hama 00054412 4 Way Charging Station for PS4 Instruction Manual
- June 4, 2024
- Hama
Table of Contents
hama 00054412 4 Way Charging Station for PS4
Operating instruction
Controls and Displays
- Charging cradle for PS4 controller 1
- Charging cradle for PS Move controller 1
- Charging cradle for PS4 controller 2
- Charging cradle for PS Move controller 2
- Type-A USB connector
- Micro-USB plug
- Micro-USB port
Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- 1x Charging station “Quadrocharger”
- 1 x USB Y cable
- These operating instructions
Safety Notes
- The product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- Lay all cables so that they do not pose a tripping hazard.
- Do not bend or crush the cable.
- Do not drop the product and do not expose it to any major shocks.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Children are not permitted to play with the device. Children may not clean the product or perform user maintenance without supervision.
- Dispose of packaging material immediately according to locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
Warning – Charging station
- Do not continue to operate the device if it becomes visibly damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Note
- The product may be operated only with the supplied Micro-USB Y cable.
- Use the four charging cradles only for charging original Sony DualShock 4 controllers and PS Move controllers.
- Remove a controller from the charging station once it is fully charged.
- Take care when plugging in the controllers to line up the plugs and sockets neatly to avoid causing damage or wear.
Getting Started and Operation
Connecting the charging station and terminal devices
- First connect the Micro-USB plug (F) to the Micro-USB port on the charging station.
- Connect the two type-A USB connectors to the two free USB ports on your PS4.
- Place your Sony DualShock 4 / PS Move controller(s) onto the charging cradle(s) (A/B/C/D) of the charging station.
- The LED bar of the controller lights up during charging. The light reflects from the charging cradle, and is most easily visible in a dim environment.
- 1.8 amperes can only be achieved if both USB 2.0 plugs have been connected to a USB socket.
Note
If the power draw of all the connected devices exceeds the maximum performance (see section 7.) of the charging station, the connected devices may charge more slowly or even not charge at all.
Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Service and Support
Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-115 (German/English) Further support information can be found here: www.hama.com
Technical Specifications
Charging station “Quadrocharger”
- Charging station
- IN / OUT: 5.0 V max. 1.8 A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>