nVent CADDY HMZG470 Hangermate Vertical Mount Screw Owner’s Manual

: June 16, 2024
: nVent Caddy

Table of Contents

nVent CADDY HMZG470 Hangermate Vertical Mount Screw
Product Information
Product Usage Instructions
FEATURES
PRODUCT ATTRIBUTES
DIAGRAMS
WARNING
Contact Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nVent CADDY HMZG470 Hangermate Vertical Mount Screw

nVent-CADDY-HMZG470-Hangermate-Vertical-Mount-Screw-
product

Product Information

Specifications

Catalog Number: HMZG470
Features:
- Convenient design allows fast and easy installation
- Eliminates the need for labor-intensive operations, such as pre-punching or drilling of steel components
- Only one driver needed for all anchor sizes
- Tapped head permits in-line mounting of threaded rod systems

Product Usage Instructions

To ensure proper usage of the HMZG470, please follow the instructions below:

Step 1: Preparing the Installation Area
Before installing the HMZG470, make sure the installation area is clean and free from any debris or obstructions.

Step 2: Positioning the Anchor
Select the desired location for the anchor and mark the drilling points on the surface. Ensure that the anchor will be securely fastened.

Step 3: Drilling Holes
Using an appropriate drill bit, drill holes at the marked points on the surface. The size and depth of the holes should match the specifications provided in the product instruction sheet.

Step 4: Installing the HMZG470
Insert the HMZG470 into the drilled holes, ensuring a tight fit. Use a hammer or appropriate tool to secure the anchor in place.

Step 5: Mounting Threaded Rod Systems
If you intend to mount threaded rod systems, align the tapped head of the HMZG470 with the rod and secure it in place using the appropriate fasteners.

Step 6: Final Check
Double-check the installation to ensure that the HMZG470 is securely fastened and aligned correctly.

FAQ

Q: Where can I find the product instruction sheets?
A: The product instruction sheets are available at www.nvent.com and from your nVent customer service representative.
Q: What should I do if I encounter product malfunction or property damage?
A: If you encounter any issues or damages, please refer to the product instruction sheets for troubleshooting steps. If the problem persists, contact nVent customer service for further assistance.
Q: Can I use the HMZG470 for applications other than mounting threaded rod systems?
A: While the HMZG470 is primarily designed for mounting threaded rod systems, it may also be suitable for other applications. Please refer to the product instruction sheets for additional usage guidelines.
Q: Can I use the HMZG470 without pre-punching or drilling steel components?
A: Yes, the HMZG470 eliminates the need for labor-intensive operations such as pre-punching or drilling of steel components, making installation faster and easier.

CATALOG NUMBER
HMZG470

FEATURES

Convenient design allows fast and easy installation
Eliminates the need for labor-intensive operations, such as pre-punching or drilling of steel components
Only one driver needed for all anchor sizes
Tapped head permits in-line mounting of threaded rod systems

PRODUCT ATTRIBUTES

Material: Steel
Finish: Electrogalvanized
Rod Size: 3/8″
Flange Thickness: 0.0600″ – 0.2500″
Screw Diameter: 1/4″
Screw Length: 1″

DIAGRAMS

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.