Optonica 9156 LED STREET LIGHT User Manual
- June 5, 2024
- OPTONICA
Table of Contents
Optonica 9156 LED STREET LIGHT
Using and Maintenance:
Dimension:(mm)
- The luminaires shall be installed and maintained by qualified electrician andwired in accordance with the latest !EC electrical regualations or national requirements.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by the manufacturer or his service agent or a similar qualified person.
- To prevent the risk of electric shock, turn off power supply before installation. It is not permitted to connect the luminaire to high-voltage AC supply line directly.
- The luminaire is in accordance with EN 60598-1:2015 and European standards.
- The luminaire must be wired and grounded correctly.The input voltage and current must meet the requirements. The supplier will not be responsible for the consequences for inappropriate operation.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product waspurchased. They can take this product for environmentally safe recycling.
Operative instructions
- Choose how to install Iha street light if with Iha bracket in axis (Mada 1) or parpandicular to its body (Mods 2). Tha bracket can ba re/eased by removing Iha screws that attach to Iha street ligh
- Connect to Iha power fins using IP65 connectors and respecting Iha connection diagram.
- Insert the street light to the 11160mm pole, tightening the screws on it.
- After selecting the Installation Mode, you can further orient the street light by soma dagrea by sliding Iha screws on Iha groovas.(-10′-+10′)
- Finally, tighten definitively bracket’s screws to ensure it to the street light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>