inateck BCST-42 Wireless Barcode Scanner User Guide

inateck BCST-42 Wireless Barcode Scanner

This is a brief version of the scanner instruction manual. Please feel free to contact us if you have any trouble configuring the barcode scanner such as adding/deleting a prefix/suffix. We are always at your service.

. Quick Start

How to Press the Buttons for Quick Function Switch
(For more functions, please read through the manual completely.)

1. How to Enter Bluetooth/ Wireless Adapter Pairing Mode.

   • Long press the pairing/multi-functional button and the middle indicator will flash when the scanner enters pairing mode.
     Note

   • The scanner is in wireless adapter mode by default. If Bluetooth connection is preferred, please refer to Item 4 to quickly switch to Bluetooth mode.

   • If the scanner doesn’t appear as an available device after entering Bluetooth pairing mode, please delete all the pairing record and retry.

2. How to Check Battery Status Quickly.

   • Short press the pairing/multi-functional button to check the battery level according to the three LED indicators on the scanner. When the battery level drains to below 30% with a yellow LED, please recharge the barcode scanner.

3. How to Switch Between Inventory Mode and Normal Mode.

   • Long press the scan button ‘ and the pairing/multi-functional button simultaneously to switch between inventory mode and normal mode.

4. How to Switch Between Wireless Adapter Mode and Bluetooth Mode.

   • Toggle the switch to ON and hold the scan button’ for 5s to switch between wireless adapter mode and Bluetooth mode.

Frequently Used Barcodes

Note

• Function Setting Steps : “Enter Setup” -“e.g. Low Volume” – “Save and Exit”
• Those marked with (*) in the manual indicate default settings.

Use of the Scanner

Connection
*() Wireless Adapter Mode**
Wireless adapter mode is the default mode. Once the wireless adapter is plugged into the USB port of a computer, the scanner will be paired with the adapter automatically.

Note
If the scanner has any trouble pairing with the adapter, please scan the command barcodes in sequence to reconnect the scanner to the adapter: “Enter Setup”-“Wireless Adapter Mode”-“Save and Exit”

Wired Mode
Connect the scanner to a device via the USB cable and priority will be given to the USB cable to transmit data.

Bluetooth Mode(HID)
To enter this mode, please scan the command barcodes in sequence: “Enter Setup” -­”Bluetooth Pairing(HID Mode)”-“Save and Exit”

Charging
Connect the scanner to a computer/charger directly via the included USB cable to charge it.

Note : Warning: Do NOT charge the scanner with a fast charger.

Setting

System Setting

Inventory Mode
Users may use the inventory mode to keep the scanned barcodes in the cache of the scanner and upload them to a computer in batches. In inventory mode users are not restricted to the time or location when uploading data. In addition, historical data can be cleared in the cache More details about inventory mode are as below.

Note
It is not necessary to scan “Enter Setup “or” Save and Exit” when scanning the 5 barcodes i below. Simply scan the barcodes to activate the functions.

Status Indicator

Check Battery Status
Short press the pairing/multi-functional button CII0 to check the battery level according to the LED indicators.

LED Indication

Product Specification

Packing List

• Scanner* 1
• USB Cable• 1
• User Guide 1 Wireless Adapter 1

FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

• The device has been evaluated to meet general RF exposure requirement.
• This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s} must not be co-located or conjunction with any other antenna or transmitter.

EU/UK Declaration of Conformity
lnateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU and SI 2017 No. 1206.
A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/euro-compliance.

Service Center

Europe

• F&M Technology GmbH
• Tel: +49 341 51998410 (Working daySAM-4 PM CET)
• Fax:+49 341 51998413
• Address: Fraunhoferstraf3e 7, 04178 Leipzig, Deutschland

North America

• lnateck Technology Inc.
• Tel: +1 (909) 698 7018 (Working day9 AM-5 PM PST)
• Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA

F &M Technology GmbH

• Fraunhoferstraße 7, 04178 Leipzig, Deutschland
• Tel: +49 341 5199 8410 I

nateck Technology (UK) Ltd.

• 95 High Street, Office B, Great Missenden, United Kingdom, HP 16 OAL
• Tel: +44 20 3239 9869

Manufacturer

• Shenzhen Licheng Technology Co., Ltd.
• Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>