GEARX P513.32X High Performance Car Flash Light User Guide

: June 17, 2024
: GEARX

Table of Contents

PRODUCT ANSTRUCATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**GEARX P513.32X High Performance Car Flash Light User Guide

**

PRODUCT ANSTRUCATION

RED EMERGENCY LIGHT POWER BUTTON
LED LIGHT POWER BUTTON
SEATBELT CUTTER
CHARGING INDICATOR
WINDOW HAMMER
TYPE-C INPUT
MAGNET
LED LIGHT
RED EMERGENCY LIGHT
TYPE-C CABLE

Before using the torch for the first time, it is imperative to remove the battery insulator. Failure to do so may result in the torch not functioning as expected. Unscrew the tail cap and gently remove the insulator.

SPECIFICATION

Light source unit : LED
Lumens : 500
Wattage : 10W Beam distance: 100M
Battery capacity : 1800mAh
Input information : Type-C
Operating hours : 9 hours on 30% (lowest brightness).
Charging time : 4 hours
Input information : Type-C 5V/2A

Please read the following instructions carefully and follow them to ensure that the product serves you safely and to your full satisfaction.

CHARGING INSTRUCTIONS

Connect the provided Type-C cable to the torch’s Type-C port and
compatible USB power source (e.g., wall adapter).
It is recommended to charge the torch fully before first use.
When charging the indicator light will turn red, and it will turn green once fully charged.

CONTROLS
The LED light on this torch has 3 main lighting modes: 100%-50%- 30%.
The red emergency light on this torch has 3 main lighting modes: Slow flashing-Quick flashing-S.O.S.
When double clicking the power button, the LED light will flash quickly. Click the button again to return to the previous light mode.

SEATBELT CUTTER
Hold the device firmly and position the seatbelt cutter blade against the seatbelt. Apply firm and even pressure to cut through the belt.

HAMMER
Hold the device securely and position the hammer head against the window. Swing forcefully to break the glass.

WARNING!

Ensure that the charging voltage matches the specifications.
Do not attempt to charge the torch in a damp or wet environment.
Do not disassemble, puncture, or expose the battery to extreme temperatures or open flames.
Avoid leaving the torch plugged in for extended periods after it has reached a full charge, as overcharging may reduce battery lifespan.
Store the torch in a cool, dry place away from direct sunlight or extreme temperatures.
When transporting, ensure the torch is switched off and securely stored to prevent accidental activation.
This torch is not waterproof. Avoid exposing it to water or moisture. Do not use it in wet or rainy conditions.
Allow for proper ventilation during operation. Do not cover or obstruct the torch’s vents, as this may lead to overheating.
Use the torch only for its intended purpose. Do not modify, alter, or repurpose it in any way.
Do not look directly into the light source, especially when it is at full intensity, as it may cause temporary visual impairment.
Keep out of reach of children and pets. The torch contains small parts that may pose a choking hazard.
Regularly inspect the torch for any visible damage. If found, do not use the light until it has been inspected and repaired by a qualified technician.
Follow local regulations and guidelines for the proper disposal of the torch and its components, including the rechargeable battery.
Do not leave the torch unattended while in use, especially around flammable materials.
Use seatbelt cutter with caution. Keep fingers away from the blade.
Do not use on any material other than seatbelt fabric.
Hold the device securely when using the life hammer.
Keep the life hammer away from face and body while in use.
Charge the torch regularly to maintain battery life.