V7T Truck Dash Cam

Specifications

• Model: V7T
• Screen Size: 7 inch (1024×600)
• Video Resolution: 1920*1080P
• Video Format: MOV (H.264)
• Loop Recording: Support
• SD Card: Supports 16G-256G memory cards
• G-sensor: Yes
• Speaker: Yes
• Microphone: Yes
• Working Voltage: N/A

Product Usage Instructions

Safety Instructions

In order to use this product safely, please confirm that you
fully understand the following:

• WARNING: This section indicates that
  mishandling can have serious consequences.

• Note: This section indicates that improper
  handling may cause injury to the user or damage the product.

Prohibit

• Please use this product under the premise of obeying traffic
  rules.

• Do not install the device in a position that blocks the view or
  obstructs driving.

• Do not disassemble or modify this product by yourself.

• Do not use accessories not included.

• Do not allow water to enter this product.

ATTENTION

• If the product makes an abnormal noise or smell, please stop
  using it immediately.

• The waterproof rating of the camera is IP67, and the host is
  not waterproof.

• When disposing of this product, please follow the
  classification principle and do not discard it at will.

• Do not store this product in a high temperature and humid
  environment.

Features

• Replace conventional lithium batteries with super capacitors
  for longer life and safer.

• HD display screen.

• Support reversing auxiliary line.

• Support battery voltage display.

• Video can be recorded after inserting Micro SD card.

• Built-in WiFi, can view real-time video on the dedicated
  APP.

Description of Each Part

1. Up Button
2. OK Button
3. Down Button
4. Card Slot
5. Reset Button
6. Microphone
7. Power Connector
8. GPS Connector
9. Camera Connector
10. Camera Connector
11. Power Cable
12. GPS Module
13. Camera
14. Camera

Micro SD Card

Please use the high-quality Class10 or above genuine SD
card.

The recorder supports 16G-256G memory card.

1. If the memory card cannot save the file properly, please format
   it on the recorder. Formatting will delete the data, please backup
   the card data before performing formatting.

2. Insert the card into the card slot as shown in the
   picture.

3. When picking up the card, gently press the SD card and slowly
   release it after hearing Da.

4. Please pay attention to the direction of the gold finger on the
   SD card. If it is inserted reversely, the SD card and recorder will
   be damaged.

Attention:

1. The card used on other devices will be automatically formatted
   after being inserted into our DVR. Please back up the data.

2. In the case of high frequency of use, it is recommended to
   format the memory card every two weeks.

3. Please do not pull out the card in the recording state to avoid
   damaging the video file and recorder.

FAQ

1. 1. Q: What SD card should I use with the V7T Truck Dash Cam?

A: It is recommended to use a high-quality Class10 or above
genuine SD card with a capacity between 16G and 256G.

1. 1. Q: Can I install the dash cam in any position?

A: No, please do not install the device in a position that
blocks the view or obstructs driving.

1. 1. Q: Is the V7T dash cam waterproof?

A: The camera has a waterproof rating of IP67, but the host is
not waterproof.

1. 1. Q: Can I disassemble or modify the product by myself?

A: No, please do not disassemble or modify the product by
yourself as it may cause damage or void the warranty.

1. 1. Q: How often should I format the memory card?

A: It is recommended to format the memory card every two weeks,
especially with high frequency of use.

V7T Truck Dash Cam
User Manual
Thank you very much for purchasing the VSYSTO V7T dash cam. Please read this manual carefully before use. – 1 –

Safety Instructions
In order to use this product safely, please confirm that you fully understand the following. WARNING: This section indicates that mishandling can have serious consequences. Note: This section indicates that improper handling may cause injury to the user or damage the product.

Prohibit

Obey

WARNING
Please use this product under the premise of obeying traffic rules. Do not install the device in a position that blocks the view or obstructs driving. Do not disassemble or modify this product by yourself. Do not use accessories not included. Do not allow water to enter this product.

ATTENTION
If the product makes an abnormal noise or smell,please stop using it immediately.
The waterproof rating of the camera is IP67, and the host is not waterproof. When disposing of this product, please follow the classification principle and do not discard it at will. Do not store this product in a high temperature and humid environment.

