Super Bright LEDs HSL2 Series LED Hardscape Light User Manual
- June 15, 2024
- super bright leds
Table of Contents
Super Bright LEDs HSL2 Series LED Hardscape Light
Important: Read all instructions prior to installation. HSL2 Series
Safety and Notes
- For use with outdoor, low-voltage landscape lighting systems only.
- Not for use with submersible or pool/spa equipment.
- Do not submerge in water, the product can be damaged.
Installation Instructions
- Turn off supply power.
- Lay out fixtures as they will be installed.
- Run landscape wire (WP14-2DB or WP12-2DB) from power supply past each light. Wire must be within a few inches of mounting location to allow power connections to be made.
- Install light, concealing and protecting wiring.
When installing hardscape lights, cross the wires behind the light itself. This gives additional wire length to work with if the fixture needs to be relocated or adjusted.
Customer Support
Rev Date: V1 05/01/2023
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>