cilate J68 Wireless Microphone User Manual

: June 16, 2024
: cilate

Table of Contents

Introduction
ID Diagram
How to use
About UI
Packing List
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wireless Microphone
User Manual
Seller Service Email: [email protected]

Introduction

Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required.
Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
This product consists of three parts: charging box, microphone transmitter and receiver
(as shown in the figure below, some models have no charging box, Based on the actual object ) cilate J68 Wireless Microphone - Figure
1

ID Diagram

cilate J68 Wireless Microphone - Figure 2

Windproof Net
Connection indicator light
Mute indicator light
Noise reduction indicator light
Battery indicator
Microphone Type-c charging port
Microphone clip
Key 1
Key 2
Mobile interface
Right indicator light
Left indicator light
Typ-c Receiver charging poart
Charging box Type-C charging port
Charging box indicator
Linght Receiver charging poart

How to use

Step 1: Connect the receiver to phone with port. cilate J68 Wireless
Microphone - Figure 3 Note: oppo / vivo /iqoo /realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply)
Step 2: Long press button 1 for 3 seconds, or remove it from the box. The connection indicator light will slowly flash green, indicating successful startup. Step 3: The indicator lights of the receiver and transmitter are always on, and the mobile phone turns on the camera for live broadcast Video and other APP can use microphone to pick up sound. cilate J68 Wireless
Microphone - Figure 5

Special Note:
For the use of port: there is no battery in receiver, and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through port.

About UI

Microphone Transmitter

Function	Button	LED
Power on	Long press the 3S button K1	Connection indicator light green

flashing slowly
Power off| Long press the 3S button K1| All the lights went out
Unconnected| | Connection indicator light green flashing slowly
Connected| Automatic pairing pairing pairing name: N9125| The connection indicator light remains on
Noise reduction/ acoustic switching| Click button K2 to turn off/on noise reduction| Off: Noise reduction indicator light off
On: Noise reduction indicator light on
Reverberation| Double click button K2 to turn reverb on/off| Off: The noise reduction indicator light flashes green slowly once
On: The noise reduction indicator light slowly flashes green three times
Silent mode| Double click button K1 to pause/resume recording| Off: Mute indicator light off
On: Mute indicator light on
Power display| | 40% -100% battery: The battery indicator light is green and always on
20% -40% battery level: The battery indicator light is yellow and constantly on
10% -20% battery level: The battery indicator light is red and always on
Below 10%: The battery indicator light flashes red once every 10 seconds
Charging| | Charging: 10% -20% battery indicator light, red light always on
Charging: 20% -99% battery indicator light, yellow light always on
Charging: 100% battery indicator light, all lights off

Note: Remove from the charging compartment and automatically start the machine. Automatically shut down if there is no connection for more than three minutes, By default. the noise reduction and reverb functions are turned on when turned on.

Receiver

Function	Operate	LED
Power on	Plug in the device and start it	Both the left and right lights

flash simultaneously
Connect a transmitter| | Left light remains on, right light 2 flashes
Connect two transmitters| | Both the left and right lights are constantly on at the same time

Charging BOX

Power display| The four lights from left to right indicate 25%, 50%, 75% and 100% of the power. The four lights on represent 100% of the power. Each 25% reduction in power will turn off one light.
---|---
Discharge state| The digital display light in the charging compartment is constantly on, and when the transmitter is fully charged, the digital display light goes out.
State of charge| The adapter charging cable is inserted into the Type-C port of the charging bin, and the current battery indicator flashes, and the indicator lights up when it is fully charged.