– 2 –

Features
Replace conventional lithium batteries with super capacitors for longer life and safer. 1.HD display screen. 2.Support reversing auxiliary line. 3.Support battery voltage display. 4.Video can be recorded after inserting Micro SD card. 5.Built-in WiFi, can view real-time video on the dedicated APP.
Standard Accessories

Host

Front Camera

Rear Camera

RemoteControl

GPSModule

3.5m

UserManual

Power Cable
If there is any change of specification and appearance due to improvement, we are not able to inform you in advance. Please understand. Please note that there are differences between the schematic diagram and the real object in the manual.

– 3 –

Description of Each Part

5

1

2

3

4 6

78

9 10

11

12 13
14
1 Up Button 2 OK Button 3 Down Button 4 Card Slot 5 Reset Button 6 Microphone 7 Power Connector

8 GPS Connector 9 Camera Connector 10 Camera Connector 11 Power Cable 12 GPS Module 13 Camera 14 Camera
– 4 –

Micro SD Card
1.Please use the high-quality Class10 or above genuine SD card. 2.The recorder supports 16G-256G memory card. 3.If the memory card cannot save the file properly, please format it on the recorder. Formatting will delete the data, please backup the card data before performing formatting.

1. Insert the card into the card slot as shown in the picture. 2.When picking up the card, gently press the SD card and slowly release it after hearing “Da”. 3.Please pay attention to the direction of the gold finger on the SD card. If it is inserted reversely, the SD card and recorder will be damaged.
Attention: 1.The card used on other devices will be automatically formatted after being inserted into our DVR. Please back up the data. 2.In the case of high frequency of use, it is recommended to format the memory card every two weeks. 3.Please do not pull out the card in the recording state to avoid damaging the video file and recorder.

Specifications

Model

V7T

Screen Size

7 lnch(1024×600)

Video Resolution Video Format Loop Recording

1920*1080P MOV(H.264)
Support

SD Card G-sensor Speaker Microphone Working Voltage

Support up to 256GB
Built-in
Built-in
Built-in
DC 5V-2A

– 5 –

Installation Guide

Please connect the yellow wire on the rear camera to the 12V positive pole of the inverted light. When the vehicle is in reverse gear, the rear camera screen will be displayed in full screen on the main unit of the recorder, with a reversing auxiliary line. It is convenient for users to observe the surrounding environment when reversing.

Rear Camera

Host

Front Camera

– 6 –

Host Fixed Installation Diagram
Host Fixed Installation Diagram: 1. Hang it on the windshield. 2. Stand on the center console. Note: You can choose to rotate 180° to adjust the screen interface in the host menu.
– 7 –

Power on After installing the recorder and inserting the SD card, insert the charger into the cigarette lighter. Start the car to start recording automatically.
Attention This recorder uses the latest supercapacitor design to replace the traditional lithium battery design, supercapacitor will automatically charge and can save the last file after disconnecting the power.
Time Setting Pause recording after the recorder is turned onEnter MenuChoose time settingPressto adjust timePress ok to save the settings
Manually Trigger Lock Video In the recording state, long press the up button, the recorder will enter the emergency lock mode, record a locked video and the front and rear cameras capture a picture at the same time. The video file name is named after KEY-XXXXX. The locked video will not be overwritten by the normal recorded “REC-XXXXX” file. When the SD card video file exceeds 10 KEY- XXXXX videos, the system will delete the earliest KEYXXXXX emergency video. G-sensor trigger lock video In the recording state, if the G-sensor sensitivity is turned on, the video will be locked after the G-sensor is triggered by a collision and reaches the system preset level. And the locked video will not be overwritten by the normal recorded “REC-XXXXX”. The name of the locked video file is GSR-XXXXX. When the SD card video file exceeds 10 GSR-XXXXX videos,the system will delete the earliest emergency video of GSRXXXXX. Recording Mode Please format the SD card before inserting it. After inserting the SD card, turn on the power of the motorcycle, and the recorder starts to enter the normal loop recording mode. You can set 1/2/3/5 minutes to save a video in the menu. When the SD card is full, new video files will overwrite the oldest saved files. To prevent loss of important files, please backup important video files in time.
Playback Video Mode In the recording state of the recorder, short press the OK button to pause the recording. Then long press the OK button, the recorder enters the system setting interface, use the up/down button to select the video to be played, and then short press the OK button to enter the playback mode. In playback mode, long press the up button to switch to view the video files saved by the front and rear cameras. If you need to exit the playback mode, long press the OK button to return to the system setting interface. Then use the up/down button to select the recording icon, and then short press the OK button again to successfully return to the recording mode.
– 8 –

Screen Information and Menu Descriptions

1.After selecting, press OK to enter recording mode.

