VSYSTO F4.5 Pro 4.5 Inch Screen WiFi Motorcycle Dash Cam User Manual

F4.5Pro Motorcycle Dash Cam
User Manual V1.1

◆ Product Accessories

After opening the package, please confirm whether the driving recorder is in good condition and the accessories are complete.

1. Host x 1
2. Cameras x 3
3. Power Cable x 1
4. USB Test Cable x 1
5. Cable Ties x 1 Set
6. Bracket x 1
7. Memory Card x 1(Optional)
8. GPS Module x 1
9. Wired Remote Controller x 1
10. Tire Pressure Sensors x 2 (Optional)

“Optional” mean it is not a standard configuration. Please refer to the product

◆ Product Appearance Diagram

▶ With the advancement of technology, the product structure and parameters will continue to be improved. The pictures and texts in this book are for reference only. If there are pictures or descriptions that do not match the actual product, please refer to the  actual display of the product.

◆ How to use

1. Quick Test and Installation
   Please refer to the “Quick Installation Guide”.

2. Insert the Memory Card
   Insert the memory card into the card slot until you hear “Da”. If you want to take out the card, gently press the memory card and slowly release it after hearing “Da”.
   Tips:
   ※Please insert the memory card in the correct direction.
   ※ Please do not pull out or insert the card when it is turned on to avoid damaging the video file and recorder.
   ※Please use the high speed Class10 or above genuine card.
   ※Please format the memory card regularly to keep it in good condition.

3. Power on/off
   After the recorder is properly installed, when you turn on the motorcycle power with the key, the recorder turns on. Pull out the key, the recorder turns off.

4. Video Recording
   1)Normal Recording Mode
   After the motorcycle power is turned on, the recorder will automatically start recording.When the motorcycle power is off, the recorder will automatically stop recording.
   ▶ Loop Recording: The recorder will save a file after recording for a period of time (the default setting is 3 minutes). When the memory card is full, the system will delete the oldest file. You can manually set the time of video recording in APP.
   1/2/3/5 minutes can be set, and front and rear camera files are saved in F and R folders respectively. The normal recorded video file is named “REC-xxxx”. Selfie camera files are also saved in R folder, video file is named “SEL- xxxx”.
   Note: This recorder cannot record and view images from 3 cameras at the same time. You can view and record a maximum of two cameras at the same time (front camera and rear camera, or selfie camera and front camera). Long press the up button of the  remote control to switch the selfie mode.
   2)Emergency Recording Mode
   ▶ G-Sensor emergency recording mode: When the motorcycle collides with other vehicles or the vibration is strong, the built-in G-Sensor will automatically activate the emergency recording mode. The LED indicator on the remote controller flashes  rapidly. The emergency video file is named “GSR-xxxx”. You can set the sensor sensitivity level in the menu or APP. The higher the sensitivity, the easier to trigger G-Sensor.
   ▶ Manual emergency recording mode: When the recorder is recording, short press OK button of wired remote controller to lock the current recorded video, and the selfie,front and rear cameras will capture a photo at the same time. The manually locked  video file is named “KEY-xxxx”.
   Tips:
   ※If the memory card is not inserted or is faulty, the video cannot be saved.
   ※”KEY” and “GSR” emergency video files can be saved 10 each. After more than 10, the system will automatically delete the earliest one.

5. View Video
   1)View on Mobile Phone
   Connect the recorder via WiFi, and view the real-time and playback video on the mobile APP (Android& iOS).
   2)View on Computer
   Put the memory card into the USB card reader, connect it to the available USB port on the computer, read the contents of the memory card, then select the video to play.
   Method 1 : Scan the corresponding QR code to download the latest APP from software download link of your browser.
   Method 2: You can search “VSYSTO” on Google Play or APP Store to download and install it.
   DVR WiFi Default Name: F4.5PRO_XXXX
   Default password: ****1234567890

   ---

https://itunes.apple.com/cn/app/wi-fi-camera/id1279724157| https://play.google.com/store/apps/details?id=com.sys.cardvr
---|---

Connection Steps:
①Turn on the recorder
②Enter the WiFi setting interface of the phone  find the corresponding WiFi name, and enter the  password to connect to WiFi
③Open mobile APP, connect the recorder
Tips:
※If “No network connection” is displayed when connecting to WiFi, please turn off the mobile data network first, and then connect to the recorder WiFi according to the steps. If the prompt “Current WLAN is unavailable, whether to switch to another network?”  appears, you must click “No”.
※After entering the APP, the recorder will pause recording. Please click the red recording button on the APP to start recording. After exiting the APP, the recorder will start recording in 30 seconds.
※You don’t need to connect to WiFi for daily riding. Connect when you need to watch the video.
※In case of connection failure, please contact customer service.
APP Setting Interface
※Pause recording video and then set it; It is recommended to set Level 0 or Level 1 for GST (G-sensor sensitivity). Do not set it too high.

