellow |
Color | 6000K/White; 3000K / Yellow |
Waterproof | IP68 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>