Description of characters on the display in recording mode:

2.The icon becomes larger to indicate that thefunction

Date&Time Video time

Recording icon

has been selected.

GPS

Microphone

2022/09/09 15:12:01 00:00:26

REC

Parking GPS

Monitoring

Countdown P

Altitude
50M 1007HPA

Atmospheric pressure

WiFi

Lock video

Front

Front

Camera

14.11v

0

When parking is detected, the

– +

mi/h

Rear Rear Camera

recorder will turn off after the

progress bar is complete, which Voltage takes about 5 minutes

Speed

1.After selecting, press OK to enter playback mode. 2.The icon becomes larger to indicate that the function has been selected.

1. Press to select the video to playback “F/” indicates rear camera video playback
F/REC_220909-151201-001838F.MOV

1 1

2022/09/09 15:12:01

[00:00:26]

In playback mode, long press for 3 seconds to switch to view the list of video files saved by the front and rear cameras

Front camera video files name identification: REC_ The year, month and time of current video F.MOV

“R/” indicates rear camera video playback

Reversing auxiliary line

R/REC_220909-151201-001838R.MOV

1 1

2022/09/09 15:12:01

[00:00:26]

Rear camera video files name identification: REC_ The year, month and time of current video R.MOV

– 9 –

1.After selecting, press OK to enter setting mode. 2.The icon becomes larger to indicate that the function has been selected.
Note:”Flameout Detection “, “Parking Monitoring” “Parking Monitoring Sensitivity “, and ”Timed Recording after Flameout ” functions are optional and require the purchase of an additional power cable to have them. If you need these three functions, please contact us through the Amazon message system or customer service email.

1.Video clip time 2.Sound record 3.MIC sensitivity
4.Flameout Detection
5.Parking Monitoring 6.Parking Monitoring Sensitivity 7.Timed Recording after Flameout 8.Flip Screen 9.Date watermark 10.Unit system 11.Button sound 12.Clock setting 13.Date format
14.Speed watermark
15.Auto screen off 16.Protection Level 17.GPS Status 18.Time zone selection 19.System reset 20.WiFi MODE 21.Format SD card 22.FW version

1/2/3/5 minutes can be selected Set whether the recorded video needs sound Set the sound level of MIC On:After detecting that the vehicle is turned off, the recorder shutdown after waiting for about 10seconds; off: After 5 minutes without vibration, the recorder shutdown Set whether to turn on or off parking monitoring function
Set the sensitivity of parking monitoring
Set the time to keep recording after the vehicle is turned off
Whether the recorder display needs to be flipped at 0°/180° Whether recording video needs date watermark Set the speed unit displayed when driving Set the button sound on or off Set display time Three format options: YYYY MM DD/MM DD YY/DD MM YYYY Whether it is necessary to turn on the driving speed display when playing videos on the computer Set the display screen backlight to be off, or off after 1min/3min G-Sensor sensitivity level adjustment Display the current number of satellites, longitude, latitude, etc. Time zone selection around the world Restore to the factory default settings On/Off Delete all videos from the memory card Information about the current software version of the recorder

1.After selecting, press OK to enter language selection mode. 2.The icon becomes larger to indicate that the function has been selected.
1.Language identification — corresponding to the selected language. 2.The number of language options depends on the actual model. The specific functions are subject to the actual product received.

-10-

Mobile Phone APP Installation and Operation
WiFi APP is a mobile phone control software used with VSYSTO DVR device.This software is connected to the DVR device via Wi-Fi, it can directly preview and playback the video on the mobile phone,easily realize that viewing the camera documents on the screen of mobile phone,setting or other operations. Subverting the control method of traditional cameras,bring you a new experience.

App download for Android user

App download for Apple user

Scan the QR code above to download the latest APP from Google Play and APP Store. Or you can search “WiFi Camera”on Google Play or APP Store to download and install it.Conditions of use and product association: 1.Smart terminal with Android 5.0 or higher or Apple terminal. 2.Purchase are cord erterminal device that uses VSYSTO design scheme, and connect the mobile phone WiFi to the camera correctly. DVR WiFi Default Name: DV-V7T-XXXX Default password: 1234567890 To ensure the normal use of APP functions, please update the APP to the latest version in time.

