allen roth FSI 1932 MBLK 2 Pack Matte Black Steel Single Curtain Rod Bracket Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 1932 MBLK 2 Pack Matte Black Steel Single Curtain Rod
Bracket
Product Information
- Brand: ALLEN+ROTH
- Trademark: ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC
- Model: FSI 1932 MBLK
Package Contents:
- 2-CT BIRD BRACKET SET (A, B)
- Stud/Montante (3B)
Hardware Contents:
- Drywall/Panel de yeso (AA)
- Screws (CC)
- Screw (DD)
- Wrench (EE)
Estimated Assembly Time: 10 minutes
Country of Origin: China
Product Usage Instructions
- Using bracket A as a guide, adjust it to the desired height and mark the location on the wall for mounting screws.
- Center the metal plate CC vertically in the outline of posts on bracket B.
- Insert screw DD underneath bracket B using the provided wrench EE.
- Repeat steps 1 to 3 for additional brackets. Use a level if necessary.
- Slide the drapery rod (not included) into the bracket A and tighten the set screw to lock the rod into place.
Thank you for purchasing this Allen + Roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search for the item number, and refer
to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You can also contact us at
ascs@lowes.com.
**PREPARATION
**
Before beginning assembly of the product, make sure all parts are present.
Compare parts with the package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Antes de comenzar a ensamblar el producto, asegúrese de tener todas las
piezas. Compare las piezas con la lista del contenido del paquete y la lista
de aditamentos. No intente ensamblar el producto si falta alguna pieza o si
estas están dañadas.
TOOLS REQUIRED (NOT INCLUDED)
Estimated Assembly Time: 10 minutes
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using the bracket as a guide, adjust to the desired height and mark the location on the wall for mounting screws.
-
Center the metal plate (CC) vertically in the outline of posts on brackets (A). Mark the location of holes
-
If mounting into a stud, fasten the metal plate (CC) to the wall with mounting screws
If mounting into drywall, drill the holes on the wall with 3/16 in. bit (not included), position plastic anchors, and drive into the wall using a Phillips screwdriver (not included). Fasten the metal plate (CC) into the wall with mounting screws. -
Insert screw (DD) underneath the bracket using the provided wrench (EE).
-
Slide the drapery rod (not included) into the bracket and tighten the set screw to lock the rod into place
-
Repeat steps 1 to 4 for additional brackets. Use level (not included) if necessary.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents, or polishes as they may damage the finish.
FEELING CONFIDENT?
START YOUR NEXT PROJECT
Visit lowes.com for more information.
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC.
All rights reserved.
Printed in China