6. Video File Format
   

◆ W5T Wired Remote Controller Operating Instruction

◆ Function Operation

◆ Playback Video Operation
In the video recording interface, long press the OK button once to switch to the setting interface. Use the up/down buttons to select the player icon. After selecting, short press the OK button once to enter the playback mode. Then select the video you want to  play, and short press the OK button once to start playing the video. The default is the video file of F folder, long press the up button to switch to the video file of R folder.

◆ License Plate Watermark Settings
To add license plate watermark, you need to create a new TXT document (Please contact customer service), edit the license plate number, and copy the document to the root directory of the TF card.
Plug in the host again, it will automatically update when you turn it on, and you can see the watermark of the license plate number set when playing the video.
If you want to delete the watermark of the license plate number, just find the system reset in the host menu setting interface. After resetting the system, the watermark will return to its default state.

ATTENTION
※ There is a temperature sensor inside the wire controller. If the wire controller is operated,it is normal to find that the temperature of the recorder rises.
※The built-in temperature sensor has a deviation of 2 degrees Celsius.
※The license plate number watermark can only use English letters and numbers, and the license plate number with special characters cannot be added.

◆ Images Information and Menu Description

1. After selecting, press  to enter Recording Mode.
2. The icon becomes larger to indicate that the function is selected.
   1. Character description on the display in recording mode:

1. After selecting, press to enter Playback Mode.
2. The icon becomes larger to indicate that the function is selected.
   1. Press ▲▼ to select the video to playback

Long press ▲ for 3 seconds in the Playback Mode to switch to the video files of F and R folder.
1. Front camera video files name identification: REC_The year, month, day, and time of current video F.MOV.
2. Rear camera video files name identification: REC_The year, month, day, and time of current video R.MOV.

1. After selecting, press to enter Setting Mode.
2. The icon becomes larger to indicate that the function is selected

min/3min
5.LCD Brightness| Display screen backlight brightness adjustment
6.Selfie mirror| When switching to the selfie camera mode, whether the selfie camera needs to turn on the  mirroring function
7.Parking monitoring| On/off
8.Parking monitoring sensitivity| Set the vibration sensitivity when parking
9.Recording Time After Flameout| Set recording time after flameout
10.Date format| 3 options, YYYY MM DD/MM DD YYYY/DD MM YYYY
11.Clock setting| Day&Time
12.Time zone selection| Time zone selection around the world
13.Date watermark| On/off
14.Speed watermark| Whether it is necessary to turn on/off the driving speed display when playing video on the  computer
15.Overspeed alarm| Set the overspeed alarm value. When the driving speed exceeds the preset value, the recorder will issue an alarm prompt
16.GPS status| Display the current number of satellites, longitude, latitude and other information
17.Unit system| Set the speed unit and temperature unit selection displayed when driving
18.TPMS tire pairing| Whether the tire needs to be paired with tire pressure sensors
19.Tire pressure unit| 2 unit options
20.Tire pressure alarm sound| On/off
21.Tire pressure alarm threshold| Set the alarm sound for the lowest and highest values of tire
22.Rear camera mirror| Whether mirror selection is required for the rear camera display
23.Protect Level| G-Sensor sensitivity level adjustment
24.Button sound| On/off
25.Voice prompt| On/off
26.System reset| Restore to the factory default settings
27.WiFi mode| On/off
28.Format SD card| Delete all videos from the memory card
29.FW version| Information about the current software version of the recorder

1. After selecting, press to enter Language Choosing Mode.
2. The icon be comes larger to indicate that the function is selected.
   1. Language identification — Corresponding to the selected language.
   2. The number of language choices depends on the actual model!
   ※The specific function depends on the actual situation.