Synchronized Recorder Time
After the mobile phone is connected to the WiFi of the recorder, open the APP. When it prompts “command successful”, it means that the time of the recorder and the time of the mobile phone have been synchronized with the mobile phone (as shown in the figure below).

2022/09/09 15:12:01

REC

OKB/S

2022/09/09 15:12:01 VSYSTO V7T OKPH
-11-

Live Preview (Video / Photo)
After connect the camera WiFi with mobile phone, open the APP and click “Connect Device” to enter video preview status. In video preview state you can control camera to take video or photo.Click to swtich front/rear image.Click to full screen display(as shown in the figure below).

2022/09/09 15:12:01

REC

OKB/S

2022/09/09 15:12:01 VSYSTO V7T OKPH

Browse Recorder Files
Click Online browse the video files on recorder memory card(as shown in the figure below).

Playback Recrder Files

Browsing the recorder file interface in the “Online” option, click the file you want to

playback.Click the upper left corner

to switch the front/rear camera file, F

means the front camera,R means the rear camera.

-12-

Download or Delete Recorder Files
In the “Online” browsing recorder file interface, click EDIT to select the file you want to download or delete, and then click “Save” or “Delete” below as needed (as shown in the figure below). Video File Name REC-XXXX– Normal recorded videos GSR-XXXX– Emergency recorded videos The recorder will lock the last 10 emergency recorded videos (GSR-XXXX) that are not overwritten by the normal recorded videos. If there are more than 10 GSRXXXX files, it will automatically overwrite the earliest locked emergency recorded videos.
Local Files Management
Click Local to enter the browsing interface of local files to replay/delete the files stored in the mobile phone, and the operation is similar to the online interface.
-13-

Recorder Parameter Setting
Click Setting to enter the recorder parameter setting interface, and you can set some parameters of the recorder in the mobile APP. Set SSID is the WiFi name and password for setting the recorder (as shown in the picture below).
If you need to view the video track, you can save the downloaded video in the Local of APP. Then switch the phone to a network that can access the Internet, click to play the video, and the track of your driving will be displayed below the video. The default map of the APP is Baidu Map. If you need Google Map, please change Baidu Map to Google Map in the APP settings interface. When you play a video on the mobile APP to view the driving track, you can only view the video of a single camera (front/rear), and cannot play multiple cameras at the same time.
2022/09/09 15:12:01 V7T 22Kmh
-14-

WireleResmoste Rem Control ote Control
1. Short press the red button once to switch to the full screen of the rear camera.
1. Short press the blue button once to switch the full screen of the front camera. 2. Double-clicking either of the two buttons will trigger emergency lock mode. The front and rear cameras start recording emergency video, while capturing a picture. While recording an emergency video, double-clicking the button again cannot trigger lock mode repeatedly. Only when the last emergency video recording is completed, double-clicking again can trigger. The video file name is named after KEY-XXXXX. The locked video will not be overwritten by the normal recorded “REC-XXXXX” file. When the SD card video file exceeds 10 KEY-XXXXX videos, the system will delete the earliest KEY- XXXXX emergency video.
Battery Replacement Guide
Model:CR2032

Use a screwdriver to
remove the 4 screws at the bottom of the remote control, and then lift off the protective cover.

Push the coin cell
battery out of the side with a screwdriver or fingernail.

Install the new battery into the
battery base according to the positive and negative poles.After ensuring that it can be used normally that it can be used normally,close the protective cover and screw back the screws.

GVP Operation Guide (Optional)
Operating Systems Supported by GVPWinXP/7/8/10 Installed Version Double- clicksetup.exe to start the installation. After the installation is complete,the desktop and start menu automatically generate shortcuts.

Double-click the desktop shortcut icon , or click the start menu to select the

corresponding option of GVP

to open the software.

Green Version

Double-click to open the software interface icon

-15-

Interface Picture Example
Initial Interface When the mouse moves to the corresponding icon,there will be an operation prompt, please follow the prompt to operate (as shown in the figure below).
Interface during Playback During playback, double-click the front camera or rear camera image, the full screen of the camera will be displayed. Double- click again to exit full screen.
Playback Interface Supports Multiple Languages and Google Maps Click to set the player language and map
Note: If GV Player cannot be used, you can use DV Player or other software that is compatible with recorded videos. -16-

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>