SIM LAB 19-10-2023 Universal Vesa Instruction Manual
- June 15, 2024
- SIM-LAB
Table of Contents
SIM LAB 19-10-2023 Universal Vesa
Product Information
Specifications
- Version: 1.0
- Last updated: 19-10-2023
- VESA Compatibility: 100/100, 200/100, 200/200, 300/200
Product Usage Instructions
Before You Start
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Pleasecheck the bill of materials before starting (page 5) and make sure all the parts are delivered. This manual is rather simple, assembly depends mostly on the monitor or TV you are going to mount.
Inserting Slot-Nuts
If you forgot to install a Slot-Nut, you can still insert it into the slot from the side. Refer to the diagram in the manual for instructions. You can also use a smaller Hex wrench to help wiggle the Slot-Nut in place.
Mounting directly onto profile
If you want to mount the product directly onto a profile, please refer to the following page in the manual for detailed instructions.
Tools Needed:
- 4mm and 5mm Hex wrench
- 22mm and 7mm wrench
- Philips head screwdriver
Assembly Steps:
- Check the bill of materials to ensure all parts are included.
- Follow the instructions specific to your monitor or TV for mounting onto the Universal VESA plate.
- Use the provided bolts and screws to secure the monitor or TV to the VESA plate.
- Insert the slot nuts into the appropriate slots on the product.
- Use the Hex wrenches to tighten all bolts and screws securely.
FAQ
Q: What VESA sizes are compatible with this product?
A: This product is compatible with VESA sizes 100/100, 200/100, 200/200, and 300/200.
Q: How can I contact Sim-Lab support for assistance?
A: You can reach the Sim-Lab support department at support@sim- lab.eu.
Q: Is there a community where I can get help from experienced customers?
A: Yes, Sim-Lab has a Discord server where experienced customers can assist you. Visit www.sim-lab.eu/discord for more information.
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before starting and make sure all the parts are delivered. This manual is rather simple, assembly depends mostly on the monitor or tv you are going to mount. When mounting to a Vario VESA adapter, please refer to the following if needed: www.sim-lab.eu/vario-vesa-manual
Inserting Slot-Nuts
You got excited, finished the build, put the caps on, but forgot to install one element. Do not worry. It happens to everyone. In this diagram, you can see how to insert a Slot-Nut directly into the slot from the side. You can also use one of your smaller Hex wrenches to help wiggle the Slot-Nut in place.
Tools needed
Overview
BOX A – UNIVERSAL VESA HARDWARE KIT
#| Part| QTY| Note
A1| Universal VESA plate| 1| Machined.
A2| Bolt M6 X 20 DIN 912| 4|
A3| Bolt M6 X 16 DIN 912| 4|
A4| Bolt M6 X 16 DIN 7991| 4| Countersunk.
A5| Bolt M6 X 12 DIN 7991| 4| Countersunk.
A6| Screw M4 X 16 DIN 7985| 4| Philips head.
A7| Screw M4 X 10 DIN 7985| 4| Philips head.
A8| Washer M6 DIN 9021| 8| Big washer.
A9| Washer M6 DIN 125-A| 8|
A10| Slot-Nut M6| 4|
A11| Standoff M6 X 10| 4|
A12| Standoff M4 X 10| 4|
Disclaimer: for some entries on this page, we supply more than required as
spare materials. Don’t worry if you have some leftovers, this is intentional.
If you still have some questions regarding assembly of this product or about
the manual itself, please refer to our support department. They can be reached
at support@sim-lab.eu Alternatively, we now have
a Discord server where there are quite some experienced Sim-Lab customers
hanging out. They might just help you along if you ask them nicely 😉 www.sim-
lab.eu/discord If you feel like printing this
manual, please consider the environment before doing so. For the best results,
make sure you print at 100% scale without borders.
Product page on the Sim-Lab website: