LANCOM GS-3528XP Fully Managed Access Switches User Guide
- June 9, 2024
- LANCOM
Table of Contents
LANCOM GS-3528XP Fully Managed Access Switches product
Parts
-
Configuration interface (Console)
Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring / monitoring the switch. -
TP Ethernet interfaces
Use Ethernet cables to connect the interfaces 1 to 24 to your PC or a LAN switch. -
SFP interfaces
Insert suitable LANCOM SFP modules into the SFP interfaces 25 to 28. Choose cables which are compatible with the SFP modules and connect them as described in the module’s documentation. -
Power connector (device back side)
Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord.
Before initial startup, please make sure to take notice of the information
regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a
nearby power socket that is freely accessible at all times.
Please observe the following when setting up the device
- The power plug of the device must be freely accessible.
- For devices to be operated on the desktop, please attach the adhesive rubber footpads
- Do not rest any objects on top of the device
- Keep all ventilation slots on the side of the device clear of obstruction
- Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.
- Please note that support service for third-party accessories is excluded.
Specifications
Hardware
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>