◆ Auxiliary Display Mode

1. Long press the down button of the wire controller to enter the auxiliary display mode, and the driving speed is displayed on the first interface.
   

2. Short press the down button again to enter the tire pressure monitoring interface(optional).

3. Short press the down button again to enter the battery power display interface.
   

4. Short press the down button again to enter the GPS information interface.

5. Short press the down button again to enter the current mileage short-term memory interface.
   

6. Short press the down button again to enter the year,month,and day interface.

Tips:
※Speed, short-term memory, and location functions require GPS support.

◆ Quick Installation Guide

1. Quick Test

1. Connect the selfie camera, front and rear cameras to the host of the recorder.
2. Find the USB test cable from the accessories and connect the recorder with a 5V 2A power bank or USB charger. After the recorder is turned on, test the function of the recorder.
3. After the test shows that the recorder is normal, you can install it.
   If the output voltage exceeds 5V, the recorder may be burnt.
   After receiving the recorder, please connect the power bank or charger head with the test cable. After the test is completed, install the recorder on the motorcycle.
   ◆ Camera Bracket
   Install the camera body on the bracket,and tighten the screws to fix it after adjusting the proper angle.
   ※The cameras configured on different platforms may be different.Please refer to the actual products received.
   ◆ Cameras
   During installation, it is recommended to install the extension cable first, and then connect the host and camera separately (so that the installation is easier). If the distance between the host and the camera is less than 0.5 meters, it is recommended not to  use the camera extension cable (please keep the camera extension cable for future needs).

2. Install Power Cable
   ACC Power Cable Connection Method: The red wire is connected to the positive pole of the motorcycle battery, the black wire is connected to the negative pole, and the yellow wire is connected to the positive pole of motorcycle key control (12V ACC power  source).
   Tips
   The power cords configured for different models are different. Please refer to the products actually purchased.
   ※ Test is required after connection. After the motorcycle power is turned on, the recorder will turn on automatically. After the motorcycle flameout, the recorder is turned off. If you do not know the circuit of the motorcycle, it is recommended to find a  professional person to install it.

◆ GPS Module

Tear off the double-sided adhesive tape on the bottom of the GPS module and attach it to the proper position of the motorcycle (Note: The “GPS” icon of GPS shell must face to the sky directly. There can’t be anything above it, in case of the signal be shielded)

◆ Notes

• This product is an auxiliary (vehicle driving recorder) product for safe driving. Any loss caused by malfunction, information loss or using this product is irrelevant to our company.

• This product is an auxiliary device for recording external images of vehicles. Due to the different driving environment and vehicle environment, some functions will not support. The unscheduled firmware upgrade in order to improve the product will  change the performance of the product, and sometimes the camera will cannot record due to the environment, so the driving images recorded in this product is for reference only. The state of memory card will also lead to camera cannot record.

• Although this product can record and save the videos of accidents, it does not guarantee that all the accident videos can be recorded. Slight collision accidents can’t start the collision sensor, so the video may not be recorded in the specialized folder.

• Be sure to disconnect the power supply when inserting or pulling out memory card. For the stable use of the product, it is recommended to format the memory card twice a week.

• Generally memory card has a service life. Long-term use of memory card may cause the new data to be unable to save. In this case, it is recommended to buy a new memory card to use. Our company will not be liable for data destruction caused by the long- term use of memory card.

• Do not use high-pressure water gun or chemical solvent to clean the host, camera, power module and other parts (otherwise, no warranty will be given).

• Please do not use it in an environment with excessive dust density, so as to prevent cameras and other parts from being contaminated with dust, which will affect the video effect.

• Do not twist cables or cable connector during installation, and keep the recorder host and wires away from high-pressure areas.

• Please replace the spark plug with a spark plug with appropriate R value if there is interference in some motorcycle models.

• Do not disassemble, modify or repair this equipment by yourself. If the recorder fails due to this, we will not provide after-sales service.

• Some pictures, functions and specifications may change due to product or software upgrading.
  Please understand that we cannot notify you separately.

• For your safety, please do not install or operate this product while driving. Please use it within the scope permitted by law

• Disclaimer:Tire pressure sensors may not fit all vehicle tires. Please consult your vehicle manual or a tire professional whether the tire pressure sensors are fit your car. If they affect your vehicle’s performance, driving, or insurance coverage,do not install it!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>